On average, the cost of installing a new septic tank system is $3,900. The price ranges from $1,500 to $5,000 for a typical 1,250-gallon tank, which is an ideal size for a three- or four-bedroom home. This cost is inclusive of the tank itself, which costs $600 to $2,100 or more, depending on the type.
Do septic tanks ever need to be replaced?
Unfortunately, septic systems don’t last forever. With regular maintenance and pumping, your septic system can last many years. However, after decades of wear and tear, the system will need to be replaced.
How long does a septic tank usually last?
Because it is expensive to replace a septic system, proper maintenance is important. The more proactive you are in maintaining your system, the longer it will last. In fact, septic tanks can last as long as 30 years or more.
What is the most expensive part of a septic system?
The leach field is the most important part of a properly functioning septic system. It is also the most expensive part of the septic system cost. It is easy to damage and expensive to replace.
How do I know if my septic tank is damaged?
8 Signs of Septic System Failure
- Septic System Backup.
- Slow Drains.
- Gurgling Sounds.
- Pool of Water or Dampness Near Drainfield.
- Nasty Odors.
- Unusual, Bright Green Grass Above Drainfield.
- Blooms of Algae in Nearby Water.
- High Levels of Coliform in Water Well.
What is the most common cause of septic system failure?
Most septic systems fail because of inappropriate design or poor maintenance. Some soil-based systems (those with a drain field) are installed at sites with inadequate or inappropriate soils, excessive slopes, or high ground water tables.
What are the signs that your septic tank is full?
Here are some of the most common warning signs that you have a full septic tank:
- Your Drains Are Taking Forever.
- Standing Water Over Your Septic Tank.
- Bad Smells Coming From Your Yard.
- You Hear Gurgling Water.
- You Have A Sewage Backup.
- How often should you empty your septic tank?
How do you tell if your septic tank is full?
How to tell your septic tank is full and needs emptying
- Pooling water.
- Slow drains.
- An overly healthy lawn.
- Sewer backup.
- Gurgling Pipes.
- Trouble Flushing.
What will ruin a septic system?
Any paper products like tissues, paper towels, tampons, or sanitary products, even some heavier toilet paper, will clog your system if you flush enough of it. Wet wipes are another product that you should never flush into a septic system.
What is the cheapest septic system?
Conventional septic system These conventional septic systems are usually the most affordable, with an average cost of around $3,000.
What are the 3 types of septic systems?
Types of Septic Systems
- Septic Tank.
- Conventional System.
- Chamber System.
- Drip Distribution System.
- Aerobic Treatment Unit.
- Mound Systems.
- Recirculating Sand Filter System.
- Evapotranspiration System.
Can you pump a septic tank too often?
If your septic tank is pumped too often, that bacteria will have no place to go but out into the drain field, which can lead to clogs and failures. So unless your septic tank’s sludge and scum levels reach certain thresholds, it’s actually beneficial to leave the septic tank alone.
Can I shower if my septic tank is full?
Only the water would get out into the leach field in a proper system unless you run too much water too fast. The thing to do is to run your shower water outside into it’s own drain area, but it may not be allowed where you are. Used to be called gray water system.
Does heavy rain affect septic tank?
It is common to have a septic back up after or even during a heavy rain. Significant rainfall can quickly flood the ground around the soil absorption area (drainfield) leaving it saturated, making it impossible for water to flow out of your septic system.
What causes a septic tank to back up?
Hydraulic overloading occurs when too much water rushes into the septic system at once, causing wastewater to back up into your drains. Space out high-volume activities like laundry, showering and running the dishwasher. Also, remember that unusually wet weather can contribute to hydraulic overloading.
How Much Does a Septic System Cost: Replacement and New
If your septic system is in need of replacement, call us today. Is it important for you to know how much it will cost to rebuild your septic system? In the event that you’re thinking of purchasing a home that will require a new septic tank system or obtaining a construction loan to develop a new property, you may be interested in knowing the average cost of a septic system. It is quite expensive to purchase such a system because it takes a substantial amount of labor from your contractor. A variety of factors influence the cost of a conventional septic system.
What is a Septic System, and How Does it Work?
A septic system is an underground wastewater treatment facility that is most commonly employed where there is no access to a municipal sewage system. Instead of urban regions, they are more typically seen in rural locations. A basic septic system is comprised of three components: a septic tank, a distribution box, and a leach field (or leach field). A leach field is also referred to as a drain field or a soil absorption field in some circles. A septic tank aids in the digestion of organic matter and the separation of floatable stuff such as fats, oils, and solids from wastewater in the treatment process.
The first septic tanks were put in place in the late 1800s, but it was not until the 1960s that they began to gain widespread acceptance.
How Much Does a Septic Tank Cost?
The cost of a septic tank is determined by a variety of factors. The number of bedrooms in your home is the single most important element in determining how much you will have to pay for a septic tank installation. More bedrooms imply a greater number of potential tenants, as well as a greater capacity septic tank required. The size of a septic tank for a three-bedroom house is typically 1000 gallons in capacity. The price of a 1000-gallon septic tank ranges from around $600 to $1200. Please keep in mind that the cost of a product might vary greatly depending on where you are located on a price spectrum.
A bigger septic tank will cost you between $1200 and $2000, depending on its size.
When it comes to septic systems, however, this is not where the most expensive parts of the system are located.
When considering the installation of a new septic system or the replacement of an existing one, consider how much money will be spent on the leaching area.
