- Typical septic tank riser diameter is 24-inches but 30-inch, 16-inch and other riser diameters are available. Risers are sold in varying heights from 6″ and up. Watch out: Occasionally, as you’ll see in photos here, septic tank risers are made of other materials such as stacked concrete blocks or even wood.
How high should septic risers be?
Determine Riser Height. Tank risers are typically installed about 3 inches above grade. Having the lid above grade will make it easy to find, however, some people will choose to have the lid just a couple of inches below grade so that is easier to mow over and less visible.
Should septic tank riser be above ground?
Landscaping Around Septic Tank Risers However, septic tank risers should never be buried. Instead, they should be 2 inches above final grade to prevent groundwater from entering the system.
Are septic tank risers safe?
Fortunately, lids and risers in today’s onsite market can help prevent these unfortunate incidents. These innovative products ensure septic tank covers are secure and prohibit unauthorized tank access.
How much weight can a septic tank riser lid hold?
The 24-inch solid fiberglass DuraFiber riser lid from Orenco Systems has a flat-style lip for PVC and HDPE pipe. It weighs 10 pounds, but resists damage from lawn equipment and can withstand a 20,000-pound load.
Can you cover septic tank lids?
If you have a traditional septic system, the tank should be pumped every 3-5 years. That means that the septic lids should be accessible every 3-5 years. You can use almost any temporary, movable objects to cover your lids, like: Mulch (but not landscaping)
How do you hide a septic tank riser?
The easiest way to hide your septic riser is by simply placing something over it, such as a hollow, lightweight landscape rock, a birdbath, a sundial or a decorative lawn ornament. Apply basic landscaping principles when deciding what to use.
Do they make square risers for septic tanks?
The Polylok square riser adapter ring is designed to connect the Polylok septic tank risers or lids to an existing concrete tank with large square or round openings.
Can you pump septic up hill?
If you want to install a bathroom in a house and the pitch of the house runs the wrong direction, you can always install a sewage ejector by the bathroom and pump the sewage uphill. The distance the water will travel determines the horsepower of the pump.
Can a leach field be on a hill?
Septic drainfields that treat and dispose of clarified wastewater effluent using gravity need to be properly pitched and never sloped too steeply. Otherwise effluent will run too quickly to the low end of the drainfield line and gravel trench where it is likely to simply break out to the property surface.
Can a leach field go uphill?
The tank will not drain uphill to the drain field. The leach lines themselves, however, should be set level. In a conventional gravity system, the pipe from the house to the septic tank, and the outlet pipe from the tank to the distribution box or leach field, should both slope downward with a minimum slope of 1/4 in.
What You Should Know About Septic Tank Risers
Septic tank risers are an important part of any septic system, and they should be installed in every property. This article will provide you an overview of septic tank risers and how they may help your septic system. What Is the Function of a Septic Tank Riser? A septic tank riser is a conduit that connects your home’s surface drainage system to your septic tank beneath the ground level. An access port or the pump-out ports on the septic tank are where the riser connects to the tank. Septic tank risers are equipped with lids that can be quickly removed to allow you to check or pump your septic tank without having to dig up your yard.
These structures are often made of materials that disintegrate slowly over time, such as plastic or concrete.
What Are the Advantages of Using Risers?
Normally, this entails digging up your yard before the pump is installed and reburying the tank once it has been installed.
- The use of a septic tank riser can help to minimize the amount of time spent pumping your septic tank.
- The fact that the riser is visible above the surface of your yard makes it an ideal signal for locating your septic tank the first time you need to discover one in your yard.
- For those who want to stay in their house for several years, septic tank risers are not only handy, but they are also cost-effective.
- Concrete risers are more durable, but they are also more expensive, and the price will be determined by the quote you receive from the contractor who will be installing them.
- Because labor expenses account for a large amount of the fees that contractors charge for septic system inspection and pumping, installing a riser may possibly reduce the future cost of septic service by as much as 50 percent.
- Each and every property can profit from the installation of a septic tank riser, but this does not imply that you should do so immediately.
- This allows for the installation of the pump and riser to be completed in a single step.
- Because a riser should be considered a long-term investment, you should be certain that your tank is in good functioning shape before installing one.
- A septic tank riser is a straightforward concept that may save you a significant amount of money and pain when it comes to septic system maintenance and repair.
We look forward to hearing from you and addressing any concerns you may have concerning your septic system requirements. Contact us now. Please let us know how we may be of assistance to you and your septic system right now!
