How Much Does It Cost To Dig Out A Septic Tank?

Septic Tank Removal The average cost to pump out a septic tank is $250 to $600, and the additional cost to remove and dump a septic tank is approximately $5,500.

  • The tank must be emptied, dug out, removed, and properly and safely disposed of. The average cost to pump out a septic tank is $250 to $600, and the additional cost to remove and dump a septic tank is approximately $5,500. Photo: depositphotos.com

How deep should a septic tank be buried?

In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter. If you do not find the lid by probing, shallow excavation with a shovel along the tank’s perimeter should reveal the lid.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  • Your Drains Are Taking Forever.
  • Standing Water Over Your Septic Tank.
  • Bad Smells Coming From Your Yard.
  • You Hear Gurgling Water.
  • You Have A Sewage Backup.
  • How often should you empty your septic tank?

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

How do you bury an old septic tank?

Abandoning Septic Tanks and Soil Treatment Areas

  1. Remove and dispose of the tank at an approved site (normally a landfill).
  2. Crush the tank completely and backfill. The bottom must be broken to ensure it will drain water.
  3. Fill the tank with granular material or some other inert, flowable material such as concrete.

Where are most septic tanks located?

Toe the Line. Your septic tank will most certainly be installed along the main sewer line that runs out of your home. Look for the 4-inch sewer that exits the crawl space or basement, and locate the same spot outside the home. Septic tanks are usually located between ten to 25 feet away from the home.

How do I find my septic tank lid?

You can locate the lid of your septic tank by poking the ground every few feet with a metal probe. Lids can be buried up to a foot deep on average, so be sure to investigate any bumps that may indicate something is buried underneath.

What is the most common cause of septic system failure?

Most septic systems fail because of inappropriate design or poor maintenance. Some soil-based systems (those with a drain field) are installed at sites with inadequate or inappropriate soils, excessive slopes, or high ground water tables.

Can a septic tank never be pumped?

What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.

How often should you drain your septic tank?

Household septic tanks are typically pumped every three to five years. Alternative systems with electrical float switches, pumps, or mechanical components should be inspected more often, generally once a year.

What will ruin a septic system?

Any paper products like tissues, paper towels, tampons, or sanitary products, even some heavier toilet paper, will clog your system if you flush enough of it. Wet wipes are another product that you should never flush into a septic system.

How do you know if your septic system is failing?

The first signs of a failing septic system may include slow draining toilets and sinks, gurgling noises within the plumbing, sewage odors inside, continuing drainage backups, or bacteria in the well water. The area of the strongest odor will point to the location of the failure in the septic system.

Can a septic system last forever?

How long does a septic system last? On average, a new septic system will last for 20-30 years. Soil quality – the quality of soil will determine how durable your septic tank is. For instance, acidic groundwater can corrode a concrete septic tank.

Can you sell a house with an old septic tank?

If you’re selling a property with a septic tank, then you must be transparent with buyers about the fact the property uses a one and provide a detailed specification of the system. In fact, You are required by law to inform a buyer in writing about the presence of a septic tank.

Should old septic tanks be removed?

Septic tanks are decommissioned for safety reasons. If a tank is not going to be used any longer, the best decision is to render it inoperable. Tanks that were well constructed, as well as those that are surrounded by excellent soil for the drain field, can have a lifespan of 50 years.

Can you build a deck over a septic tank?

You should never build a deck over a septic field; doing so will prevent the natural draining and dissipation of the effluent. This can ruin the septic system, not to mention releasing foul smells into the air all around your deck. The dissipating effluent can also rot the deck from underneath.

Learn how much it costs to Install a Septic Tank.

Septic tanks range in price from $3,157 to $10,367, or an average of $6,743. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials range in price from $600 to $2,500, without labor. A comprehensive septic system, which includes a leach field (also known as a drain field), tank, and plumbing, can cost between $10,000 and $25,000 to install. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.

In the end, the cost of installing a septic tank is determined by the kind of system, the materials used, and the size of the tank.

This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.

Septic System Cost Estimator

Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?

National Average $6,743
Typical Range $3,157 – $10,367
Low End – High End $450 – $20,000

The cost information in this report is based on real project costs provided by 943 HomeAdvisor users.

New Septic System Cost

Most tanks and systems cost between $2,000 and $10,000 to install a new typical anaerobic septic system. Aerobic systems range in price from $8,000 to $20,000. Depending on the size of your property, the composition of the soil, and the level of the water table, you may even have to pay an extra $10,000 or more for an alternative, specialized drain or leach field. Septic systems are composed of three major components:

  • Septic tank: Either anaerobic (requiring no oxygen) or aerobic (requiring oxygen but more complicated but more efficient)
  • Water runs to a leach field after it has been cleaned and separated in the septic tank, where it will naturally drain through sand, gravel, and soil in a cleaning process before reaching the water table
  • Water table: Plumbing: A drainpipe to the tank, followed by another branching pipe to your field will be required.

Optional components include the following:

  • Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers

The installation of a traditional anaerobic system typically costs between $3,000 and $8,000 on average. Anaerobic systems are often less expensive to build than aerobic systems, which are more complicated. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the increased burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other components.

Aerobic Septic System Cost

Aerobic systems, which are those that require oxygen to work properly, cost on average between $10,000 and $20,000 per system. If you’re moving from anaerobic to aerobic fermentation, you’ll almost certainly need a second tank, but the conversion will only cost you $5,000 to $10,000. Aerobic systems break down waste more effectively in the tank than anaerobic systems, allowing you to use a smaller drain field in many cases – which is ideal for houses with limited space. An aerobic wastewater system is a wastewater system that depends on aerobic bacteria (bacteria that thrive in the presence of oxygen) to break down trash in the tank.

You’ll need an aerator as well as an electrical circuit that connects to the system to complete the setup. Small, mounded, or speciality fields may necessitate the addition of a dose or pump tank to assist in pushing effluent (sewage or wastewater) upward or out in batches.

Get Quotes From Local Septic Tank Pros

Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project. You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.

  • Excavation costs $1,200–$4,500
  • Building permits cost $400–$2,000
  • And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
  • The cost of septic tank material ranges between $500 and $2,000.
  • Plastic and polymer materials cost $500–$2,500
  • Concrete costs $700–$2,000
  • And fiberglass costs $1,200–$2,000.
  • 500: $500–$900
  • 750: $700–$1,200
  • 1,000: $900–$1,500
  • 1,200: $1,200–$1,600
  • 1,500: $1,500–$2,500
  • 2,000: $3,000–$4,000
  • 3,000: $4,500–$6,000
  • 5,000+: $7,500–$14,000
  • 500: $500–$900
  • 1,200: $1,200–$1,

Leach Field Cost

Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield. It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.