The location of your property, the quality of the soil, and the presence or absence of a water table are all factors that might influence the cost of your septic system installation.
The Cost of Septic System Installation
Understanding how much it will cost to replace a septic system is significantly more important than understanding how much it will cost to replace a tank. When compared to the expense of repairing a leach field, the cost of replacing a septic tank is comparatively affordable. The cost of replacing a leach field might range from $5000 to $50,000 or even more!. That is right; you read that correctly. The cost of a septic system replacement can vary greatly depending on a number of factors, including the soil’s health, the level of the water table, the presence of designated wetlands nearby, and the location of your property.
- The engineer will begin by doing a land survey to assess the costs of the system replacement.
- They will create what is known as a “as-built” model, which depicts how the system is put together.
- They make use of the information gathered from these tests in order to build a septic system that will work effectively.
- Due to the fact that clay-rich soils must be replenished by trucking in gravel, having clay-rich soils increases the cost of the project.
- Local health officials will almost certainly require that the septic system be elevated 3-4 feet above the water table.
- If your property is located in an area with a high water table, you might expect to pay a higher installation fee.
- Your installation expenses will be significantly increased as a result of this.
Who Installs Septic Systems?
A septic system is blocked by a business that is authorized to provide this type of service. Before selecting a septic installation firm, it is critical to conduct due diligence in the same way you would in any other business. Make careful you interview a number of different companies and obtain written estimates. A septic system replacement might cost anywhere from $1,000 to $10,000, depending on the provider you work with. Permitting, installation, and restoration charges for your yard should all be included in the quotation.
Speaking with relatives and friends for recommendations on people they know or with whom they have done business is something I would encourage.
If you’re still having trouble finding what you’re looking for, you may try searching for septic system installers near me, septic system installers nearby, or septic system contractors near me in the Google search engine. If you conduct this type of web search, you should receive some first ideas.
Why Do Septic Systems Fail?
Septic systems, like many other things, will eventually fail to work correctly after many years of use. The way you care for and maintain your system has a huge impact on how long it will endure and perform. For example, having a waste disposal in conjunction with a septic system is strongly discouraged. Food and other garbage are not intended to be flushed down the toilet or into a septic system. Over time, these obstructions can choke leach lines, resulting in a situation in which the system is unable to perform its functions correctly.
Only biodegradable items should be flushed down a toilet, according to EPA guidelines.
By properly maintaining your septic system, you may extend its life expectancy by several years.
Buying and Selling a Home With a Septic System
When purchasing or selling a house, it is essential to have the septic system inspected. It is a substantial obstacle to overcome, much like a house inspection. Nobody wants to purchase a lemon and then have to incur the additional price of replacing a septic system, which might cost thousands of dollars. Septic system inspections are required by law in certain places, and in others they are optional. A requirement known as Title Vrequires a seller in the state of Massachusetts to check their septic system before they may sell their home.
- Title V septic inspections are usually between $700 and $1000 in price.
- If the seller’s septic system fails the inspection, he or she has two options.
- By completing the escrow holdback, the agreed-upon closing date may be maintained uninterrupted.
- For example, if the cost of replacing the septic system is $20,000, they will request a holdback of $30,000 from the sale.
- Over the years, I’ve sold a number of homes that had a broken septic system, and we finalized the transaction by putting an escrow holdback on the property.
- As a result of your actions, you may find yourself in court.
Getting a Septic System Replacement Loan
Is it possible to receive a loan to rebuild your septic system?
This is a question that I’ve received several times throughout the years. Yes, and some governments will also give financial aid in the form of grants. Here is a list of resources that can assist you in obtaining finance for septic system replacement.
You Need a Permit for Your Septic System
It is necessary to get a permission from the county clerk’s office, the environmental or zoning department, or both, before you can begin your installation. Depending on the state you live in, you should anticipate to pay between $300 and $500 for this service. Permits for business usage might cost up to three times as much as residential permits.
When is the Septic Tank Installed During a New Build?
Your contractor will have to wait until the frame of the house is complete before doing the groundwork essential for the installation of the septic system. A hole excavated before to this time may cause problems with the building process and cause it to be delayed. Trucks parking on the lot would have to be carefully positioned in order to prevent hitting the hole, which might jeopardize the work and increase your expenditures. Most of the time, your contractor will include the cost of installing your septic system in the total cost of your project.
Here are some additional questions to ask a builder if you are constructing a home for the very first time.
Video: How to Find Your Septic System
What is the location of your septic system tank? In this video, you will learn some useful suggestions on how to locate your septic system.
What to Know About Septic System Maintenance
Because the cost of septic system installation and the materials necessary is significant, you want to be certain that it lasts as long as possible before replacing it. If it is maintained on a regular basis, you should experience less difficulties with it and it should last longer before it has to be replaced. Pumping and cleaning the tank that will be used to remove the sludge will usually be included in the maintenance schedule. This should help the drain field to endure for a longer period of time before it has to be replaced.
However, if you have a large family of 6 or more individuals, this may be necessary on a yearly basis.
In addition to your geographic location, the cost of tank maintenance is determined by how easy it is to get to the tank.
How Do You Know When a Septic Tank System Needs Replacing?
Septic systems are typically good for 20 to 30 years, and in some cases even longer, before they need to be upgraded or replaced. Some symptoms might suggest that there is an issue with your computer’s operating system.
If you have grass growing over your drain field, does the grass appear to be growing more vigorously than in other areas? Are there any plants in the vicinity that are growing at a higher rate than the rest of the plants? If you can’t identify any other reason for this to be happening, it might be a hint that the drain field isn’t performing as it is supposed to.
