How To Build Rural Septic Tank In The Philippines? (Correct answer)

  • Dig a trench that’s 4 × 26 × 3 ft (1.22 × 7.92 × 0.91 m). Use either a shovel or an excavator to make a hole in the spot where you want your tank. Keep digging until the hole is 4 feet (1.2 m) wide, 26 feet (7.9 m) long, and 3 feet (0.91 m) deep.

What is the standard size of septic tank in the Philippines?

The three chamber septic tank will measure 3.1 meters (10 feet) by 1.9 meters (6 feet) and will be 2.1 meters deep (almost 7 feet). The tank will have a concrete slab on the bottom, filled, steel reinforced hollow block walls and a concrete top with clean-out ports.

How is septic tank constructed?

Septic tank Consists of Top Slab, Bottom Slab with PCC Bed, Shear walls around the tank and a top cover (Opening) to check the level of Waste water.

How do you build a natural septic tank?

Homemade Septic Tank Treatment The ingredients required for this natural solution are the following: Water, Sugar, Cornmeal, and Dry Yeast. To concoct this mixture, first start by boiling roughly a half gallon of water. Add in 2 cups of sugar. The sugar will act as the first food your bacteria will eat!

How many leaching chambers in a septic tank are required in the Philippines?

Yet as cited Plumbing Code of the Philippines, residents and establishment owners are only required to have two-chamber septic tanks.

How deep should a septic tank be?

Septic tanks are typically rectangular in shape and measure approximately 5 feet by 8 feet. In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground.

How do I know if my septic tank is full in the Philippines?

Septic Tanks required routine maintenance, here are the sign that Septic Tanks are full and needed and immediate action:

  • Bad Odor.
  • Slow Drains.
  • Trouble Flushing.
  • Pooling Water.
  • Sewage Backup.

How many chambers should a septic tank have?

New tanks must have two chambers, while older tanks may have only one. The tank is often made from concrete, but other materials are also used. The tank works by settling and microbial digestion of waste.

How do you size a septic tank?

Septic Tank Size Calculation based Per User Consumption

  1. Cooking – 5 Liters.
  2. Bathing & Toilet – 85 Liters/Person, So for 5 person – 425 liters/Day.
  3. Washing cloths & Utensils – 30 Liters.
  4. Cleaning House – 10 Liters.
  5. Other – 5 Litres.

Is vinegar good for septic tank?

Baking soda and other common household solutions such as vinegar are not harmful to your septic system. Harsh chemicals such as bleach and ammonia can disrupt the good bacteria in your septic tank and should not be used as part of a septic treatment.

What is the best thing to put in septic tank?

The products below represent some of the best septic tank treatments available in their respective categories.

  • BEST OVERALL: Cabin Obsession Septic Tank Treatment.
  • BEST BUDGET: Green Gobbler Septic Saver Bacteria Enzyme Pacs.
  • BEST FOR CLOGS: Instant Power 1868 Septic Shock.

How do I add bacteria to my septic tank?

Flush a packet of brewer’s dry yeast down one toilet on the bottom floor of your house once a month. The yeast will help add “good” bacteria to your septic tank and break down waste.

How do I calculate the size of my septic tank in the Philippines?

How to Calculate the Septic Tank Capacity in Gallons. 3.14 x radius squared x depth (all in feet) = cubic capacity. Cubic capacity x 7.5 = gallons capacity.

Is septic tank required in the Philippines?

Presidential Decree No. 856 or Code on Sanitation of the Philippines requires that all houses covered by the system shall be connected to the sewer in areas where a sewerage system is available.

What is the minimum distance of septic tank to water source?

At least 15m from the nearest water supply. This is a minimum and should be more if the ground is rocky and fissures could take the outflow further. It should be at least 3m from the nearest building. Avoid areas where rainwater would stand or flow over the tank or vehicles could drive over it.

How Does a Septic Tank Work?

Mr. Fix-It-Up-For-The-Family You may save a lot of money if you understand how a sewage treatment system works—and what can go wrong—so that you can handle your own septic system maintenance.

How does a septic tank work?

Mr. Fix-It-Up-For-Us. By understanding how a septic tank works—and what may go wrong with it—you will be able to save a lot of money on septic system maintenance in the future.