Alternative Septic Systems Cost

When you have a tiny property, a high water table, high bedrock, poor soil, or just wish to utilize less space, an alternate septic system is a good choice.

Mound Septic System Cost

Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.

Recirculating Sand Filter Septic System Cost

Sand filter septic systems range in price from $7,500 to $18,500. They can be built above or below ground depending on the situation. In order to disperse the wastewater in the ground, they employ a pump chamber to force the wastewater through a sand filter. The liner of the filter box is normally made of PVC. This is accomplished by pumping the effluent through the sand and returning it to the pump tank, where it is then disseminated throughout the ground.

Drip Septic System Cost

Drip systems range in price from $8,000 to $18,000, depending on the size and complexity. They operate in the same way as previous systems, with the exception that they employ extensive drip tubing and a dosage mechanism. They deliver lower dosages over a shorter period of time, which is particularly effective at shallow soil depths. This method is more expensive than a standard system since it requires a dosage tank, a pump, and electrical power to operate.

Evapotranspiration System

Evapotranspiration systems range in price from $10,000 to $15,000 per system. In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.

Built Wetland System

Built-in wetland systems range in price from $8,000 to $15,000, with the cost increasing if an aerobic tank is included. They are designed to simulate the natural cleaning process observed in wetland ecosystems.

After traveling through a wetland tank, where it is treated by microorganisms, plants, and bacteria, it is returned to the soil. The waste also has the effect of assisting the growth of wetland plants and the population of microbes.

Chambered System

Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.

Septic Tank Replacement Cost

The cost of replacing a septic tank ranges from $3,000 to $10,000. From 30 to 40 years, you may anticipate your system to serve you well. The system may crack or corrode as a result of the failure and the resulting contamination of groundwater with toxic waste is an issue. When this occurs, the well water may get polluted, the yard may become marshy, and the septic system may become inoperable or fail completely. Here’s a breakdown of the various components of a septic tank, along with an estimate of their usual costs: Replacement of a septic tank pump costs between $800 and $1,400.

Replacement of the filter costs between $230 and $280.

Drain Field Replacement Cost: $7,500.

Septic System Maintenance Costs

It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:

Inspect and Pump Your Septic Frequently

Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.

  • Initial inspection costs between $250 and $500
  • Annual inspection costs between $100 and $150
  • And camera inspection costs between $250 and $900.

Use Household Water Efficiently

A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water. Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.

Properly Dispose of Your Waste

Your septic system is responsible for disposing of everything that goes down your drains and toilets.

One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless it is absolutely necessary. That implies you should never flush the following items down the toilet or drop them down the sink drain:

  • Cooking grease or oil, baby wipes or wet wipes, dental floss, diapers, feminine hygiene products, cigarettes, cat litter, and paper towels are all examples of items that fall into this category.

Maintain Your Drainfield

The drainfield of your septic system is a component of the system that eliminates waste from the septic’s liquid. You should take steps to keep it in good condition, such as:

  • Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You

Keep your drainfield free of vehicles and parking; No trees should be planted near your drainfield. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment.

Concrete Septic Tank Cost

Concrete tanks range in price from $700 to $2,000. The total cost of installation ranges from $2,300 to $6,500. They’re one of the most often seen forms of installation. Despite the fact that they are vulnerable to cracking and separation, they are often resilient for several decades. It’s critical to have it carefully inspected on a regular basis for cracks and runoff, among other things. Inspections and frequent cleanings will assist to extend its useful life. Your professional can tell you how frequently you should get it inspected, but it’s normally every one to three years.

See also:  Aerobic Septic System Float Switch How Much To Leave In Tank? (Question)

Plastic and Poly Septic Tank Prices

Septic tanks made of plastic range in price from $500 to $2,500 on average, not counting installation costs. Plastic is a long-lasting, lightweight, and reasonably priced building material. They do not break as easily as concrete and do not rust. Because of their small weight, plastics are more susceptible to harm during the installation process.

Fiberglass Septic Tank Prices

Fiberglass septic tanks are typically priced between $1,200 and $2,000, not including installation. Fiberglass does not split or rust readily, but it is prone to damage during the installation process, much like plastic. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.

Steel

It’s unlikely that you’ll ever see a new steel tank constructed. They will rust or corrode with time, no matter how well-made they are at the time. As a result, they are not permitted by many municipal construction rules, and you will only encounter them in existing installations. Steel is not a long-lasting material in the earth, and it is the least preferred.

Labor Costs to Install a Septic System

The cost of labor accounts for 50 percent to 70 percent of your overall expenses. Labor is typically more expensive than the tank itself in a normal installation, making it the most expensive option. For example, while the size required for a 3 to 4-bedroom home may cost between $600 and $1,100, the labor to install it might cost anywhere between $1,500 and $4,000.

Compare Quotes From Local Pros

Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000

DIY vs. Hire a Septic System Pro

A look at how much septic tanks cost in different parts of the country is provided below. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York Colorado:$7,800 Idaho:$10,000

FAQs

A septic tank has an average lifespan of 20 to 30 years, however it may live anywhere from 14 to 40 years, depending on the following factors:

  • What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
  • Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.

What are the signs I need a new septic tank?

There are a few indicators that it is time to replace your septic tank. These are some examples: If you smell sewage, you may have a solid waste problem in your septic tank that has to be dealt with immediately. Standing water: If there is no clear explanation for standing water, such as a significant rainstorm, it is possible that you have an oversaturated drain field, a damaged pipe, or a faulty septic system. A clogged septic tank will cause pipes to drain more slowly than they would otherwise be.

Construction on your home or the addition of more occupants will have an impact on your septic system.

pollution of nearby water: A septic tank leak can result in wastewater contamination, which can deposit nitrate, nitrite, or coliform bacteria in water sources around your property as a result of the leak.

If these bacteria are discovered in your vicinity, you should investigate your septic system to determine if it is the cause. Old age: If your septic system has reached the end of its useful life, it is time to replace it.

Does homeowners insurance cover septic systems?

Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.

How much do septic system repairs cost?

Repairing a septic system can cost anything from $600 to $3,000. Most tank repairs and replacement parts cost less than $1500 for each type of repair or replacement part mentioned below. Leach fields range in price from $2,000 to $20,000.