Having a puddle in your yard despite the fact that it hasn’t rained may indicate that your drain field isn’t performing as planned by the manufacturer.
Assuming that there is an unpleasant stench along with the puddles, you can expect to discover that your septic system has failed.
A blocked toilet flush and the appearance of clogged pipes might indicate that there is a problem with the plumbing system in your home. An foul stench in the home might also be an indication that something is wrong with your septic system and needs to be addressed.
A blocked toilet flush and the appearance of clogged pipes might indicate that there is a problem with the plumbing system. If you notice an unpleasant stench in your house, it might be a sign that something is wrong with your sewage system.
A septic system that does not function properly may cause well water to become contaminated, necessitating the need for immediate repair. If the local board of health determines that your property is filthy and has the potential to infect other properties in the area, they may decide to condemn it.
Cost to Replace a Septic System vs. Installing New
It is possible that you may need to replace your system, and the cost will be more than it would be if you had a new system constructed from the ground up. This might occur as a result of the price connected with the removal of the old system, as well as the possibility of contamination. In some cases, you may discover that all you need to do is replace the pump in order to have your septic system running properly once more. Pumps normally need to be replaced every 10 years and might cost between $1,000 and $2,000 to purchase and install.
When leach fields cease to function as intended, they nearly usually require replacement or repair.
Miscellaneous Septic System Repair Costs
Some components of a septic system may require replacement at some time in the future. Listed below are the options, together with their associated costs:
- The baffle is a component of the septic tank that prevents the accumulation of scum in the tank’s inlets and outflow pipes. It should be replaced every five years. Approximately $300-600 will be spent to replace it. Tank cover – Because the tank cover is composed of concrete, it is susceptible to deterioration over time. Approximately a few hundred dollars is required to replace one of these devices. a concrete distribution box (also known as a D-box for short) is a smaller tank that is responsible for distributing liquids out to the leach field. The average cost of replacing a distribution box ranges between $600 and $1300.
Can You Repair a Septic Leach Field?
Years ago, the answer to this question would have been no; a septic leach field could not be repaired. Today, the answer is yes. Today, it is more likely that you will be able to avoid the costly and time-consuming process of replacing the entire leach field. Septic aeration is a technique that has been developed. It is essentially a matter of adding oxygen to wastewater using aeration machines that dissolve oxygen to encourage aerobic digestion. A classic septic system operates in an anaerobic (oxygen-free) environment, resulting in the formation of a black, sludge-like layer in the leach field known as the biomat.
The septic system eventually fails as a result of this.
It may be built in a short amount of time.
How Septic Aeration Works
As a result of the aerobic bacteria, the amount of nutrients in the septic tank effluent that the biomat needed to survive and develop has been greatly reduced. The biomat eventually succumbs to the elements. Aerobic bacteria that exit the septic tank along with water that contains high amounts of dissolved oxygen feed on the biomat, causing it to shrink even further in size and effectiveness. The mechanism causes the biomat to diminish in size until it is no longer visible on the surface. It will take many weeks for the earth and sidewalls of the leach field to revert to a porous state, and the aerobic septic system will work as if it had just been constructed.
What you avoid with septic aeration is the need to dig up your yard and the expenditure of tens of thousands of dollars.
A septic system firm in your area should be able to offer you with such information as well. terralift aeration is a technique that may be used to treat a septic system in addition to the other methods mentioned.
Final Thoughts on The Costs of Septic Systems
In the construction of a home, septic systems are one of the most expensive components that must be purchased and installed. The cost of replacing a septic system can be quite expensive. Unfortunately, when it comes to increasing the market value of your property, rebuilding your septic system has minimal effect. This investment yields a poor return on its initial investment. A new septic system is not likely to have a substantial influence on the value of your house. This advice on the cost of replacing a septic tank and leach field should have been beneficial to you, and we hope you found it so.
If you need to reach Bill, you may do so through email at [email protected] or by phone at 508-625-0191.
Are you contemplating the sale of your home?
The following towns in Metrowest Massachusetts are served by my Real Estate Sales: Ashland; Bellingham; Douglas; Framingham; Franklin; Grafton; Holliston; Hopkinton; Hopedale; Medway; Mendon; Milford; Millbury; Millville; Natick; Northborough; Northbridge; Shrewsbury; Southborough; Sutton; Wayland; Westborough; Whitinsville; Worcester; Upton; and Uxbridge MA.
DescriptionFind out how much it costs to install a new septic system as well as how much it costs to replace an old septic system in this article.
Name of the publisher Real Estate Exposure to the Fullest Extent Logo of the publisher
Learn how much it costs to Install a Septic Tank.
Septic tanks range in price from $3,157 to $10,367, or an average of $6,743. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials range in price from $600 to $2,500, without labor. A comprehensive septic system, which includes a leach field (also known as a drain field), tank, and plumbing, can cost between $10,000 and $25,000 to install. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.
In the end, the cost of installing a septic tank is determined by the kind of system, the materials used, and the size of the tank.
This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.
Septic System Cost Estimator
Let’s run some numbers to see what the costs are.
What part of the world are you in? What part of the world are you in?
|Typical Range||$3,157 – $10,367|
|Low End – High End||$450 – $20,000|
The cost information in this report is based on real project costs provided by 943 HomeAdvisor users.