Understand that a septic system is a cafeteria for bacteria

Bacteria are responsible for the proper operation of a septic system. They decompose garbage, resulting in water that is clean enough to safely trickle down into the earth’s surface. The entire system is set up to keep bacteria healthy and busy at all times. Some of them reside in the tank, but the majority of them are found in the drain field. 1. The septic tank is the final destination for all waste. 2. The majority of the tank is filled with watery waste, referred to as “effluent.” Anaerobic bacteria begin to break down the organic matter in the effluent as soon as it enters the system.

  1. A layer of sludge settles to the bottom of the container.
  2. 4.
  3. Scum is mostly constituted of fats, greases, and oils, among other substances.
  4. Grease and oils float to the surface of the water.
  5. (5) A filter stops the majority of particles from reaching the exit pipe.
  6. The effluent is discharged into the drain field.
  7. Effluent is allowed to leak into the surrounding gravel because of holes in the drain septic field pipe.
  8. The garbage is completely decomposed by aerobic bacteria found in gravel and dirt.
  9. Potable water seeps into the groundwater and aquifer system from the surface.

Septic Tank Clean Out: Don’t abuse the system

Septic systems that have been correctly planned and constructed require just occasional ‘pumping’ to remove the sludge and scum that has built up inside the tank. However, if you don’t understand how a septic tank works, you may unintentionally hurt or even destroy the system.

  • Drains are used to dispose of waste that decomposes slowly (or not at all). Cigarette butts, diapers, and coffee grounds are all known to cause issues. Garbage disposers, if utilized excessively, can introduce an excessive amount of solid waste into the system. Lint from synthetic fibers is emitted from washing machine lint traps. This substance is not degraded by bacteria in the tank and drain septic field. Bacteria are killed by chemicals found in the home, such as disinfecting cleansers and antibacterial soaps. The majority of systems are capable of withstanding limited usage of these goods, but the less you use them, the better. When a large amount of wastewater is produced in a short period of time, the tank is flushed away too quickly. When there is too much sludge, bacteria’s capacity to break down waste is reduced. Sludge can also overflow into the drain field if there is too much of it. Sludge or scum obstructs the flow of water via a pipe. It is possible for tree and shrub roots to obstruct and cause harm to a drain field. Compacted soil and gravel prevent wastewater from seeping into the ground and deprive germs of oxygen. Most of the time, this is caused by vehicles driving or parking on the drain field.

Get your tank pumped…

Your tank must be emptied on a regular basis by a professional. Pumping eliminates the accumulation of sludge and scum that has accumulated in the tank, which has caused the bacterial action to be slowed. If you have a large tank, it may be necessary to pump it once a year; but, depending on the size of your tank and the quantity of waste you send through the system, you may go two or three years between pumpings. Inquire with your inspector about an approximate guideline for how frequently your tank should be pumped.

…but don’t hire a pumper until you need it

Inspections and pumping should be performed on a regular basis. However, if you’re not afraid of getting your hands dirty, you may verify the sludge level yourself with a gadget known as The Sludge Judge.

It ranges in price from $100 to $125 and is commonly accessible on the internet. Once you’ve verified that your tank is one-third full with sludge, you should contact a professional to come out and pump it out completely.

Install an effluent filter in your septic system

Garbage from your home accumulates into three distinct strata. The septic filter is responsible for preventing blockage of the drain field pipes.

Septic tank filter close-up

The septic tank filter is responsible for capturing suspended particles that may otherwise block the drain field pipes. Obtain an effluent filter for your tank from your contractor and place it on the outflow pipe of your tank. (It will most likely cost between $50 and $100, plus labor.) This device, which helps to prevent sediments from entering the drain field, will need to be cleaned out on a regular basis by a contractor to maintain its effectiveness.

Solution for a clogged septic system

If your septic system becomes clogged and you find yourself having to clean the filter on a regular basis, you might be tempted to simply remove the filter altogether. Hold on to it. Solids, wastewater, and scum are separated into three levels in septic tanks, which allows them to function properly (see illustration above). Solids sink to the bottom of the container, where microbes breakdown them. The scum, which is made up of trash that is lighter than water, rises to the surface. In the drainage field, the middle layer of effluent leaves the tank and goes through an underground network of perforated pipes to the drainage field.