Septic Tanks Risers- Bring Your Access To Ground Level
Getting a little tired of having to dig up your yard every time your septic tank has to be pumped out or serviced? Are you getting tired of dealing with incredibly hefty concrete lids? It appears that you are in need of septic tank risers in order to bring your access down to ground level! Our septic tank risers and covers are constructed of high-quality, heavy-duty polyethylene plastic, which makes them extremely sturdy and durable while also being lightweight and simple to handle.
THE POLYLOK ADVANTAGE
Septic tank risers are available in a variety of shapes, sizes, and designs on the current market. We believe our Polylok septic tank risers are the best money can buy in terms of quality. There are several causes for this, but the following are the most significant:
FACTORY INSTALLED GASKETS
The Polylok brand is the only one on the market that is sent to you from the factory with gaskets already in place, making it unique. This means that there is no further work necessary to ensure that the riser system is air and water tight! Keep ground water out of your tank, wastewater in your tank, and potentially hazardous gases out of your yard! In contrast to most other products, our Polylok septic tank risers do not require you to purchase or use any other type of sealant between each riser part.
INTERNAL STRUCTURAL RIBS
Once the hole has been backfilled, the structural ribs in the Polylok septic tank risers are inserted inside around each riser piece, providing them with tremendous strength and allowing them to maintain their shape under the pressure of the earth being pressed on them. As a result of the freezing and thawing of the ground in many parts of the country, it is necessary to have a smooth surface on the outside of the riser’s exterior. It is possible for items that have structural support on the outside of the riser to actually be lifted from the tank, causing damage to both the riser and seal, during periods of freezing and thawing.
LIDS WITH HANDLES
The access lid on a riser system is one of the most significant components since it is the part of the system that is visible from the outside and that must be removed every time the system is pumped or otherwise maintained. The Polylok lids are pre-installed with handles, which make it simple to remove the lid whenever you need to get access to the system or to replace it. The bottom of the lids is structurally supported, which allows them to remain relatively flat rather than domed in shape, as is the case with many other items on the market.
LARGE ADAPTER RING
The access lid on a riser system is one of the most significant components since it is the part of the system that is visible from the outside and that must be removed every time the system is pumped or repaired. Handles are pre-installed on the Polylok lids, which make it simple to remove the lid whenever you need to get access to your system.
It is also possible for the lids to be relatively flat rather than domed shaped like many other goods on the market since they are structurally supported on the bottom.
GET OUT YOUR MEASURING STICK!
A few measures must be taken before purchasing a septic tank riser system in order to ensure proper installation. The first thing to consider is the size of your opening. Take a measurement of the aperture in your septic tank at its widest point to determine the size of your tank. Instead than measuring the present lid, it’s critical to measure the opening. Because you will be removing the present cover, the measurements of the lid are no longer important and may differ from the size of the aperture itself.
You are now prepared to make a purchase based on these two measures!
THE COMPLETE RISER SYSTEM
The following are the measurements that must be taken when acquiring or installing a new septic tank riser system: The first thing to consider is the size of your doorway or window opening. To find out how big your septic tank is, measure the entrance at its widest point. Instead than measuring the present lid, it’s crucial to measure the opening. Because you will be removing the present cover, the measurements of the lid are no longer important and may differ from the dimensions of the aperture itself.
You are now prepared to make a purchase based on these two dimensions.
The adapter ring is the first component that you’ll need to put together in order to assemble a full riser system. The adapter ring attaches directly to the septic tank, allowing the risers to stack, lock, and mount to it without the need for any additional hardware. Having this component is critical since the risers are not flat on the bottom because they are meant to be stackable, and it is not feasible to install them straight to the septic tank without this piece. The adapter ring provides the flat surface you need to mount to the tank while also being able to accommodate the stackable risers that are included with the tank.
Our square tank adapter ring can accommodate big square apertures up to 25 inches in diameter and large round openings up to 27 inches in diameter.
They are intended to be used with openings that are 24″ or less in diameter.
Concrete anchors, a masonry bit for installing the anchors, and butyl sealer are all included in this set.
Following your selection of the adapter ring, it is time to go shopping for risers. The Polylok risers are available in two heights: 6″ and 12″, as well as in two diameters: 24″ and 20″.
Stackable, each unit has a gasket that has been fitted as well as stainless steel screws to allow for easy installation. Determine which risers will work best for your application based on the height measurement you made between the septic tank and ground level.