New Septic System Cost
Most tanks and systems cost between $2,000 and $10,000 to install a new typical anaerobic septic system. Aerobic systems range in price from $8,000 to $20,000. Depending on the size of your property, the composition of the soil, and the level of the water table, you may even have to pay an extra $10,000 or more for an alternative, specialized drain or leach field. Septic systems are composed of three major components:
- Septic tank: Either anaerobic (requiring no oxygen) or aerobic (requiring oxygen but more complicated but more efficient)
- Water runs to a leach field after it has been cleaned and separated in the septic tank, where it will naturally drain through sand, gravel, and soil in a cleaning process before reaching the water table
- Water table: Plumbing: A drainpipe to the tank, followed by another branching pipe to your field will be required.
Optional components include the following:
- Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or raised leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers
The installation of a traditional anaerobic system typically costs between $3,000 and $8,000 on average. Anaerobic systems are often less expensive to build than aerobic systems, which are more complicated. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the increased burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other components.
Aerobic Septic System Cost
Aerobic systems, which are those that require oxygen to work properly, cost on average between $10,000 and $20,000 per system. If you’re moving from anaerobic to aerobic fermentation, you’ll almost certainly need a second tank, but the conversion will only cost you $5,000 to $10,000. Aerobic systems break down waste more effectively in the tank than anaerobic systems, allowing you to use a smaller drain field in many cases – which is ideal for houses with limited space. An aerobic wastewater system is a wastewater system that depends on aerobic bacteria (bacteria that thrive in the presence of oxygen) to break down trash in the tank.
You’ll need an aerator as well as an electrical circuit that connects to the system to complete the setup.
Get Quotes From Local Septic Tank Pros
Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project. You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.
- Excavation costs $1,200–$4,500
- Building permits cost $400–$2,000
- And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
- The cost of septic tank material ranges between $500 and $2,000.
- Plastic and polymer materials cost $500–$2,500
- Concrete costs $700–$2,000
- And fiberglass costs $1,200–$2,000.
- 500: $500–$900
- 750: $700–$1,200
- 1,000: $900–$1,500
- 1,200: $1,200–$1,600
- 1,500: $1,500–$2,500
- 2,000: $3,000–$4,000
- 3,000: $4,500–$6,000
- 5,000+: $7,500–$14,000
- 500: $500–$900
- 1,200: $1,200–$1,
Leach Field Cost
Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield.
It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.
Alternative Septic Systems Cost
When you have a tiny property, a high water table, high bedrock, poor soil, or just wish to utilize less space, an alternate septic system is a good choice.
Mound Septic System Cost
Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.
Recirculating Sand Filter Septic System Cost
Sand filter septic systems range in price from $7,500 to $18,500. They can be built above or below ground depending on the situation. In order to disperse the wastewater in the ground, they employ a pump chamber to force the wastewater through a sand filter. The liner of the filter box is normally made of PVC. This is accomplished by pumping the effluent through the sand and returning it to the pump tank, where it is then disseminated throughout the ground.
Drip Septic System Cost
Drip systems range in price from $8,000 to $18,000, depending on the size and complexity. They operate in the same way as previous systems, with the exception that they employ extensive drip tubing and a dosage mechanism. They deliver lower dosages over a shorter period of time, which is particularly effective at shallow soil depths. This method is more expensive than a standard system since it requires a dosage tank, a pump, and electrical power to operate.
Evapotranspiration systems range in price from $10,000 to $15,000 per system. In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.
Built Wetland System
Built-in wetland systems range in price from $8,000 to $15,000, with the cost increasing if an aerobic tank is included. They are designed to simulate the natural cleaning process observed in wetland ecosystems. After traveling through a wetland tank, where it is treated by microorganisms, plants, and bacteria, it is returned to the soil. The waste also has the effect of assisting the growth of wetland plants and the population of microbes.
Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.
Septic Tank Replacement Cost
The installation of chambered systems ranges from $5,000 to $12,000.
Pipes are encircled by perforated plastic chambers that are frequently embedded in sand. Gravel is no longer required as a result of this method. The fact that they are quick and simple to install makes them more vulnerable to crushing forces, such as those caused by automobiles.
Septic System Maintenance Costs
It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:
Inspect and Pump Your Septic Frequently
Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.
- Initial inspection costs between $250 and $500
- Annual inspection costs between $100 and $150
- And camera inspection costs between $250 and $900.
Use Household Water Efficiently
A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water. Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.
Properly Dispose of Your Waste
Your septic system is responsible for disposing of everything that goes down your drains and toilets. One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless it is absolutely necessary. That implies you should never flush the following items down the toilet or drop them down the sink drain:
- Cooking grease or oil, baby wipes or wet wipes, dental floss, diapers, feminine hygiene products, cigarettes, cat litter, and paper towels are all examples of items that fall into this category.
Maintain Your Drainfield
The drainfield of your septic system is a component of the system that eliminates waste from the septic’s liquid. You should take steps to keep it in good condition, such as:
- Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You
A septic tank or septic pump tank can range in price from $350 to $14,000, depending on the material used and the size of the tank. In most home situations, you won’t have to spend more than $3,000 on the tank’s actual construction. The majority of big, high-priced units are intended for use in apartment buildings or as part of a communal sewage system.
Concrete Septic Tank Cost
Concrete tanks range in price from $700 to $2,000. The total cost of installation ranges from $2,300 to $6,500. They’re one of the most often seen forms of installation. Despite the fact that they are vulnerable to cracking and separation, they are often resilient for several decades.