  • Tank Pumps cost between $800 and $1,500. A septic tank that is placed below the drain field may necessitate the installation of a pump to transport wastewater to the drain field. Pumping costs between $300 and $600 per year. Pumping is required to remove solid waste from even a perfectly functioning system every two or three years, even if it is in good working order. Tank Lids cost between $100 and $300 to purchase and install. If you purchase the lid and attach it yourself, it will cost you between $50 and $150
  • Tank Lid Risers range in price from $300 to $1,000. Deeply submerged tanks can have their lids raised to the surface by using these devices.
Still Have Questions About Septic Tanks?

$800-$1,500 for a tank pump (depending on the model). Depending on the location of the septic tank in relation to the drain field, a pump may be required in order to transport wastewater up to the drain field. Pumping costs $300-$600 per year on an annual basis. In order to eliminate the solid waste, even a fully functioning system will require pumping every two or three years. Purchase and installation of a tank lid will cost between $100 and $300. If you buy the lid and attach it yourself, it will cost you only $50-$150.

In the case of heavily underground tanks, they elevate the lid level to the surface.

NationalAverage Cost $375
Minimum Cost $250
Maximum Cost $895
Average Range $295to$610

Septic systems are installed in 35.7 million houses in the United States, according to the American Ground Water Trust. This implies that no matter where you reside, there should be a sufficient number of specialists accessible to pump your septic tank at a reasonable price.

This pricing guide covers:

  1. Septic systems are installed in 35.7 million houses in the United States, according to the American Ground Water Trust, which indicates that no matter where you reside, there should be a sufficient number of specialists accessible to pump your septic tank at a reasonable price.

How Often Do You Need To Pump Your Septic Tank?

It is necessary to pump out your septic tank, according to the United States Environmental Protection Agency (USEPA), if the scum layer is within 6 inches of the outflow pipe. When considering whether or not to put off the$375job, bear in mind that a septic system replacement may cost upwards of $10,000, but good maintenance can extend its lifespan to up to fifty years. Every three years, it is advised that you pump your tank. Most wastewater tanks can hold three years’ worth of a household’s wastewater before they need to be removed and disposed of.

Signs That Your Septic Tank Is Full

  • Having difficulty flushing the toilets and draining the sink
  • The presence of foul scents in your house
  • Water accumulating over your drain field
  • Backlog in your sewer system A grass that is excessively healthy over your septic bed

Septic Tank Cleaning Cost By Size

When determining how frequently your septic tank should be emptied, it’s critical to understand the amount of your tank’s holding capacity. Make certain to obtain the exact size from the previous homeowner in order to ensure that your plans for pumping out the septage are adequately matched to your family size and water usage. While building codes will vary slightly from state to state, an average baseline guide would look something like this:

  • Homes with one or two bedrooms that are less than 1,500 square feet have a 750-gallon septic tank that costs $250 to pump
  • Homes with three bedrooms that are less than 2,500 square feet have a 750-gallon septic tank that costs $250 to pump Cleanout of a 1,000-gallon septic tank, which costs $375. Homes having four bedrooms that are smaller than 3,500 square feet: A septic tank with a capacity of 1,250 gallons that costs $475 to empty

Return to the top of the page

Don’t pump your septic tank if.

  1. Your property has been flooded
  2. The tank may have risen to the surface and damaged the pipes, or floodwater may have entered the tank when it was opened. Remember that you don’t know how old or delicate your tank is
  3. It might collapse while being pumped, so get it inspected before allowing someone to pump it. In this case, it’s not necessary to check the amount of sludge unless you believe there has been a leak and it should be checked
  4. An empty tank implies that the tank cannot be tested within two weeks of a septic inspection and test.

Septic Tank Emptying Breakdown

To put the figures into context, a typical adult in the United States will consume an average of one quart of food every day. In your septic system, you’ll find the majority of that quarter gallon of water. When multiplied by the number of days in a year, this equates to around 90 gallons of solid waste generated per adult. Assuming that the usual performance of most septic systems involves a 50 percent decrease in solids, this translates into 45 gallons per person per year on an annual basis.

In accordance with environmental regulations, septic tanks should not be allowed to be more than 30 percent full, which places the pumping schedule at approximately 30–31 months if all four family members are present all day, everyday.

However, this is rare, and most families are absent for most of the day. Return to the top of the page

Liquid Waste

On the website of the United States Geological Survey, the majority of people in the United States use between 80 and 100 gallons of water per day, including flushing the toilet (3 gallons), taking showers (up to 5 gallons per minute, with newer showers using about 2 gallons), taking a bath (36 gallons), washing clothes (25 gallons), and running the dishwasher (13 gallons). Hand-washing dishes, watering the grass, brushing teeth, drinking and cooking water, and washing your hands and face are all examples of factors that contribute to global warming.

If you have a family of that size, it is recommended that you get it pumped every three years.

Septic System Pumping Process

According to the US Geological Survey website, the average person in the United States uses between 80 and 100 gallons of water per day, which includes flushing the toilet (3 gallons), taking showers (up to 5 gallons per minute, with newer showers using about 2 gallons), taking a bath (36 gallons), washing clothes (25 gallons), and running the dishwasher (25 gallons) (13 gallons). Hand-washing dishes, watering the grass, brushing teeth, drinking and cooking water, and washing your hands and face are all examples of activities that contribute to water pollution.

If you have a family of that size, it is recommended that you get it pumped every 3 years.

  • Take note of the liquid level in the tank to verify there isn’t a leak
  • Reduce the pressure of the tank’s vacuum hose
  • Get the garbage moving by pumping it into the truck. Keep an eye out for any backflow, which might indicate a drainage problem. Backflush the tank to remove any leftover sludge and clean it thoroughly. Examine the tank for signs of damage.

Return to the top of the page

Helpful Information

Listed below is a summary of the most important pieces of information that the contractor can tell you in connection to the work that has been done on your property. Run through the specifics of this list with them so that they are prepared to take notes as they are pumping the water.