  • Keep the effluent filter in place since it is required by your state’s health law.
  • Waste particles might flow through the filter and clog the perforated pipes if the filter is not used.
  • Your filter, on the other hand, should not require cleaning every six months.
  • A good chance is high that you’re flushing filter-clogging things down the toilet, such as grease, fat, or food scraps.
  • A garbage disposal will not be able to break down food particles sufficiently to allow them to flow through the septic tank filtration system.
  • Plastic items, disposable diapers, paper towels, nonbiodegradable goods, and tobacco products will clog the system if they are flushed through it.
  • More information on removing lint from your laundry may be found here.
See also:  Why Is Extra Water In Septic Tank. Near The Drain? (Correct answer)

Get an inspection

Following a comprehensive first check performed by an expert, regular inspections will cost less than $100 each inspection for the next year. Your professional will be able to inform you how often you should get your system inspected as well as how a septic tank functions. As straightforward as a septic system appears, determining its overall condition necessitates the services of a professional. There are a plethora of contractors who would gladly pump the sludge out of your tank, but many, in my experience, are unable to explain how a septic system works or how it should be maintained.

A certification scheme for septic contractors has been established in certain states; check with your state’s Secretary of State’s office to see whether yours is one of them.

Also, a qualified inspector will be able to tell you whether or not your tank is large enough to accommodate your household’s needs, as well as the maximum amount of water that can be passed through it in a single day.

You may be able to boost the performance of your system by using a product such as RID-X to introduce bacteria into the system. As you learn more about how a septic tank works, your professional should be able to tell you whether or not your system will benefit from this treatment.

Alternatives to a new drain field

If an examination or a sewage backup indicate that your drain field is in need of replacement, the only option is to replace it completely. As a result, it’s important to talk with a contractor about other possibilities before proceeding with the project.

  • Pipes should be cleaned. A rotating pressure washer, used by a contractor, may be used to clean out the drain septic field pipes. The cost of “jetting” the pipes is generally around $200. Chemicals should be used to clean the system. A commercial solution (not a home-made one) that enhances the quantity of oxygen in the drain field should be discussed with your contractor before installing your new system. Septic-Scrub is a product that I suggest. A normal treatment will cost between $500 and $1,000. Make the soil more pliable. The practice of “terra-lifting,” which involves pumping high-pressure air into several spots surrounding the drain field, is authorized in some regions. Some contractors use it to shatter compacted dirt around the pipes. Depending on the circumstances, this might cost less than $1,000 or as much as $4,000 or more.

Protect your drain septic field from lint

When this device is in place, it inhibits lint from entering the system, especially synthetic fibers that bacteria are unable to digest. One of these filters, which I’ve designed and termed theSeptic Protector, was invented by me. An additional filter is included in the price of around $150 plus delivery. Learn more about how to filter out laundry lint in this article.

Don’t overload the septic system

Reduce the amount of water you use. The volume of water that flows into your tank, particularly over a short period of time, can be reduced to avoid untreated waste from being flushed into your drain field. Replace outdated toilets with low-flow ones, install low-flow showerheads, and, perhaps most importantly, wash laundry throughout the week rather than just on Saturday mornings to save water.

Meet the Expert

Septic systems, according to Jim vonMeier, are the solution to America’s water deficit because they supply cleaned water to depleted aquifers, according to vonMeier. He travels the country lobbying for septic systems, giving lectures, and giving testimony. For septic system inquiries, as well as information on the operation of the septic tank, contact him by email.

A Beginner’s Guide to Septic Systems

  • Septic systems are used to dispose of waste from homes and buildings. Identifying the location of the septic tank and drainfield
  • What a Septic System Is and How It Works Keeping a Septic System in Good Condition
  • Signs that a septic system is failing include:

Septic systems, also known as on-site wastewater management systems, are installed in a large number of buildings and houses. It is easy to lose sight of septic systems, which operate quietly, gracefully, and efficiently to protect human and environmental health due to their burying location. Septic systems are the norm in rural regions, but they may also be found in a lot of metropolitan places, especially in older buildings. It is critical to understand whether or not your building is on a septic system.

Is Your Home or Building on a Septic System?