It’s critical to have it carefully inspected on a regular basis for cracks and runoff, among other things. Inspections and frequent cleanings will assist to extend its useful life. Your professional can tell you how frequently you should get it inspected, but it’s normally every one to three years.
Plastic and Poly Septic Tank Prices
Septic tanks made of plastic range in price from $500 to $2,500 on average, not counting installation costs. Plastic is a long-lasting, lightweight, and reasonably priced building material. They do not break as easily as concrete and do not rust. Because of their small weight, plastics are more susceptible to harm during the installation process.
Fiberglass Septic Tank Prices
Fiberglass septic tanks are typically priced between $1,200 and $2,000, not including installation. Fiberglass does not split or rust readily, but it is prone to damage during the installation process, much like plastic. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.
It’s unlikely that you’ll ever see a new steel tank constructed. They will rust or corrode with time, no matter how well-made they are at the time. As a result, they are not permitted by many municipal construction rules, and you will only encounter them in existing installations. Steel is not a long-lasting material in the earth, and it is the least preferred.
Labor Costs to Install a Septic System
The cost of labor accounts for 50 percent to 70 percent of your overall expenses. Labor is typically more expensive than the tank itself in a normal installation, making it the most expensive option. For example, while the size required for a 3 to 4-bedroom home may cost between $600 and $1,100, the labor to install it might cost anywhere between $1,500 and $4,000.
Compare Quotes From Local Pros
Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000
DIY vs. Hire a Septic System Pro
The installation of a septic system is a time-consuming operation. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs. In addition, an unpermitted installation might make it harder to sell and insure a property when it is completed. Make a point of interviewing at least three pros before making a final decision. Contact a septic tank installation in your area now for a free quote on your job.
A septic tank has an average lifespan of 20 to 30 years, however it may live anywhere from 14 to 40 years, depending on the following factors:
- What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
- Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.
What are the signs I need a new septic tank?
There are a few indicators that it is time to replace your septic tank. These are some examples: If you smell sewage, you may have a solid waste problem in your septic tank that has to be dealt with immediately. Standing water: If there is no clear explanation for standing water, such as a significant rainstorm, it is possible that you have an oversaturated drain field, a damaged pipe, or a faulty septic system. A clogged septic tank will cause pipes to drain more slowly than they would otherwise be.
Construction on your home or the addition of more occupants will have an impact on your septic system.
pollution of nearby water: A septic tank leak can result in wastewater contamination, which can deposit nitrate, nitrite, or coliform bacteria in water sources around your property as a result of the leak.
If these bacteria are discovered in your vicinity, you should investigate your septic system to determine if it is the cause. Old age: If your septic system has reached the end of its useful life, it is time to replace it.
Does homeowners insurance cover septic systems?
Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.
How much do septic system repairs cost?
Repairing a septic system can cost anything from $600 to $3,000. Most tank repairs and replacement parts cost less than $1500 for each type of repair or replacement part mentioned below. Leach fields range in price from $2,000 to $20,000.
- Tank Pumps cost between $800 and $1,500. A septic tank that is placed below the drain field may necessitate the installation of a pump to transport wastewater to the drain field. Pumping costs between $300 and $600 per year. Pumping is required to remove solid waste from even a perfectly functioning system every two or three years, even if it is in good working order. Tank Lids cost between $100 and $300 to purchase and install. If you purchase the lid and attach it yourself, it will cost you between $50 and $150
- Tank Lid Risers range in price from $300 to $1,000. Deeply submerged tanks can have their lids raised to the surface by using these devices.
Still Have Questions About Septic Tanks?
The average cost of a new septic tank system is between $3,060 and $9,810 dollars. While high-end systems can cost up to $20,000, entry-level systems can be purchased for as little as $465. Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. Simply simply, trash is an unavoidable component of everyday existence. Septic tanks perform the dirty work for you, and they’re not particularly attractive. Anaerobic septic systems, which are the most common type, cost between $2,000 and $10,000.
Everything from the size of your property to its soil type and water table depth will determine which option is ideal for you.
How Much Does a New Septic Tank System Cost Near You?
In general, the cost of a new septic tank system is $6,420 on the national level, while particular costs vary from state to state depending on a variety of criteria. As a starting point, each state has its own set of fees and regulations for obtaining construction permits and licenses. Before starting a septic tank project, be sure you understand the requirements in your region. The cost of a septic system varies from area to region as a result of variations in soil composition across the country.
Septic tank system prices are around $3,000 in areas with sandy soil due to the lower labor and material expenses associated with well-drained soils in these locations.
As a result, expenses in New York, Washington, and Pennsylvania tend to be greater than in other states.
Septic Tank System Cost Breakdown
The entire cost of installing a septic system will ultimately be determined by three factors: the materials and labor necessary to complete the installation, as well as the cost of digging a leach field on your land.
Concrete, fiberglass, and plastic are some of the most often used materials in septic tank systems. Concrete tanks are the most commonly used because of their longevity; with regular care, they may survive for up to 30 years or more.
Concrete septic tanks typically cost between $700 and $2,000 on average. Plastic septic tanks are generally affordable, ranging in price from $500 to $2,500 per tank. On the other side, fiberglass tanks are more costly, ranging from $1,200 to $2,000 per tank.
It is possible that labor prices may vary by location and will be dependent on the size and materials used in the new septic tank system. However, in most cases, labor costs account for 50 percent to 70 percent of the overall cost of a septic tank system installation. Even though installation is more expensive than purchasing the tank alone, it is well worth it if you do not have the time or resources to undertake yet another home improvement project at this point in your life. Make certain that you and your contractor or plumber go over all of the specifics.