OPTIONAL SAFETY SCREEN
In addition to the 20″ and 24″ riser systems, Polylok also produces safety screens that fit within the riser systems. These screens serve as a supplementary layer of protection in the event that the riser cover is unintentionally damaged or removed, and they keep foreign objects from entering the septic tank. They also keep dogs from slipping into unprotected septic tank openings!
You will require a lid to complete your riser system, which is the final component you will require. Both the 20″ and 24″ riser systems may be used with the Polylok lids, which are available in two different types to suit your needs. For ease of access, the basic lid is equipped with handles and a gasket that has been factory placed, as well as stainless steel screws to keep it in place. These lids are strong enough to withstand foot traffic as well as the weight of a riding lawn mower driving across them.
- Stainless steel screws are included for installation.
- Installations below grade or in regions with a high volume of foot traffic are advised for the heavy-duty lids.
- The shipping of these items in large boxes necessitates the addition of additional time, materials, and UPS shipping fees.
- If you place your order before 2 PM CST, you will be able to get your order sent the same day you placed it.
FREQUENTLY ASKED QUESTIONS
You will require a lid to complete your riser system, which is the last component. Both the 20″ and 24″ riser systems may be used with the Polylok lids, which are available in two different types to match your needs. For ease of access, the basic lid is equipped with handles and a gasket that has been factory placed, as well as stainless steel screws to secure it in position. A riding lawn mower may be driven on these lids without causing damage. They can also withstand foot usage. Heavy Duty lids are the second type of lid we provide.
They are also available in a variety of colors.
These goods may all be purchased from the following websites: NOTICE: FREE SHIPPING IS NOT AVAILABLE ON ORDERS FOR SEPTIC TANK RISERS AND LID.
SIMPLY ADD THE ITEMS TO YOUR SHOPPING CART TO RECEIVE THE SHIPPING COSTS. If you place your order before 2 PM CST, you will be able to get your order the next day.
WILL THE LID FIT DIRECTLY ON THE ADAPTER RING OR DO I NEED TO USE A RISER?
With the exception of the 24″ Heavy Duty Lid, the lid will often fit straight onto the adapter rings in the majority of cases. The underside of the 24″ Heavy Duty Lid is strengthened for added strength. The height of this reinforcement is actually more than the height of the adapter ring. Therefore, the 24″ Heavy Duty Lid will only be able to be used without using an adapter when the opening is at least 24″ in diameter. The lid will not fit through any aperture less than 24 inches in diameter.
CAN I CUT THE RISER SYSTEM DOWN TO A SPECIFIC HEIGHT?
No, the Polylok riser system is available in increments of 6″ and 12″, and it cannot be customized to a certain height. Cutting the riser will result in the lid not being adequately secured on the riser that has been cut down.
DO I BRING THE RISER SYSTEM JUST BELOW, AT, OR ABOVE GRADE?
It is entirely up to you whether you want to bring the riser system up to grade, raise it above grade, or leave it slightly below grade. Because the riser system is airtight and watertight, there is no danger in moving it up to or above grade level.
SHOULD I USE THE STANDARD OR THE HEAVY DUTY LID?
The regular lid is sturdy enough to withstand foot activity and weights up to the weight of a small riding lawn mower passing over it without bending or breaking. If the riser system is located in a high traffic location or is going to be run over by lawn equipment on a frequent basis, the heavy duty lid is recommended. If you have any more queries, please contact us at 1-877-925-5132 or [email protected].
Installing Access Risers
In order to perform fundamental septic system maintenance, you must first evaluate the condition of your septic tank and pump chamber (if you have one), which can be time-consuming and labor-intensive if you do not have access ports known as risers. Consider the prospect of having to dig through two feet of dirt to check the oil on your vehicle. Installing septic tank risers for an off-site septic system is broken down into four steps, which are outlined below. Please keep in mind that the currentWashington State Coderequiresrisers for all septic systems, which means you may be forced to install one if you are asking for a construction permit, land division, or any other type of official action in the state.