It is possible that the solution to this question will not be evident. If a structure looks to be connected to a sewage system, it may instead be connected to a septic system. It is fairly unusual for tenants to be unaware of the final destination of the wastewater generated by their residence. Some of the hints or signs listed below will assist in determining whether the facility is served by a septic system or whether it is supplied by a sewer system:

  • Sewer service will be provided at a cost by the city or municipality. Pay close attention to the water bill to see whether there is a cost labeled “sewer” or “sewer charge” on it. If there is a fee for this service, it is most likely because the facility is connected to a sewage system. Look up and down the street for sewage access ports or manholes, which can be found in any location. If a sewage system runs in front of a property, it is probable that the house is connected to it in some way. Inquire with your neighbors to see if they are connected to a sewer or septic system. The likelihood that your home is on a sewer system is increased if the properties on each side of you are on one as well. Keep in mind, however, that even if a sewage line runs in front of the structure and the nearby residences are connected to a sewer system, your home or building may not be connected to one. If the structure is older than the sewer system, it is possible that it is still on the original septic system. Consult with your local health agency for further information. This agency conducts final inspections of septic systems to ensure that they comply with applicable laws and regulations. There is a possibility that they have an archived record and/or a map of the system and will supply this information upon request

All property owners should be aware of whether or not their property is equipped with an on-site wastewater treatment system. Georgia law mandates that the property owner is responsible for the correct operation of a septic system, as well as any necessary maintenance and repairs.

Locating the Septic Tank and Drainfield

Finding a septic system may be a difficult process. They can be buried anywhere in the yard, including the front, back, and side yards. After a few years, the soil may begin to resemble the surrounding soil, making it impossible to distinguish the system from the surrounding soil. It is possible that in dry weather, the grass will be dryer in the shallow soil over the tank and greener over the drainfield, where the cleansed water will be released, but this is not always the case, especially in hot weather.

  1. The contractor who built the house should have presented the initial owner with a map showing the tank and drainfield locations, according to the building code.
  2. The installation of the system, as well as any modifications made to it, would have been examined by your local health authority.
  3. Unfortunately, if the system is very old, any records related with it may be insufficient or nonexistent, depending on the situation.
  4. Look for the point at where the wastewater pipes join together if the building is on a crawlspace or has an unfinished basement.
  5. The sewer line that runs through the structure is referred to as the building sewer.
  6. To “feel” for the tank, use a piece of re-bar or a similar metal probe.
  7. If you use this free service, you may avoid accidentally putting a rod through your gas or water line.

Try to locate the tank after a rainstorm, when the metal probe will be more easily maneuvered through moist dirt.

This should be done with care; extreme caution should be exercised to avoid puncturing the building sewer.

A tank is normally 5 by 8 feet in size, however the dimensions might vary.

Be aware that there may be rocks, pipes, and other debris in the area that “feels” like the tank but is not in fact part of the tank.

However, it is possible to have the lid or access port positioned on a riser in addition to being on the same level as the top of the tank in some cases.

Once the tank has been identified, make a rough drawing of its placement in relation to the house so that it will not be misplaced again!

It may be easier to discover the drainage lines now that the tank has been identified, particularly if the area has been subjected to prolonged periods of drought.

How a Septic System Works

Typical sewage treatment system (figure 1). It is composed of three components (Figure 1): the tank, the drain lines or discharge lines, and the soil treatment area (also known as the soil treatment area) (sometimes called a drainfield or leach field). The size of the tank varies according to the size of the structure. The normal home (three bedrooms, two bathrooms) will often include a 1,000-gallon water storage tank on the premises. Older tanks may only have one chamber, however newer tanks must have two chambers.

  1. The tank functions by settling waste and allowing it to be digested by microbes.
  2. These layers include the bottom sludge layer, the top scum layer, and a “clear” zone in the center.
  3. A typical septic tank is seen in Figure 2.
  4. It is fortunate that many of the bacteria involved are found in high concentrations in the human gastrointestinal tract.
  5. Although the bacteria may break down some of the stuff in the sludge, they are unable to break down all of it, which is why septic tanks must be cleaned out every three to seven years.
  6. In addition, when new water is introduced into the septic tank, an equal volume of water is pushed out the discharge lines and onto the drainfield.
  7. The water trickles out of the perforated drain pipes, down through a layer of gravel, and into the soil below the surface (Figure 3).
  8. A typical drainfield may be found here.
  9. Plants, bacteria, fungus, protozoa, and other microorganisms, as well as bigger critters such as mites, earthworms, and insects, flourish in soil.
  10. Mineralogical and metallic elements attach to soil particles, allowing them to be removed from the waste water.
See also:  What Kind Of Septic Tank Does A Camper Need?