  • Name of the pumping firm, its address, phone number, and the name of the contractor
  • Compartments
  • The number of compartments The number of gallons that have been eliminated from your system
  • The state of the septic tank
  • A problem with the baffles in the septic tank Provide specifics on any further work performed on baffles or lids. Provide specifics on any work performed on the septic tank and/or pump
  • Specifications for measuring the level of scum and sludge
  • Any further work has been completed

Not only will this information be beneficial to you as a homeowner, but it will also provide future buyers of your house the assurance that the system has been properly maintained as well. The system will also tell you when to plan the next pumping session depending on the sludge levels present at the time of the last pumping session. Return to the top of the page

Septic Tank System Maintenance

This website, maintained by the Environmental Protection Agency, contains a vast body of information regarding septic systems, including some helpful advice on how to handle your septic system in order to preserve its long life and save any unneeded costs. Simple factors such as the ones listed below will make a significant difference:

  • Keep your tanks pumped and examined on a regular basis. Make an effort to reduce the amount of wastewater created in your house by using high-efficiency toilets, showerheads, and washing machines. Please keep in mind that everything that is flushed or poured down the sink will end up in your septic system. This includes grease and oil
  • Wipes
  • Hygiene products
  • Floss
  • Diapers
  • Cat litter
  • Coffee grinds
  • Paper towels
  • Home chemicals and other substances. Keep your vehicle from parking or driving on top of your drain field. Plant just grass on top of your tank and drain field
  • Otherwise, don’t bother. Take precautions to ensure that any rainfall runoff from your house or property is diverted away from your drain field
  • If possible, avoid using items that purport to clean your tank because they almost always cause more harm than good.

Return to the top of the page

Septic Tank Repair Costs

The replacement of your septic system’s filter is the most typical repair you’ll have to do. Installing a high-quality filter in your septic tank will cost you around $230.

Additional repairs include fittings, pipes, risers, and lids, all of which may be repaired for less than $100 in the majority of cases. It may also be necessary to replace your septic pump at other periods. This repair will typically cost around $500 to complete.

Soil Fracturing

It may be necessary to clean the drain field lines, replace the filter, or fracture the soil if your septic professional is unable to pump your system. This procedure, which includes blasting a 300-pound burst of air down a hollow tube in the ground, costs around $1,500 to complete.

Septic Tank System Cost

Was it determined by the septic cleaning service that you could require a new system? The average cost of a standard septic tank for a three-bedroom house is $3,250 dollars. In the Midwest, it may be possible to construct a good conventional system for less than $5,000, however in coastal locations, it may be necessary to spend $10,000 or more. The costs of a designed system will approximate roughly $15,000 on average. Return to the top of the page

How A Septic Tank Works

A septic system works by collecting all of the wastewater from your house through underground pipes and storing it in a subterranean tank that is often built of concrete, plastic, fiberglass, or other durable material. It is important to note that after wastewater is placed in the tank, it will remain there until the particles separate from the liquids. At that time, the sediments will sink to the bottom of the tank and create a sludge, while the oils and grease will rise to the top and form scum.

  1. The perforated pipes of the following set of pipes are used to guarantee equitable distribution over the whole drain field.
  2. As the effluent passes through the soil and gravel, dangerous coliform bacteria are naturally filtered out and eliminated from the water by the natural filtration process.
  3. Maintaining your septic tank properly, which involves periodic removal of sludge every 2–3 years, will prevent the solids from rising to the height of the exit pipe for the effluent fluids and traveling with them, which is not the case if there is an exit filter installed.
  4. Return to the top of the page

Questions To Ask Your Pro

  1. What is your per-gallon rate, and is the cost of finding the tank lids included in the quoted price? If not, what is the cost of that? What is included in the price of digging up the ground to obtain access to the bin lids? If not, how much do you charge per lid if you do not have a set rate? Is the removal of the septage included in the price? If not, what is the cost of that? This might add an extra $25–$100 to your bill. Is the price of the baffle inspections inclusive of all inspections? If not, what is the cost of that? Is there an additional price if you are working with a system that hasn’t been properly maintained? What is the hourly rate for that?
See also:  How Much Does It Cost To Pump A Septic Tank In Massachusetts? (Best solution)

Reduce the number of qualified septic tank pumpers on your list to 3-5 for the maintenance of your tank. Look for individuals who have the greatest number of checks against the following items:

  • Founded and operated a firm over a long period of time
  • Received an A+ rating from the Better Business Bureau
  • We provide same-day service around the clock
  • We are certified and insured

Free septic system estimates from reputable septic service providers are available on HomeGuide.

How Much Does a Septic Tank System Cost?

Septic businesses who are reliable and trustworthy will provide you with free estimates on HomeGuide.

  • Total cost: $3,900 on average
  • $1,500 to $5,000 on a sliding scale
  • Anaerobic septic tanks cost between $2,000 and $5,000
  • Aerobic septic tanks cost between $10,000 and $20,000
  • Gravity septic tanks cost between $1,500 and $4,000
  • Mound septic tanks cost between $10,000 and $20,000
  • Chamber septic tanks cost between $1,500 and $5,000
  • Conventional septic tanks cost between $2,000 and $5,000.

Approximately $3,900 on average with a range of $1,500 to $5,000; Anaerobic septic tanks range in price from $2,000 to $5,000, while Aerobic septic tanks range in price from $10,000 to $20,000. Gravity septic tanks range in price from $1,500 to $4,000, while Mound septic tanks range in price from $10,000 to $20,000.

What Is a Septic Tank?

Total cost: $3,900 on average; $1,500-$5,000 on a sliding scale; Anaerobic septic tanks range from $2,000 to $5,000; Aerobic septic tanks range from $10,000 to $20,000; Gravity septic tanks range from $1,500 to $4,000; Mound septic tanks range from $10,000 to $20,000; Chamber septic tanks range from $1,500 to $5,000; Conventional septic tanks range from $2,000 to $5,000.

How Much Does It Cost to Install a Septic Tank?

In most cases, a new septic tank system will cost you around $3,900 to install. It costs between $1,500 and $5,000 to install a conventional 1,250-gallon tank, which is the perfect size for a three- or four-bedroom house. This price includes the tank itself, which ranges in price from $600 to $2,100 or more depending on the size and kind. Workman’s compensation is included in the price of the installation and often ranges from $1,500 to $4,000.

Types of Septic Tank Systems

In most cases, a new septic tank system will cost you around $3,900 to install. The cost of a conventional 1,250-gallon tank, which is an appropriate size for a three- or four-bedroom home, ranges from around $1,500 to $5,000. This price includes the tank itself, which ranges in price from $600 to $2,100 or more depending on the size and configuration. Workman’s compensation is included in the installation fee, which typically ranges from $1,500 to $4,000.