A few safety tips before you get started:
- Struck by an underground electrical wire while excavating may be quite dangerous! If you are in any way doubtful about the presence of subterranean lines on your property, you can have them found by contacting 1-800-424-5555 or 811, or by visiting the website
- Use the buddy system to your advantage! Working with a partner is usually recommended since the fumes connected with open sewage can be dangerous and cause a person to go unconscious. Never leave a septic tank that is open unattended! Once the lids have been removed, exercise caution around the tank and keep dogs and children at a safe distance. Examine the structural integrity of your septic tank! If a septic tank is more than 20 years old, it is recommended that it be pumped to ensure that the tank’s structural integrity and water-tightness are not compromised. Instead of spending money on costly repairs, it is preferable to replace the tank with a contemporary septic tank that includes risers as part of the installation. A permit from your local Environmental Health department is required for the replacement of a septic tank.
Gather all the MaterialsTools You will Need
It should be possible to get most of the components required to construct a septic tank riser at your local plumbing hardware store or on the internet. PVC risers are available in a variety of shapes and sizes. Some of the brand names you might be familiar with include “Tuf-Tite,” “Polylok,” and “Orenco.” Risers are typically 24 inches in diameter and may be readily inserted into the tank hole opening without difficulty. Due to the fact that certain tanks have square openings, it might be difficult to fit a riser around the square entrance.
Some types of risers are made to order based on the height you want, while others are available in increments of 6-12 inches.
Then purchase an Adapter and Risers that are somewhat bigger in diameter than the hole.
See below for Step 4 on attaching risers to the tank entrance. For the purpose of installing a riser system on your septic tank, you will require the following components:
- Tank Adapter Ring (TAR)
- Riser Adapter Ring Kit
- Butyl Rope
- Domed Lid OR Flat Lid
- Stainless Steel Screws
The following materials will be required for digging up your septic tank(s):
- As-built condition of the sewage treatment system The following items are required: sketch on paper, measuring tape, shovel, probing instrument, eye protection, and work gloves.
To cut risers to the proper size, the following tools are required:
- Circular saws, saber/jig saws, and hand saws
- Raspor file
- Marking pen
- Tape measure
- Drill with a 1/4″ bit
Circular saws, saber/jig saws, and hand saws are all available. Raspor file; Marking pen; Tape measure; Drill with a 1/4-inch bit
- High-strength concrete patch mix
- A small bucket
- A mixing stick
- And gloves
Follow the four simple procedures shown below to install access risers on your septic components, or download and print a copy of theSeptic Tank Manhole and Access Riser Installationbrochure from Thurston County Environmental Health to get started right now.
Step 1: LocateYour Septic Tank(s)
When looking for your underground septic tank or tanks, it is essential to consult the ‘As-built’ Record Drawing linked with your septic system for assistance. Essentially, this is a plot diagram that shows where your septic system was put on your property, as well as distances between septic components and notable landmarks. The Online Permit System will guide you through the process of locating septic-related documentation if you do not have a “as-built” document. It is possible that you may need to contact Environmental Health to examine the paper records or seek a specialist to find your tank if an as-built is not accessible.
Probing the area around the septic tank with the probing instrument until you contact concrete should be done lightly.
The presence of underground electricity or other utility lines and cables might put your septic tank in danger.
Call 1-800-424-5555 or 811 or go online to make sure that any electrical utilities are found before you begin digging before you begin digging.
Step 2: Uncover Your Septic Tank (s)
Once you’ve discovered your septic tank, you may start digging about. The tank is typically 6 feet wide by 8 feet long, with the width being the largest size. Remove all of the pebbles and debris from around the tank’s lid openings and dig out the whole top of the tank. You will want to clean out any dirt that has accumulated on the surface of your septic tank. This will assist you in ensuring that you generate a high-quality seal. You should have two openings: one over the inlet (which comes from the home) and another over the outlet (which comes from the yard) (into the drainfield or pump chamber).
- You’ll need a riser for each of the doors you open.
- Typically, the inlet side is the one that is nearest to the home.
- When cleaning the tank, it is beneficial to remove the complete top of the tank.
- Risers must be modified in order to be correctly installed, and all manholes (holes 24 inches or bigger in diameter or square in shape) must also be updated, as well as the tankinlet and outlet baffle covers (if separate from the manholes).
- If you discover one – and only one – riser already installed, it is most likely for the pump chamber, which only requires a single riser to provide access to the pump to function properly.
- Remove the concrete lids so that they may be disposed when the project is completed.
- Consult your’As-built’Recorddrawing to establish whether you have a distribution box (D-box), which you will also need to unearth and place a riser on if you have a typical gravity system.
- Once the lids have been removed, proceed with caution around the tank.
- Inform someone of your whereabouts in case you are involved in an accident.