Maintaining a Septic System

The most typical reason for a septic system to fail is a lack of proper maintenance. Septic systems that are failing are expensive to repair or replace, and the expense of repairs rests on the shoulders of the property owner (Figure 4). Fortunately, keeping your septic system in good working order and avoiding costly repairs is rather simple. Figure 4. Septic system failure is frequently caused by a lack of proper maintenance. It is in your best interests to be aware of the location of the system, how it operates, and how to maintain it.

  • You should pump the tank if you aren’t sure when the last time it was pumped.
  • It is not permissible to drive or park over the tank or drainage field.
  • No rubbish should be disposed of in the sink or the toilet.
  • It’s important to remember that garbage disposals enhance the requirement for regular pumping.
  • When designing a landscape, keep the septic system in mind.
  • It is also not recommended to consume veggies that have been cultivated above drainfield lines (see Dorn, S.
  • Ornamental Plantings on Septic Drainfields.

C 1030).

Any water that enters your home through a drain or toilet eventually ends up in your septic system.

Don’t put too much strain on the system by consuming a large amount of water in a short period of time.

Additives should not be used.

Various types of additives are available for purchase as treatment options, cleansers, restorers, rejuvenator and boosters, among other things.

To break up oil and grease and unclog drains, chemical additives are available for purchase.

Pumping out the septic tank is not eliminated or reduced by using one of these systems.

They remain floating in the water and travel into the drainfield, where they may block the pipes. Acids have the potential to damage concrete storage tanks and distribution boxes.

Signs a Septic System is Failing

A failed system manifests itself in the following ways:

  • Sinks and toilets drain at a snail’s pace
  • Plumbing that is backed up
  • The sound of gurgling coming from the plumbing system House or yard odors that smell like sewage
  • In the yard, there is wet or squishy dirt
  • Water that is greyish in color that has accumulated
  • An area of the yard where the grass is growing more quickly and is becoming greener
  • Water contaminated by bacteria from a well

If you notice any of these indicators, you should notify your local health department immediately. An environmentalist from the health department can assist in identifying possible hazards. There are also listings of state-certified contractors available from the local health department, who may do repairs. Repairs or alterations to the system must be approved by the health department and examined by an inspector. Keep an eye out for any meetings that may take place between a health department inspector and a contractor to discuss repairs to your system.

  • Household garbage that has not been properly handled is released into the environment when systems fail.
  • It has the potential to pollute surrounding wells, groundwater, streams, and other sources of potable water, among other things.
  • The foul odor emanating from a malfunctioning system can cause property values to plummet.
  • Briefly stated, broken systems can have an impact on your family, neighbors, community, and the environment.
  • Septic systems are an effective, attractive, and reasonably priced method of treating and disposing of wastewater.

Figures 2 and 3 reprinted with permission from: CIDWT. 2009. Installation of Wastewater Treatment Systems. Consortium of Institutes for Decentralized Wastewater Treatment. Iowa State University, Midwest Plan Service. Ames, IA.

History of the current status and revisions Published on the 15th of August, 2013. Published on March 28th, 2017 with a full review.

Septic Systems

A septic system is a self-contained, underground wastewater treatment system that is highly efficient and environmentally friendly. Given the fact that septic systems treat and dispose of household wastewater on site, they are often more cost-effective than centralized sewer systems in rural areas where land is more expansive and homes are widely separated from one another. Septic systems are also straightforward in their design, which means they are less expensive to install and maintain in the long run.

  • A septic system is made up of two major components: a septic tank and a drain field (or leach field).
  • By way of the sewer pipe, wastewater is transported from the house to the septic tank.
  • Within the tank, the wastewater is organized into three layers.
  • A layer of sludge is formed at the bottom of the tank as solids that are heavier than water settle to the bottom.
  • It is the bacteria found naturally in wastewater that break down the solids that remain on top of the layers of sludge and scum that remain in the septic tank.
  • After passing through the septic tank, this layer of clarified liquid is discharged into the drain field or into a distribution device, which assists with distributing wastewater in a uniform manner throughout the drain field.
  • For the purpose of distributing wastewater, perforated pipes or drain tiles are laid through the trenches.