Anaerobic Septic System

Anaerobic systems are a popular alternative for many homes since they don’t require any additional electricity or chemicals to function properly. Anaerobic systems include microorganisms that do not require oxygen to exist and hence are called anaerobic systems. Solid waste is broken down by microbes, and any leftover liquid waste is pumped out and spread beneath the surface of the soil. The garbage is naturally recycled when the water seeps into the ground and returns to the environment. The installation of these devices is between $2,000 and $5,000.

Aerobic Septic System

Aerobic systems, in contrast to anaerobic systems, make use of microorganisms that do not require oxygen to live. To activate the bacteria in the tank, oxygen is injected into it, and the bacteria then feed on the solid waste. Aerobic systems perform effectively in soils that are unsuitable for other systems and in areas where the groundwater table is elevated. It is an excellent choice for residences that are close to a body of water. Aerobic systems are more costly to install than anaerobic ones.

Gravity Septic System

Gravity septic systems employ gravity to filter and move water through the system. They must be put on a mild slope in order to allow water to flow without the use of a pump. The cost of installation ranges from $1,500 to $4,000.

Conventional Septic System

A standard septic system is comprised of a septic tank and a trench that serves as a drain field for the collection of waste. The trench is built on stone or gravel and is designed to allow water to move through it easily.

In order to prevent sand or dirt from contaminating the clean soil, geofabric is laid over the top of the trench and secured in place. In order to function properly, a traditional septic system requires a huge amount of room. The installation of these devices is between $2,000 and $5,000.

Mound Septic System

If your groundwater table is close to the surface, a mound septic system is the most appropriate option for your situation. An area for the septic system is prepared, and a sand mound is built to allow effluent from the tank to be pumped into the mound in modest amounts. The sand then acts as a filter, preventing the water from reaching the soil and groundwater. This design necessitates a large amount of floor space. They’re also expensive to install since a sand mound needs to be built before they can be utilized.

Chamber Septic System

Chamber septic systems have lately gained popularity as an alternative to traditional septic systems. They are comparable to conventional systems, with the exception that plastic chambers, rather than gravel, are utilized in the drain field. These are less difficult to build and have a lower carbon footprint. The cost of installing them ranges from $1,500 to $5,000.

Septic Tank Materials

Another aspect that influences cost is the type of material used to construct your septic tank. The following are some of the most often seen materials:

Concrete

Concrete septic tanks are the most prevalent form of septic tank because they are extremely long-lasting and reliable. They can survive for 20 to 30 years if they are properly maintained. Concrete, on the other hand, may break with time. When concrete is reinforced with rebar, the strength of the concrete is increased when subjected to pressure. Because of its weight, installation is more difficult and necessitates the use of specialized equipment. The cost of a typical-sized concrete tank ranges from $720 to $2,050 dollars.

Fiberglass

Fiberglass does not deteriorate when utilized underground, and because it is nonporous, it will not support the formation of algae. Because of the tank’s modest weight, it is easy to install. You won’t have to worry about cracking since, unlike concrete, it will not expand or shrink as the weather changes. The typical cost of a fiberglass tank is between $1,600 and $2,000.

Plastic

Tanks made of plastic are lightweight and simple to install. They’re also fairly long-lasting. Plastic tanks range in price from $830 to $1,400 on average, depending on the kind.

Steel

In spite of steel’s strength and durability, septic tanks built of steel are susceptible to rust and collapse if not properly maintained. As a result, several municipal governments have tightened their restrictions in order to discourage their usage. Typically, you’ll discover them in regions where the system was already in operation. If you are able to have one installed, they range in price from $900 to $9,900.

What Size Septic Tank Do You Need?

The size of your septic tank is normally decided by the number of bedrooms in your house. This is used to calculate the amount of water that will flow through the system on a daily basis. In general, the expense of a system increases in direct proportion to its size.

Two Bedrooms

A septic system with a minimum of a 750-gallon septic tank is required for a two-bedroom residence.

However, in many localities, a 1,000-gallon tank is the least capacity that may be accommodated.

Three Bedrooms

A minimum of a 1,000-gallon water tank is required for a three-bedroom residence, which handles around 360 gallons of water each day on a daily basis.

Four Bedrooms

A bigger tank, with a minimum volume of 1,250 gallons, is required for a four-bedroom residence. It is capable of handling around 480 to 600 gallons of water each day. Additional Related Articles:

  • How to keep the cost of septic tank pumping to a bare minimum
  • 3 Symptoms of Sewer and Septic System Problems
  • Do you have a clogged sewer line? Here’s What You Should Do
  • Water Sewer Line Repair: Do It Yourself or Hire a Professional
  • Listed here are 15 common plumbing problems that every homeowner should be aware of.

Septic Tank Repair Costs

It’s conceivable that only a certain component of your septic tank has to be replaced rather than the complete tank. Repairs and replacement parts can be purchased for a fraction of the cost of a complete system replacement. The following are some of the most often seen repairs:

Drain Field

Drain fields can get overloaded and flood, resulting in sewage backing up into toilets and sinks. The cost of replacing a drain or leach field ranges from $3,500 to $11,000.

Tank Pump

A replacement septic tank pump typically costs between $500 and $1,200.

Tank Filter

It is the most typical type of filter change that is performed by homeowners. It typically costs between $230 and $280.

Tank Lid

Concrete coverings and steel lids may break and corrode as a result of exposure to the elements. In most cases, you can repair a septic tank lid on your own for about $35 and $60. In most cases, having it changed by a professional is more expensive.

Tank Baffle

The baffle is responsible for directing wastewater through the septic tank. A replacement baffle piece will cost between $23 and $44 dollars.

Additional Factors to Consider

A septic tank can be built either below or above ground, depending on your preferences. Because of the amount of excavating and footing preparation required, installing a tank underground is a pricey endeavor. Underground septic tanks necessitate the construction of a drain field that can accommodate a soakaway. In addition, because the soakaway allows for part of the wastewater to drain into the ground, the tank will require less emptying over time. Over time, this might result in a reduction in your expenditure.

Some demand that an inspector check and approve the site, which might result in a fee being charged to the homeowner.

How Long Does a Septic Tank Last?

The lifespan of a septic tank varies based on the material used and the type of system used. The lifespan of a septic tank might be reduced if the tank becomes clogged due to roots or floods from groundwater. Septic systems have a lifespan of 15 to 20 years on average. Maintaining your septic tank on a regular basis is the most effective approach to extend its life. Keep in mind that maintaining your tank entails more than just draining out the contents; it’s also crucial to have a professional evaluate your tank on a regular basis and perform routine maintenance.