You should be aware that exposure to sewage can result in serious sickness, so make sure you wear gloves and thoroughly wash your hands afterward with soap and water. It is also recommended that you wear eye protection in the event that debris falls into a tank and splashes back at you.
Step 3: Fit Risers to Component Openings
In accordance with the diameter of the septic tank manholes, huge risers will either sit on top of the septic tank or will fit down into the aperture of the tank by 1-3 inches. It’s important to keep this in mind while calculating the height of the riser. The surplus can be easily removed; nevertheless, it is difficult to add a few inches to the length. Take the following measurements of the manhole cover’s diameter:
- Theriser will fit into the tank hole if the aperture is between 26 and 29 inches in diameter. Measure the distance from the ground to the top of the septic tank and multiply the measurement by three inches. The following is required if the aperture is greater than 29 inches: a 3-foot square fiberglass plate (with a 22-inch hole in the middle) is required. In this case, it lies above the manhole and narrows the aperture, allowing a 24-inch riser to be utilized instead of a more expensive 30-inch riser, saving money.
The distance between the ground and the top of the fiberglass plate should be measured. You may choose to place the risers so that they are level with the surface of the ground, or you may want them to stand out a few inches above the ground (if a riser is above ground make sure you are careful when mowing). Tips: To shorten a big riser with ribs, drill a 1/4-inch hole between the ribs above the cut line and finish the cut by following one of the grooves between the ribs with a saber/jig saw to finish the cut.
By eliminating one of the ribs from the largeriser, it may be made to fit more snugly into a smaller manhole entrance.
Step 4: Attach Risers toSeptic Tank (s)
The distance between the ground and the top of the fiberglass plate should be measured. [source: wikipedia] The risers may be flat with the ground surface, or they may protrude a few inches above the ground surface, depending on your preference (if a riser is above ground make sure you are careful when mowing). Tips: To shorten a big riser with ribs, drill a 1/4-inch hole between the ribs above the cut line and finish the cut by following one of the grooves between the ribs with a saber/jig saw to complete the cut.
By removing one of the ribs from the largeriser, it may be made to fit snuggly into a smaller manhole.
The benefits of septic tank risers
Installing septic tank access risers will save you money as well as your back. Accessing the septic tank is made simple by the use of rippers. | Photo courtesy of the Michigan State University College of Agriculture and Natural Resources The process of finding and pulling up the lid to your septic tank may be time-consuming and frustrating. In many cases, homeowners aren’t even sure where to begin their search for the lid to their septic tank. Some people are just unable to pull themselves out of a hole.
- What method do individuals use to locate the buried treasure that is their septic tank lid?
- Others look for a clue, such as a dead spot of grass or other visual signals, to help them find their way.
- Whatever way you choose, digging it out is still necessary, and if the correct location cannot be discovered, another hole must be excavated.
- Some counties, such as Kalamazoo, Oakland, and Otsego, mandate that septic tank access risers be erected; these are just a few examples.
- Contact your Michigan County to find out about the most recent onsite waste water rules that apply to you.
- A septic tank riser is a pipe that can be built of plastic, fiberglass, or concrete to carry waste away from the tank.
- The lid is then either left uncovered or covered with a very thin layer of soil and grass, depending on the preference of the gardener.
It goes without saying that any modifications to your septic tank or system will need to be approved by your county environmental health department or another qualified inspector.
You may arrange the installation of a riser in your septic system to coincide with your usual septic system maintenance schedule.
It is also possible that having a riser in place will dramatically lower the overall cost of septic tank maintenance over time, owing to the increased ease of access and reduced time spent on the operation.
MSU Extension Educator Beth Clawson can provide further information on the onsite waste water systems you may be interested in.
The Michigan Department of Natural Resources has a team of natural resources educators working to provide aquatic invasive species instructional programming and support throughout the state.
You can reach out to an educator using MSU Extension’s ” Find an Expert ” search engine by searching for “Natural Resources Water Quality” in the keywords field. Resources:
Did you find this article to be informative?
You Might Also Be Interested In
Most homeowners consider their septic system to be a “out of sight, out of mind” service that receives little or no attention unless there is a problem. Septic systems are buried underground, and if you aren’t sure where your tank and its components are, it might be tough to discover your access ports or manhole covers if you aren’t familiar with your property’s layout. Septic tank risers are a straightforward, cost-effective solution to this problem that can result in significant long-term savings.
- What is a septic tank riser and how does it work?