The wastewater is treated in the drain field by allowing it to gently flow out of the pipes and down into the soil, where it is absorbed by the soil. Gravel and dirt operate as biological filters, filtering out harmful bacteria.

Who approves Septic System Designs?

Among the responsibilities of the Albany County Health Department are the approval and regulation of on-site wastewater treatment systems, including home septic systems, and private water systems.

Maintenance Issues

In order for your septic system to function well, it must be properly maintained. The frequency with which you must pump the sediments out of your septic tank is determined by three key factors:

  • The number of people in your household
  • The amount of wastewater generated (based on the number of people in your household and the amount of water used)
  • And the volume of solids in the wastewater (for example, using a garbage disposal will increase the amount of solids in the wastewater)
  • Are all important considerations.

Despite the fact that your septic tank absorption field is normally not in need of care, you should follow the following guidelines to safeguard and extend its useful life:

  • It is not permissible to drive across the absorption field with automobiles, trucks, or heavy equipment. It is not recommended to put trees or bushes in the absorption field area because the roots of these plants can get into the pipes and cause them to get clogged. Hard surfaces, such as concrete or asphalt, should not be placed over the absorption field to prevent it from being absorbed. Grass is the ideal cover since it will aid in the prevention of erosion as well as the removal of excess water. Surface runoff from roofs, patios, driveways, and other locations should be diverted away from the absorption field.

In order to properly maintain their septic systems, homeowners should be aware of the following items that should never be flushed down the toilet or down the drain. These substances might cause the biological digestion that is going place inside the system to be overtaxed or destroyed, as well as clogging pumps and pipelines. Take care not to flush the items listed below:

  • Hair combings, coffee grounds, dental floss, disposable diapers, kitty litter, sanitary napkins, tampons, and cigarette butts are all examples of items that fall into this category. Condoms
  • Bandages made of gauze
  • Whether it’s fat, grease, or oil, Towels made of paper

Never flush chemicals down the toilet that have the potential to pollute surface and groundwater, such as:

  • Paints, varnishes, thinners, waste oils, photographic solutions, pesticides, and other chemicals

Where’s my septic tank?

There are a few solutions available if the previous homeowner failed to supply this critical information or if you have misplaced your original copy:

  • Your local DHEC office may have a copy of your building permit on file if your house was built within the last five years or fewer, according to the DHEC. A copy of a septic tank permit can be obtained from the local office by any individual or group, regardless of whether or not they own the land in question. Because of this, it is highly recommended that you have as much of the following information as possible ready at the time of your request.
  • Your local DHEC office may have a copy of your building permit on file if your home was constructed within the last five years or less, according to the DHEC. A copy of a septic tank permit can be obtained from the local office by any individual or group, regardless of whether they own the land. If you have as much of the following information as possible ready at the time of your request, the search process will go much more quickly:
  • You may also submit a request for a copy of the permission through our Freedom of Information office, although this is not mandatory. To obtain a copy through the Freedom of Information Office, please complete and submit a copy of the DHEC FOI form. Instructions are given with the application. If feasible, please include the information about the property that is stated above. When looking around your yard, search for manhole covers or lids that have been buried by grass or leaves if your house was constructed before 1990.
See also:  Why Can'T You Use Bleach With A Septic Tank? (TOP 5 Tips)

Tags

Septic Tank Alerts Septic Tank Alerts

What size of septic tank do I need?

Probably one of the last things on your mind when you are constructing a new house is the location of your septic system. After all, shopping for tanks isn’t nearly as entertaining as shopping for cabinetry, appliances, and floor coverings. Although you would never brag about it, your guests will be aware if you do not have the proper septic tank placed in your home or business.

septic tanks for new home construction

The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size. Of course, all of this is dependent on the number of people who live in the house as well as the amount of water and waste that will be disposed of through the plumbing system.

For the most accurate assessment of your septic tank needs, you should speak with an experienced and trustworthy sewer business representative.

planning your drainfield

Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.