In the event that you have a plan in place, you can call our 24-hour repair hotline anytime a covered problem develops. We’ll dispatch one of our locally based, licensed, and highly qualified professionals to complete the work for you right away.

How Much Does a New Septic Tank System Cost?

The average cost of a new septic tank system is between $3,060 and $9,810 dollars. While high-end systems can cost up to $20,000, entry-level systems can be purchased for as little as $465. Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. Simply simply, trash is an unavoidable component of everyday existence. Septic tanks perform the dirty work for you, and they’re not particularly attractive. Anaerobic septic systems, which are the most common type, cost between $2,000 and $10,000.

Everything from the size of your property to its soil type and water table depth will determine which option is ideal for you.

How Much Does a New Septic Tank System Cost Near You?

In general, the cost of a new septic tank system is $6,420 on the national level, while particular costs vary from state to state depending on a variety of criteria. As a starting point, each state has its own set of fees and regulations for obtaining construction permits and licenses. Before starting a septic tank project, be sure you understand the requirements in your region. The cost of a septic system varies from area to region as a result of variations in soil composition across the country.

Septic tank system prices are around $3,000 in areas with sandy soil due to the lower labor and material expenses associated with well-drained soils in these locations.

As a result, expenses in New York, Washington, and Pennsylvania tend to be greater than in other states.

Septic Tank System Cost Breakdown

The entire cost of installing a septic system will ultimately be determined by three factors: the materials and labor necessary to complete the installation, as well as the cost of digging a leach field on your land.

Materials

Concrete, fiberglass, and plastic are some of the most often used materials in septic tank systems. Concrete tanks are the most commonly used because of their longevity; with regular care, they may survive for up to 30 years or more. Concrete septic tanks typically cost between $700 and $2,000 on average. Plastic septic tanks are generally affordable, ranging in price from $500 to $2,500 per tank. On the other side, fiberglass tanks are more costly, ranging from $1,200 to $2,000 per tank.

Labor

It is possible that labor prices may vary by location and will be dependent on the size and materials used in the new septic tank system. However, in most cases, labor costs account for 50 percent to 70 percent of the overall cost of a septic tank system installation. Even though installation is more expensive than purchasing the tank alone, it is well worth it if you do not have the time or resources to undertake yet another home improvement project at this point in your life. Make certain that you and your contractor or plumber go over all of the specifics.

Additionally, construction permits, which normally cost between $400 and $2,000, and perc tests, which cost between $700 and $1,300 on average, are additional expenses that may or may not be included in your septic tank installation prices.

Leach Field

Leach fields, which are a type of trench, are used in conjunction with septic tank systems to collect and treat wastewater. It is the component of your septic system that returns the wastewater to the earth, often known as a leach field or drain field. Leach fields range in price from $2,000 to $10,000. Photo courtesy of Natalia / Adobe Stock

How Much Does a New Septic Tank System Cost by Type?

Each form of septic system has its own set of advantages and disadvantages. Even though anaerobic systems need less maintenance, they are not suitable for use on smaller parcels of land. Anaerobic systems, on the other hand, may function effectively in compact places but need additional effort.

Anaerobic

Septic tanks can be classified as either anaerobic (requiring no oxygen) or aerobic (requiring oxygen). Anaerobic systems, which are more frequent, cost between $3,000 and $8,000 on average, according to the manufacturer. They are often less expensive to install than aerobic systems, but they are less efficient and need a bigger leach field than aerobic systems. In an anaerobic septic system, a pipe connects the home to the septic tank, and another pipe connects the septic tank to the leach field, where the waste is disposed.

This type of system does not require any additional electricity or chemicals, which makes it a popular choice among homeowners.

Aerobic

Aerobic septic systems make use of oxygen that is fed into the tank to activate bacteria that feed on the solid waste in the tank. These systems are more expensive than anaerobic systems, costing between $10,000 and $20,000, but they are more efficient and may be used effectively on smaller sites. In contrast to anaerobic systems, they require more electricity to function well. Connecting it to a backup power generator will guarantee that everything continues to function correctly in the event of a power loss.

How Much Does a New Septic Tank Cost by Style?

Aerobic septic systems make use of oxygen that is put into the tank to activate microorganisms that feed on the waste. At $10,000 to $20,000, these systems are more expensive than anaerobic systems, but they are more efficient and may be used effectively on smaller sites. However, they do require greater electricity to function in comparison to anaerobic systems. Connection to a backup generator will ensure that everything continues to function correctly in the event of a power failure. In any other case, aerobic systems can be connected to the main power supply for your home or business.

See also:  What Happens To Septic Tank Sludge? (Solution)

Mound

Expect to spend more money if you choose a mound septic system, which may cost between $10,000 and $20,000 to install.

A sand mound is constructed on top of the septic system region to collect wastewater that has been pumped out of the tank. Water is filtered via the sand before it enters the soil and groundwater. Even though these systems are costly, they are important in locations where the water table is high.

Sand Filter

Mound septic systems are more expensive to build, costing between $10,000 and $20,000 to do so. A sand mound is erected over the top of the septic system area to collect wastewater that is pumped from the tank. Water is filtered by the sand before it enters the soil and groundwater system. Even though these systems are costly, they are important in locations where the water table is particularly high.

Chamber

Chamber septic systems are identical to conventional systems, except that they employ plastic chambers in the leach field instead of gravel to collect the waste. They range in price from $5,000 to $12,000 to install. Chamber septic systems are excellent solutions for sites with varying input quantities, such as vacation homes or rental properties. You should avoid placing it near your driveway or parking area if you choose this type since driving over it might cause considerable (and stinky) harm.

Drip

Drainage systems that employ drip tubing and a dosing device to release smaller, scheduled dosages of waste on a regular basis are called drip septic systems. They are particularly effective in soils with a short depth. It takes more components to install a drip system than it does to install a traditional system, such as a dosing tank or a pump, and it may cost anywhere from $8,000 to $18,000, depending on the size of the system.

Evapotranspiration

Evapotranspiration septic systems range in price from $10,000 to $15,000 and are particularly beneficial in dry regions and locations with thin soil. They have special leach fields that allow wastewater to evaporate from the top of an open-air tank, which is not common in other tanks. If you reside in an area where there is a potential of snow or rain, an evapotranspiration septic system should be avoided at all costs. The dampness might eventually cause them to collapse, and the repair process for a septic tank is not particularly attractive.