- Risers, sometimes known as “extensions,” are available in a variety of heights to raise any access port up to grade.
- Because the riser extends from your tank entrance to the lawn surface, it makes it much easier to reach your septic tank for pumping, maintenance, and inspections than it would otherwise be.
- Digging down to your septic tank lid or access port and fitting the riser to the entrance are the steps involved in installation.
- Then we’ll fill the area around the pipe with earth and put the lid on top of it once it’s in place.
- The AdvantagesWhen it comes to septic tank risers, there are a plethora of advantages to consider.
- The expense of installing a riser is one-time, but the advantages are long-lasting. The cost of the extension will be covered after it is completed, and your tank will be easier to access for pumping, maintenance, and inspections. Never again will you have to look for your access ports! When we put your manhole cover up to grade, it will be clearly visible at all times
- There will be no more digging! This is especially useful during the winter months, when digging out a buried manhole cover might take several hours and need specialized equipment. This is in addition to the mess that it can create in your yard if the lid is buried several feet down
- Nonetheless, it saves you money. Time is money, after all! Furthermore, since it is simpler to reach your septic tank, our staff can complete your task or resolve your problem much more quickly
- It is critical to understand where everything is located. If you’re putting up a new patio, house addition, or backyard project, understanding where your tank and its components are located will be quite beneficial to your project. We’ll even draw you a schematic if you need one
- Just let us know.
Are you ready to talk to us about septic risers and how they can make your next septic pumping job a whole lot easier? For a $20 discount, call 717-898-2333 and mention this article. We provide service to homes and businesses across Central Pennsylvania, and if you know your tank is due for a pumping, we can install your risers at the same time that your tank is being serviced.
Septic Tank Risers and Covers
Risers and covers for septic tanks are available on this page. Risers and covers for septic tanks Septic Services by Advanced Septic Services 2017-10-09T19:55:27+00:00
Installation and Benefits of Septic Tank Risers and Covers
Were you becoming a little tired of having to dig up the yard every time your septic tank needed to be serviced or pumped? We’ve come up with a solution! Clermont homes will benefit from the installation of septic tank risers and covers, which will make the procedure smoother and faster – and may even save you money in the long run.
The information and video provided below will assist you in better understanding how these septic tank risers and covers are placed, as well as the advantages of utilizing them.
What are Septic Tank Risers?
Are you weary of digging up your yard every time your septic tank has to be maintained or pumped? Our team has devised an answer. Clermont homes will benefit from the installation of septic tank risers and covers, which will make the procedure smoother and faster – and may even result in a savings over time. The information and video provided below will assist you in better understanding how these septic tank risers and covers are placed, as well as the advantages of employing them in your septic system.
Installation of the Septic Tank Risers and Covers
There are three parts to installing the septic tank riser and cover, which may be broken down to make the procedure easier to grasp. Keep in mind that after the riser is put, you will not have to go through this operation again for the duration of the tank’s life. The following is the procedure that was followed in order to install the tank extension:
Step 1 – Choosing the Riser Material
In order to have the septic tank riser erected, you will have the option of selecting from a variety of various materials that will be utilized in its construction. The three most prevalent options are polyvinyl chloride (PVC), polyethylene, and concrete, each of which has its own advantages and disadvantages in terms of durability, simplicity of installation, and cost. Concrete is the least expensive of the building materials, but it is also the most difficult to install due to the greater labor requirements.
PVC septic tanks are a bit more expensive, but they are the lightest and easiest to install, and they are less prone to leak water or gasses throughout the course of the tank’s life, making them a top choice.
Step 2 – Where to Install Septic Risers
The septic tank riser makes it easier to get to the tank’s lid when it is full. Bringing the tank closer to the ground surface necessitates careful consideration of whether or not you want the cap on the riser to be visible or whether you want it to be just slightly below the surface of the grass. In most cases, an above-ground septic tank riser installation is employed in regions that are not visible or areas that do not interfere with lawn maintenance. The construction of a below-ground septic tank riser will essentially conceal the riser, which will be slightly below the surface.
Step 3 – Determining Riser Height
When constructed 3 feet below the surface, a septic tank is considered to be effective; however, the typical depth is roughly 18 inches. A number of riggers can be piled on top of each other until they reach just below the surface of the water.
Determining whether or not you want the cap above or below the surface allows you to make the appropriate measurements and materials choices before you begin working on the riser installation itself. The process is now complete after the tank riser has been halted and the terminus has been capped.