  • Vehicles should not be allowed on or around the drainfield. Planting trees or anything else with deep roots along the bed of the drain field is not recommended. The roots jam the pipes on a regular basis. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Create easy access to your septic tank cover by placing it near the entrance. Easy maintenance and inspection are made possible as a result. To aid with evaporation and erosion prevention, plant grass in the area.

a home addition may mean a new septic tank

Do not make any big additions or renovations to your house or company until you have had the size of your septic system assessed. If you want to build a house addition that is more than 10% of your total floor space, increases the number of rooms, or necessitates the installation of new plumbing, you will almost certainly need to expand your septic tank.

  • For a home addition that will result in increased use of your septic system, your local health department will require a letter from you that has been signed and authorized by a representative of your local health department confirming that your new septic system is capable of accommodating the increase in wastewater. It is not recommended that you replace your septic system without the assistance of a certified and competent contractor.

how to maintain your new septic system

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area.

“We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. Septic systems are something we are familiar with from our 40 years of expertise, and we propose the following:

  • Make use of the services of a qualified specialist to develop a maintenance strategy. Make an appointment for an annual examination of your septic system. Utilize the services of an effluent filter to limit the amount of particles that exit the tank, so extending the life of your septic system. Waste items should be disposed of properly, and energy-efficient appliances should be used. Make sure you get your septic system professionally cleaned every 2 to 3 years, or more frequently if necessary, by an experienced and qualified expert
  • If you have any reason to believe that there is an issue with your system, contact a professional. It is far preferable to catch anything early than than pay the price later. Maintain a record of all septic system repairs, inspections, and other activities

common septic questions

Hire a qualified specialist to assist you in developing a maintenance strategy; and Maintain your septic system by scheduling an annual inspection. Utilize the services of an effluent filter to limit the amount of particles that leave the tank, so extending the life of your septic system. Use Energy-Efficient Appliances and properly dispose of waste products. Every 2 to 3 years, or as often as is necessary for your system, have your septic system cleaned by an experienced and qualified specialist.

Avoiding a problem in the first place is vastly preferable to paying a high price later.

How do I determine the size of my septic tank?

If you have a rectangular tank, multiply the inner height by the length to get the overall height of the tank. In order to find out how many gallons your septic tank contains, divide the number by.1337.1337

How many bedrooms does a 500-gallon septic tank support?

The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size.

How deep in the ground is a septic tank?

Your septic system is normally buried between four inches and four feet underground, depending on the climate.

How Far Should You Put the Septic Tank From the House?

Image courtesy of Kwangmoozaa/iStock/Getty Images.

In This Article

  • Amount of distance from the home
  • Basic safety concerns
  • Suggestions for a successful installation

For those who don’t have access to a municipal sewage system, an alternate solution, such as a septic tank and field lines, will be required. The design and operation of these systems are fairly straightforward. When designing a septic system, you must keep in mind the requirements of local construction codes as well as public health concerns.

Tip

For those who don’t have access to a municipal sewage system, an alternate solution, such as a septic tank and field lines, will be necessary. In terms of design and operation, these systems are fairly straightforward. When designing your septic system, you must take into account construction requirements as well as health and safety concerns.

Basic Safety Considerations

A septic tank and field lines will be required if your home does not have access to a municipal sewage system. The design and operation of these systems are quite straightforward. When designing a septic system, you must take into account construction codes as well as public health concerns.

Tips for a Successful Installation

Plan ahead of time to get your water supply switched on prior to installing your septic tank. You must fill the tank with water as soon as it is placed in its final position for this to be possible. This has absolutely nothing to do with the septic system itself, but it is a prudent precaution. In the event of a heavy downpour, the groundwater may swell and a septic tank may float out of the ground, even if it has been buried. If this occurs, contact a qualified professional immediately. Repairing any damage done to the lines or to the tank itself, as well as putting the tank back in its original location, may be a costly and time-consuming endeavor.

Initially, you may be confident that you will remember the exact location of the marker when it is time to top up the tank — which is generally every three to five years — but your memory may fade over time.

In the absence of a marker, you may end up digging holes in the wrong place when it is time to service the tank.

Leave a Comment

Your email address will not be published. Required fields are marked *