Additionally, construction permits, which normally cost between $400 and $2,000, and perc tests, which cost between $700 and $1,300 on average, are additional expenses that may or may not be included in your septic tank installation prices.
Leach fields, which are a type of trench, are used in conjunction with septic tank systems to collect and treat wastewater. It is the component of your septic system that returns the wastewater to the earth, often known as a leach field or drain field. Leach fields range in price from $2,000 to $10,000. Photo courtesy of Natalia / Adobe Stock
How Much Does a New Septic Tank System Cost by Type?
Each form of septic system has its own set of advantages and disadvantages. Even though anaerobic systems need less maintenance, they are not suitable for use on smaller parcels of land. Anaerobic systems, on the other hand, may function effectively in compact places but need additional effort.
Septic tanks can be classified as either anaerobic (requiring no oxygen) or aerobic (requiring oxygen). Anaerobic systems, which are more frequent, cost between $3,000 and $8,000 on average, according to the manufacturer. They are often less expensive to install than aerobic systems, but they are less efficient and need a bigger leach field than aerobic systems. In an anaerobic septic system, a pipe connects the home to the septic tank, and another pipe connects the septic tank to the leach field, where the waste is disposed.
This type of system does not require any additional electricity or chemicals, which makes it a popular choice among homeowners.
Aerobic septic systems make use of oxygen that is fed into the tank to activate bacteria that feed on the solid waste in the tank. These systems are more expensive than anaerobic systems, costing between $10,000 and $20,000, but they are more efficient and may be used effectively on smaller sites. In contrast to anaerobic systems, they require more electricity to function well. Connecting it to a backup power generator will guarantee that everything continues to function correctly in the event of a power loss.
How Much Does a New Septic Tank Cost by Style?
The size and location of your property will play a role in determining which type of septic tank system is best for your needs.
The mound or sand filter aerobic septic tank systems are recommended for smaller properties, while those with greater room have a wider range of alternatives.
Expect to spend more money if you choose a mound septic system, which may cost between $10,000 and $20,000 to install. A sand mound is constructed on top of the septic system region to collect wastewater that has been pumped out of the tank. Water is filtered via the sand before it enters the soil and groundwater. Even though these systems are costly, they are important in locations where the water table is high.
Sand filter septic systems employ a pump to force wastewater through a sand filter at a low pressure before it is released into the soil or groundwater, effectively treating and removing nutrients from the wastewater. Despite the fact that nutrients such as phosphorus and nitrogen are naturally found in trash, when they collect in surface water, they can degrade water quality and cause aquatic ecosystem harm. They range in price from $7,000 to $18,000 and may be constructed either above or below ground.
These systems are most effective in locations with high water tables or in areas where there are bodies of water nearby.
Chamber septic systems are identical to conventional systems, except that they employ plastic chambers in the leach field instead of gravel to collect the waste. They range in price from $5,000 to $12,000 to install. Chamber septic systems are excellent solutions for sites with varying input quantities, such as vacation homes or rental properties. You should avoid placing it near your driveway or parking area if you choose this type since driving over it might cause considerable (and stinky) harm.
Drainage systems that employ drip tubing and a dosing device to release smaller, scheduled dosages of waste on a regular basis are called drip septic systems. They are particularly effective in soils with a short depth. It takes more components to install a drip system than it does to install a traditional system, such as a dosing tank or a pump, and it may cost anywhere from $8,000 to $18,000, depending on the size of the system.
Evapotranspiration septic systems range in price from $10,000 to $15,000 and are particularly beneficial in dry regions and locations with thin soil. They have special leach fields that allow wastewater to evaporate from the top of an open-air tank, which is not common in other tanks. If you reside in an area where there is a potential of snow or rain, an evapotranspiration septic system should be avoided at all costs. The dampness might eventually cause them to collapse, and the repair process for a septic tank is not particularly attractive.
As you may have guessed, constructed wetland septic systems are designed to replicate the natural water treatment process found in wetlands.
Water is treated in a wetland tank by microbes, plants, and bacteria before being released back into the environment. As a result, the waste promotes the growth of plants and bacteria. The cost of these environmentally friendly systems ranges from $5,000 to $12,000.
What Factors Influence the Cost of a New Septic Tank System?
Several factors influence the cost of a septic tank installation project. In general, costs rise as the size of the organization grows. If landscaping and permits are necessary for the installation of your septic tank, you should budget an extra $600 at the very least. The sort of material you choose will also have an impact on the price, with plastic being very inexpensive when compared to concrete. Furthermore, if you choose a more customized design over a stock model, you will be responsible for the additional work costs.
As a result, the amount you pay will be determined by the location of your home as well as the soil type that surrounds your property.
FAQs About Septic Tank Systems
A septic system that has been poorly built can cause serious difficulties, such as water contamination and structural damage to your property. Repairs to a septic system are not inexpensive. Because of the high level of danger involved in constructing septic tanks, this process should be left to the professionals. Call around and talk about your requirements (as well as your budget) with a number of septic tank businesses in your region to find the ideal match.
What should I consider when installing a septic tank system?
A septic tank is an essential component of every property. Damage to your property as a result of structural failure or leaks may be costly, as well as dangerous to human and environmental health. It’s possible that the unpleasantness will even compel you to check into a motel for the night. Prior to establishing your septic tank system, take the following factors into consideration:
- Soil type
- Structural hazards (avoid places near cars or heavy machinery)
- The size of the property
- The size of the septic tank
- Future maintenance
- And the location of the tank
What other projects should I do at the same time?