Benefits of Using Septic Tank Risers
Numerous advantages may be gained by having a skilled Clermont FL septic business install your septic tank risers and covers, including the following. If you have any further questions or concerns that have not been addressed here, you should speak with a member of the installation crew who will be able to elaborate on these benefits. Keep in mind that the cost of having the septic tank risers and covers installed is a one-time expense. Septic Tank Riser Installation The cost of the inspection and maintenance will be recouped by the savings on subsequent inspections and maintenance.
- Savings over a long period of time will accumulate significantly.
- Visual Assessment Made Simple:Risers and covers also make it simple for homeowners to undertake a fast visual inspection of their tanks to identify whether or not they are full.
- By simply lifting the septic tank cover, you will be able to view inside the tank and determine whether you need to hire a plumber or a septic pumping company like Advanced Septic Services to pump out the tank.
- Whenever the lid is only a few inches below the level of the lawn, a little patch of grass over it will quickly conceal both the riser and cap.
- You should now be aware of all of the advantages as well as the procedure for installing septic tank risers and covers.
- Professional septic specialists will no longer be required to look for the septic tank by digging multiple holes in your yard in order to discover it.
Do I Really Need A Septic Tank Riser In My Central Florida Home?
04/03/2017 Know where the lid of your septic tank is placed on your property. Due to the fact that septic tanks in Orlando are located underground, it might be difficult to locate the lid to the tank. Makes septic tank pumping and inspection more difficult and expensive! There is a simple solution to this problem! For long-term savings, installing a septic tank riser is a highly affordable and efficient method of waste disposal. A septic tank riser is often composed of plastic or concrete to protect the tank from damage.
- They are attached to the top of the septic tank or pump out opening and run vertically down to the ground level to collect the wastewater.
- The riser makes it possible to reach the septic tank more easily for maintenance and pumping, as well as to conduct a more thorough examination.
- Are you tired of paying for the expensive labor costs associated with looking for and digging up the septic tank cover that you don’t believe exists?
- It will soon pay for itself in the long run by saving money on maintenance, pumping, and inspections, to name a few things.
- It can also be installed just below the surface of the earth, allowing the grass to be maintained as usual.
- If you can’t recall the last time you had your septic tank drained, it’s likely that it’s been much too long since then.
Usually, if you’re having troubles with your septic system, delaying will just make the situation more worse. Don’t hesitate to call Orlando Septic Services if you need help with a home or business project. We are here to assist you with any and all of your trash management requirements!
The Importance of Septic Tank Risers
A septic tank riser system is an extremely beneficial addition to your septic system and is highly suggested by experts. Theseptic tank riserwill make the process of maintaining and monitoring your septic system significantly easier and more convenient.
Septic Tank Risers will Lower Your Septic System Cost
On any new or updated septic system in the United States, authorized septic tank risers are required to be built by law in most states. This obligation, in contrast to many other legislative regulations, really provides advantages. Your septic system is one of the most expensive mechanical elements on your property. It is also one of the most complicated. It is also one of the least watched and least understood systems that you have in your possession, as well. If you don’t have septic tank risers, your system will be “out of sight and out of mind” for a long time.
The average cost of a septic system in the United States is around $15,000.
If you add the interest costs to the $15,000 and divide the total sum by the length of time the system will live, your septic system will cost you more than $1,000 a year to maintain.
The installation of septic tank risers is the most effective method of monitoring your septic system.
Advantages of Septic Tank Risers
Septic Tank Riser Made of Concrete The first advantage of an aseptic tank riser is that it is aesthetically pleasing. Every time you see the riser cover, it will serve as a constant reminder that you have a septic tank. This will help you to remember this truth on a frequent basis. Due to the unattractiveness of the old-style concrete covers, many individuals are uncomfortable with the idea of their septic tank risers being visible in their yard. Modern septic tank risers and covers are significantly more aesthetically pleasing, blend in with the surrounding environment, and are easier to install than previous models.
The concrete coverings are similarly heavy, weighing between 60 and 80 pounds.
Riser rings for septic tanks made of modern polymers are generally less than 30 pounds in weight.
Modern Septic Tank Risers Seal Surface Water
Septic Tank Riser of the 21st Century The fact that they are more easier to seal than older models means that they are better at keeping surface water from entering the tank. Old-fashioned concrete riser rings do not have a gasket included into them. As a result, surface water may readily flow between the connection between the tank and the riser ring, as well as between the lid and the riser ring, when the tank is filled with water. Nowadays, a watertight seal is installed between the septic tank and the base flange of the riser.