Built Wetland

As you may have guessed, constructed wetland septic systems are designed to replicate the natural water treatment process found in wetlands. Water is treated in a wetland tank by microbes, plants, and bacteria before being released back into the environment. As a result, the waste promotes the growth of plants and bacteria. The cost of these environmentally friendly systems ranges from $5,000 to $12,000.

What Factors Influence the Cost of a New Septic Tank System?

Several factors influence the cost of a septic tank installation project. In general, costs rise as the size of the organization grows. If landscaping and permits are necessary for the installation of your septic tank, you should budget an extra $600 at the very least. The sort of material you choose will also have an impact on the price, with plastic being very inexpensive when compared to concrete. Furthermore, if you choose a more customized design over a stock model, you will be responsible for the additional work costs.

Tanks are easier to maintain and install in sandy, coarse soil, but tanks on clay soil are more problematic. As a result, the amount you pay will be determined by the location of your home as well as the soil type that surrounds your property.

FAQs About Septic Tank Systems

A septic system that has been poorly built can cause serious difficulties, such as water contamination and structural damage to your property. Repairs to a septic system are not inexpensive. Because of the high level of danger involved in constructing septic tanks, this process should be left to the professionals. Call around and talk about your requirements (as well as your budget) with a number of septic tank businesses in your region to find the ideal match.

What should I consider when installing a septic tank system?

A septic tank is an essential component of every property. Damage to your property as a result of structural failure or leaks may be costly, as well as dangerous to human and environmental health. It’s possible that the unpleasantness will even compel you to check into a motel for the night. Prior to establishing your septic tank system, take the following factors into consideration:

  • Soil type
  • Landscaping
  • Structural hazards (avoid places near cars or heavy machinery)
  • The size of the property
  • The size of the septic tank
  • Future maintenance
  • And the location of the tank

What other projects should I do at the same time?

Excavation is frequently required when installing a septic tank system (unless you opt for an above-ground tank). Once the excavators have broken ground, you may proceed with further subterranean projects that will save you time and money in the long run, such as:

  • Establish underground utilities and construct a retaining wall before beginning work on the sprinkler system.

How Much Does Septic Tank Cleaning Cost?

Medium: $75-$200; Running $300+ Fracturing the Soil: $1,000-$2,000+
  • According to Laundry-Alternative.com, the cost of dumping out a septic tank ranges from $75 to $200, but it may cost as much as $300 or more in some areas of the nation. It should be done every 1-3 years, depending on the size of the tank and the number of people that use it. Pumping out bigger tanks (between 1,500 and 2,500 gallons) might cost between $200 and $350. According to officials in Olympia, Washington, installing a high-quality filter to protect your leachfield/drainfield would cost around $200-$300 dollars. The proper pumping of the tank, cleaning of the drainfield lines, installation of filters, and a process known as fracturing the soil, which involves inserting a hollow tube into the ground and injecting a 300-pound blast of air, can sometimes bring a failing septic system back to life at a cost of $1,000 to $2,000 or more.

Related articles:Septic System,Sewer Line Replacement,Unclogging a Toilet What should be included:

  • One of the most important components of a septic system is a tank, which is connected to a soil absorption system (drainfield or leachfield). Heavy materials are allowed to drop to the bottom of the tank, where bacteria decomposes the solids into sludge, which is then disposed of. Scum is formed when grease and other light particles float on the surface of the water. Over time, a significant amount of sludge and scum accumulates. When they are pumping, they are prevented from running out of the tank and clogging the drainfield/leachfield. When it comes to septic systems, the Maryland Cooperative Extension presents a visually appealing explanation, while the Iowa Onsite Wastewater Program highlights the need of frequent tank pumping
  • Although biological additions are unlikely to be dangerous, certain chemical additives that are touted as removing the need for tank pumping may in fact cause damage to the septic system
  • Take note of this. According to Turtlesoft.com, pumping out a septic tank takes around 4-5 hours of physical effort or approximately 2 hours with a backhoe or other machinery. The process comprises locating the tank, excavating the access port (pumping should be done through the manhole, not the smaller inspection port), pumping out the tank (leaving nothing inside), checking for leaks, and finally backfilling and regrading the site. A septic tank should never be entered, as they are exceedingly unclean and may contain lethal gases. Many states mandate that septic tanks be pumped out only by specialists who have been trained and licensed to do so.
  • Others charge a set cost for identifying the septic tank and digging down to the access port, while others charge a rate based on the number of hours spent on the project. If you’re prepared to do the finding and digging yourself, you may be able to save some money, depending on how much time is needed. Consider drawing a map of the tank’s location in relation to the home or taking photographs while it is uncovered
  • This information may be useful for future pumping or other septic service needs
  • Check with your local health agency to see if they have a list of septic cleaning firms that are licensed and insured. Inquire about training and previous experience. Check to see if the firm is legally bonded, insured, and licensed in your jurisdiction. The National Onsite Wastewater Recycling Association can assist you with referrals to septic service merchants and suppliers.
CostHelper News What People Are Paying – Recent Comments Page 2 of 2-Previous12
Posted by:Robert E in Lancaster, PA. Posted:October 29th, 2020 11:10AM
Type:pump and inspection Company:John Kline

TWP requires inspection and pump every two years – two 500 gallon tanksused Klines for the last 3 services they are always on time and priced right good people to deal with

Posted by:ToptonMan in Mertztown, PA. Posted:April 3rd, 2020 09:04AM
Type:Septic Company:Clifford Hill
Posted by:GARY IRWIN in LITHFIELD PARK, AZ. Posted:September 28th, 2019 05:09PM
Type:SEPTIC Company:PARADISE SEPTIC

I had the lids uncovered and ready for them. I paid extra do to dirtgravel that had got in from a broken lid. I still need to get the rest of the gravelrock removed from the tank before I sell the house. Does anyone have any ideas to do this at a reasonable price?