Excavation is frequently required when installing a septic tank system (unless you opt for an above-ground tank). Once the excavators have broken ground, you may proceed with further subterranean projects that will save you time and money in the long run, such as:
- Establish underground utilities and construct a retaining wall before beginning work on the sprinkler system.
How Much Does a Septic Tank Cost? (2022)
The cost of replacing a septic tank typically ranges from around $3,000 to $10,000, depending on the type of tank your property requires, the size of your home, and the difficulty of the installation process. These variables can cause septic tank prices to vary greatly, and a whole septic system can be far more expensive than simply replacing a tank. Doing your research before making a purchase is a fantastic approach to ensure that you are receiving a decent price. When you have the appropriate knowledge, you’ll be prepared for what to expect and what reasonable rates for repairs and replacements look like when you begin making phone calls and getting estimates for your vehicle.
What is a septic tank?
It is an underground structure that cleanses tainted water that has been discharged from your residence. These tanks are often constructed of concrete, fiberglass, or polyethylene, and they are a component of a larger septic system that transports wastewater to the tank and then releases it when it has been properly treated. Connecting to a septic tank can be less expensive than connecting to a sewage system, and they are frequently more environmentally friendly. However, they can necessitate more upkeep and greater caution when it comes to what you flush down the toilet.
You may have the option of choosing between a septic system and an underground shared sewer system when building a new home, but most homeowners opt to keep the system that was installed when their home was constructed.
How does a septic tank system work?
Septic tanks, in general, work by separating floatable matter (such as oil) and solids from your home’s wastewater before discharging the remaining treated water into either the soil, sand, organic matter, wetlands, or other media, depending on the situation. The intricacies of how each form of system operates, on the other hand, will differ. An uncomplicated septic system is one in which both grey water and blackwater from your home drain into a holding tank. After a period of time, solids settle to the bottom of the tank while fats, oils, and grease float to the surface, forming scum.
Afterward, the scum and sludge are removed from the wastewater, and the treated water is discharged into the drainfield for further filtering and treatment.
Water is then continually filtered as it travels downhill through the soil before reaching the groundwater.
Types of septic systems
There are many different types of septic systems, but the two most common are as follows:
- Underground water treatment systems that use conventional (anaerobic) methods: These water treatment systems strain effluent (treated water) through stone or gravel in a drainfield. They’re normally best suited for single-family houses, and they’ll run you anywhere from $3,000 to $8,000 on average. Aerobic systems: These units increase the amount of oxygen in the tank, which accelerates the decomposition of organic waste. They can be utilized in situations when traditional systems may be ineffective, but they are more expensive, costing between $10,000 and $20,000 since they are more complicated.
Alternative system configurations include the following:
- Chamber systems: These systems are an alternative to traditional (anaerobic) systems that do not require the use of gravel. They’re less difficult to construct and are better suited for places with higher water tables. The cost of installing a chamber system is between $5,000 and $12,000
- Drip distribution systems (DDS): A DDS requires a secondary unit to retain wastewater once it has exited the septic tank, hence reducing the quantity of wastewater that may be discharged from the tank. The advantage is that it reduces the amount of dirt required in the drain field. A drip distribution system typically costs between $8,000 and $18,000
- However, the price might vary. Mound systems: If the drainage field is required to be elevated above the tank, a mound system will be necessary. The wastewater is pushed up to the drain field by a pump tank, which means that this system needs more power and requires more maintenance on average. They range in price from $10,000 to $20,000
- When your property is located on a high water table, this sort of system may be the best option for you. Recirculating sand filter systems A pump moves the effluent to a sand filtering system, where it is treated to remove the majority of toxins before it reaches the soil. It is estimated that the cost of these systems will range between $7,000 and $18,000. Evapotranspiration Systems: These systems are really only for persons who live in dry locations. The effluent evaporates into the atmosphere and never reaches the land or groundwater in this location. They cost between $10,000 and $15,000 to install
- Constructed wetland systems: These systems are designed to look and function like natural wetlands. They require more area in order to function correctly, but the effluent is fully filtered. They range in price from $8,000 to $15,000, with expenses increasing if you want to construct an aerobic tank.
Your tastes, household size, soil conditions, and property characteristics will all have an impact on which option is best for you.
Signs your septic tank is full
If you detect any of the following signs around your property, it is possible that your septic tank is either full or damaged:
- Drains take a long time to drain
- An inoperable or slow-flushing toilet
- A toilet that won’t flush at all
- The sound of gurgling after flushing a toilet or turning on the water The smell of sewage in the yard
- It is important to have a lush grass, especially surrounding your septic tank. a puddle of water on the lawn
Any of these indicators might indicate that something is wrong with your septic tank, but there is a significant difference between a damaged tank and a tank that is overflowing with waste. Pumping may be used to empty a clogged septic tank, and it should only cost you $300 to $600 to do so. A faulty septic tank, on the other hand, will require either repair or replacement, which will almost always result in a higher financial outlay.
How much does it cost to repair a septic tank?
If your tank isn’t functioning correctly, you might be looking at a $1,500 bill for repairs. However, it is possible that the problem is not with the tank itself, but with another component of the septic system. It all boils down to whatever portion of the system is malfunctioning:
- Pump repairs might cost anything from $250 and $400. The cost of replacing your filter will be in the $200 to $300 area. Repairing baffles might cost anything from $100 to $900. Septic line repairs typically cost roughly $1,500, but it is not uncommon for them to cost as much as $4,000 in some cases.
Generally speaking, if you can get your septic tank or system fixed while still getting many years out of it, that is the most advantageous alternative. Not all issues, on the other hand, can be resolved. Septic tank professionals should evaluate the following factors when advising you on whether repair or replacement is the best course of action for your home:
- Are puddles developing in a short period of time? Ponds in the yard aren’t usually a big deal, at least not in the long run. Puddles in the yard that form fast over night, on the other hand, are an entirely different story. The presence of puddles shows that the septic tank is nearly full, but it might also signal that there is a problem with the pipes or with the leach field, as well. The presence of large puddles often indicates a more serious problem, such as a damaged tank that would necessitate tank replacement. What is the size of your family? Septic tanks that are greater in size are required for larger homes. A bigger tank that can accommodate your growing family may be a smart choice if your home has increased over the years but your tank has not. How often do you find yourself in need of repairs? While a single repair isn’t a major concern, when repairs become more frequent, it’s time to take stock of your situation. A faulty septic system is almost certainly on its way out, which means you’ll have to pay to get it replaced.
Whether you’re repairing or replacing your unit, it’s important to remember that if your septic tank is still under warranty, you may expect to save a significant amount of money on your out-of-pocket expenditures. While some new septic tanks come with guarantees from the manufacturer, a house warranty may be available to cover older ones as well if they have been neglected.
However, should something go wrong with your septic tank, you may only be required to pay a modest service charge before your warranty provider covers the remainder of the cost of the repair or replacement.
How much does it cost to replace a septic tank?
A single-family home’s septic tank will cost between $3,000 and $10,000 to repair, depending on the situation. However, the price of your septic tank and the cost of installation are the two factors that have the greatest impact on your entire cost. The cost of a septic tank varies depending on the kind and size of the tank in question. Unless you wish to go bigger to allow future development, the size of your tank is normally dictated by the size of your household. There isn’t much flexibility there.
- Concrete tanks: The cost of a concrete tank before construction might range from $700 to $2,000
- Tanks made of fiberglass: A fiberglass tank can cost anywhere between $1,200 and $2,000 before installation. The cost of a polyethylene (plastic) tank is the most variable choice, ranging from $500 to $2,500 before installation
- Nonetheless, this is the least expensive alternative.
The use of steel tanks is also a possibility, although they are less popular and more susceptible to corrosion.
How much does it cost to install a septic system?
Installation fees typically account for 50 percent to 70 percent of the total cost of a septic tank replacement. In order to ensure that you’re receiving a decent bargain, it’s critical to shop around for estimates before making any decisions. Listed below is a breakdown of what your labor costs are used to fund:
- Perc test: A perc test analyzes the ability of your soil to absorb and filter water in a given amount of time. It entails the technician digging a 2- to 3-foot hole and pouring water into it to see how quickly the water disappears. A perc test will cost you anything from $750 and $1,850. Permits for construction: The cost of obtaining a construction permit varies from municipality to municipality. They normally cost between $400 to $2,250, but you may pay more if you want to construct an alternative septic system or if you live in a high-priced neighborhood. Costs of excavation: A completed wetland septic system should cost you between $1,200 and $4,500, but the cost will rise dramatically if you additionally install a pump or choose to go with the latter option. Traditional septic systems do not require electrical work, but any system that includes a pump or other mechanical device will necessitate the installation of electrical wiring and equipment. Due to the fact that your local electrician will decide the pricing and their effort is dependent on how much underground electrical line they have to build, it is difficult to estimate this cost.
The cost of your drain field or leach field, as well as the piping that connects your home to the tank, will be significantly higher if you’re building a septic system from the ground up from the beginning. A new drain field might cost up to $15,000, depending on its size.
How long does a septic tank last?
In general, septic tanks survive 20 to 30 years, although some can live up to 40 years or more. The material used to construct a septic tank, as well as how often it is cleaned, determine how long it will last. Steel septic tanks, which are less common, may rust out after 15 years, but many endure much longer. Concrete tanks have longer life spans, however they might be vulnerable to acidic soils due to their construction. Plastic and fiberglass tanks are less vulnerable to the weather, although structural degradation is a greater worry with these types of containers.
Pumping and maintaining your tank on a regular basis will guarantee that it continues to function properly for many years to come.
When dealing with septic tank problems, there is a lot to consider. Even while it is vital to seek expert counsel, it is also beneficial to be prepared so that you can make informed judgments. In order to learn about your alternatives, whether you’re budgeting for a new tank or attempting to maintain existing system functioning, it’s a good idea to shop about, study reviews, and obtain different quotations. If you’re just planning ahead or concerned about septic tank bills in the future, consider purchasing a home warranty to help cover the expenses.
The authors at ConsumerAffairs draw their inspiration for their work mostly from government statistics, industry experts, and original research published by other credible media. Visit ourFAQ page to find out more about the information on our site and how to use it.
- “Types of Septic Systems,” published by the United States Environmental Protection Agency (EPA). On September 26, 2021, the United States Environmental Protection Agency (EPA) published “How Your Septic System Works,” which was accessible online. United States Environmental Protection Agency (EPA), “How to Care for Your Septic System,” accessed on October 11, 2021
- “How to Care for Your Septic System.” On the 11th of October, 2021, it was accessible.
Did you find this article to be informative? |