Posted by:Justinedege in Fultonville, NY. Posted:August 27th, 2019 03:08PM
Type:Septic Company:Adirondack septic tank corp

500 gal tank, we dug down to the access port, had it ready to go, came to 253$. Their fee is for 1000 gal or less, if there’s more than 1000gal you’d have to pay to have them comeback or leave what was left

Posted by:Connie Brooks in Woodstock, GA. Posted:March 28th, 2019 06:03AM
Type: Company:Swat septic
Posted by:a user in Suffolk county, NY. Posted:March 19th, 2019 10:03AM
Type:Pumping only Company:Mr.Pump
Posted by:Chardon in Chardon, OH. Posted:January 24th, 2019 04:01PM
Type:Pump out Company:Judd

I wasn’t home when they did it so I do not know about digging anything up or anything. They said it was extremely full (it had been pumped about 2 years prior) and that it needs to be pumped every 2-3 years. Only 2 adults living there and part tine 2 kids

Posted by:ET in Camp Verde, AZ. Posted:January 14th, 2019 04:01PM
Type:Pumping out concrete septic tank Company:

Even with me digging out the access lid (which was a big hassle) everyone is still well over $350 in this part of the country. I think this website is whacked on the price range it provides.

Posted by:Paula C. in Navarre, FL. Posted:December 11th, 2018 06:12AM
Type: Company:JLG septic
Posted by:Billie J Moore in Huntsville, AL. Posted:October 25th, 2018 02:10PM
Type:Septic Company:Roto Rooter

I called to have the tank pumped after experiencing odors in the house. It had never been done since we moved in 10 years ago. Not sure if previous owners ever had it done. I was quoted a price of $300.00 plus the dumping fee. When Roto Rooter showed up and after he checked the location of the tank he informed me the cost was going to be $553.00. He never explained why the increase in cost. But I needed it done. After he completed the job he informed me the tank was in really good condition and it had been almost full.

We should have it emptied every 5-7 years (only 2 of us). Now the tank is empty but i still have the odor in the house! Can’t afford to call them out again to check

Posted by:a user in Leesburg Florida, FL. Posted:March 29th, 2018 06:03AM
Type:Pumping Company:

You need to change your scale that’s from like the 1970s and 80s $75-$200 it cost $100 just to get rid of the septic waste for the company how could a company do it for $75 and do the proper job raise your rates

Posted by:a user in chandarpur, Other. Posted:November 13th, 2017 05:11PM
Type:septic tank cleaning Company:
Posted by:Shar Olsten in Gilmer County, GA. Posted:October 25th, 2017 12:10AM
Type:Septic Company:Tows Septic

Had to do inspection and pump out of septic for the sale of house for new Buyes. This is so we could close. Tows Septic is the company we used and they reported that the water line was running across the septic tank underground. Reported after digging that there was a small leak on water line and that they repaired it. Less then a week later water line completely breaks and all water to house lost. No water at all to house to be able to be used. Never had a problem with water or pressure if water to house.

They broke the underground main water line when digging to locate septic for inspection and pump out.

Charging a bill of $1000 for the work.We are now in the middle of repairing the broken water pipe and are having company to come back out to repair the damage.

Posted by:in Woodstock, GA. Posted:September 6th, 2017 10:09AM
Type:Septic pumping Company:Superior Septic

Pump tank $489 Dig/locate $250 Filter $150 Excessive overflow $125 1500 pumped!

Posted by:a user in plantation, FL. Posted:May 11th, 2017 12:05PM
Type:pumping Company:jerry’ s septic
Posted by:Amine in Hackettstown, NJ. Posted:March 26th, 2017 08:03AM

We pumped both tanks and leach field over 1000 gallons for $900 water jet the leach field lines for 802 and another 275 for the truck to drain the water from the lines jetting. Not sure if this will solve the problem, but we are trying our best to avoid the cost of replacing it

Posted by:hsemedo Semedo andrews in Seekonk, MA. Posted:February 6th, 2017 04:02PM
Type:Septic Company:Devineson septic system

I couldn’t believe how prompted Michael was after I explained on the phone what the problem was i experiencing. He was very professional and friendly.

Posted by:Ken Meyer in Valdosta, GA. Posted:January 6th, 2017 10:01AM
Type:pumping and jetting lines Company:A 1 Septic Pumping

They did a great job both pumping and jetting. I would recommend them highly and will use them again. Not overpriced like most of the companies. They explained everything plainly.good people.

Posted by:Vince Dell in Hamburg, NY. Posted:December 6th, 2016 05:12PM
Type:Septic Company:Delo

I just purchased a home and the previous owner had no idea when the septic was last pumped, so it probably had gone 15-20 years without any maintenance. Home inspector said “just get it pumped and serviced so you know what you’ve got”.I called in Delo septic from Holland NY. Over the phone the owner walked me through the process. Since I had no idea where the septic was, he said the first task was to locate it. Delo out two trucks, one pump truck and one water jet / service truck to locate and snake any lines.

Very professional company, great to work with.

Posted by:tracy lawson in Dowagiac, MI. Posted:October 21st, 2016 04:10AM
Type:3000 gal tank Company:Turner septic

Idk husband is freakin out said we paid to much.but we had a bigger tank then we thought we were quoted for a 1500 ($225)and a 2500 ($325)gal tank turned out to be 3000 gal tank.

Posted by:Sherry1967 in Sacramento, CA. Posted:March 4th, 2016 07:03PM
Type:1500g septic Company:Reliable Septic

Showed up on time. Did the job for what they said they would.

Posted by:a user in Hendersonville, NC. Posted:January 9th, 2016 05:01AM

My question is are they suppose remove all the debree?

Posted by:Bakah in Hopewell junction, NY. Posted:September 8th, 2015 05:09AM
Type:Cement tank Company:Hopewell septic

Quoted 265. To pump out tank by Hopewell Septic pumping. When job completed said he had to spend extra time to clean out tank and charged me extra 150.00. Being a nice guy I said ok. When my son heard about the price increase he had a fit, he said the guy took advantage of me because I was an old man. The most I should have paid was for a1250 tank as that is what I had. I should have only paid the price quoted to pump out tank. Was never told it would cost more to clean out the the 4 inches of crud in bottom of tank.

Posted by:Jerry123 in Plymouth, CT. Posted:August 12th, 2015 08:08PM
Type:Septic Company:

1250 gallon Septic tank pumped out. Guy had to dig up one access cover because I wasn’t aware there were 2. Hadn’t been cleaned out in almost 3 yrs. Page 2 of 2-Previous12 External Resources: More Articles on the Subject of the Home and Garden

Check Out All Costs for Home and Garden How Much Does a Propane Tank Cost? How Much Does a Plumber Cost? How Much Does Pressure Washing Cost?
CostHelper is based in Silicon Valley and provides consumers with unbiased price information about thousands of goods and services. Our writers are experienced journalists who adhere to our stricteditorial ethics policy.

Leave a Comment

Your email address will not be published. Required fields are marked *