To keep little children from curiously messing with the cover and putting themselves in danger of falling into the septic tank, modern riser covers are fastened with threaded fasteners.
How to Inspect Your Septic Tank
On average, we recommend that you examine your septic tank visually once every six months. Simply removing the septic tank riser cover will allow you to do the check. Remove the cover from the tank and measure the height of the water level in the tank. The water level is typically 6″ to 8″ below the inside of the tank cover when the tank is full. The amount of air space above the water should be between 6″ and 8″ according to this rule. Because of how the clean-out cover is installed on your tank, you may be able to view the septic tank’s inlet or outflow baffle depending on the placement of the cover.
According to the outlet baffle (which should be closest to the drainfield), typical water level should be even with the bottom of pipe or no more than 14 inches deep in the pipe.
Other Benefits of Septic Tank Risers
Another advantage of installing a septic tank riser is that it will make the installation of an Aero-Stream Remediation System very simple. Take off the riser cover and lower the diffuser assembly and bio-brush into the tank. Then drill a 5/8″ hole through the plastic septic tank riser about 2-3″ below the surface of the water to allow for drainage. Connect the airline to the Aero-Stream aerobic generating unit by pushing it through the hole that has been bored. Done. Simple, Quick, and Efficient!
See How Simple it it to install our Septic Tank Riser
In the event that your septic alarm goes off, it may surely create some anxiety and uncertainty; and if you happen to be experiencing this right now, then you’ve arrived to the correct location! Don’t be concerned; it does not necessitate urgent action. Instead, take your time to go through this full essay so that you will be prepared to act now or in the future if the situation arises. What Septic Systems Are and How They Work The alarm works in conjunction with the septic system to alert you when the water level within the pump tank has increased to an unsafe level or has decreased to an unsafe level.
The timer is in charge of regulating the time intervals during which the pump is permitted to pump wastewater into the drainage system.
Thus, during periods of excessive water use, the drain field is kept from getting overflowing, which might cause damage to the drainage system.
A large amount of water is injected into the system in between pumping cycles for whatever cause, and the water has nowhere else to go but back into the system’s pump tank.
Depending on how much water was and continues to be put into the system and how the pump is set up to operate on a timer, it may take many pumping cycles until the water levels are returned to normal. Causes of the alarm going off in the first place
- There is an excessive amount of water being put into the septic system. This is the result of excessive water use, which might be caused by multiple loads of laundry, an excessive quantity of dishwashing, or a disproportionate number of long showers.
- Somehow, groundwater is making its way into the system. If there is an excessive amount of standing water surrounding the septic tanks, whether generated by rain or another source, the water may seep into the tanks and cause the internal water level to rise.
- It’s possible that one of the components of the septic system is malfunctioning. If anything goes wrong with your system — including the pump and floats — the alarm and timer will go off and the septic system will stop working correctly.
An issue with one of the components of the septic system might be present, for example. Anything, including the pump, floats, alarm, and timer, might be defective, causing the septic system to malfunction and fail to function correctly.
What Is a Septic Tank Riser?
If you have an older septic system, you may be wondering what a septic tank riser is and why you would need one. Traditional systems were designed to be out of sight, out of mind; they were buried for 15-20 years with no consideration given until they required emergency pumping or repair. Newer septic systems now have risers, which are a positive thing, since they provide a more efficient way of draining the tank. Septic tank risers provide simple access to your septic tank from the ground level as well as increased view into the operation of your septic system.
The Benefits of a Septic Tank Riser
Before we go into the advantages, it’s important to understand what a septic tank riser is. Riser are often built of plastic or concrete, depending on the use. They are enormous circular pipes that are installed above the cleanout entrance of the septic tank and are long enough to extend the cleanout opening all the way to the ground level. The advantages are as follows:
- Even when the ground is frozen, it is possible to get access during the winter months. Maintenance and pumping of the septic system may be done quickly and easily. Septic system repair should not need digging up your yard. A visual reminder of the importance of your septic system
The last advantage may appear to be somewhat counter-intuitive. What are the benefits of having a visual reminder of your septic system? Preventing premature septic system collapse is possible through periodic septic system maintenance. With a septic tank riser, you’ll not only be able to identify the position of your septic system, but you’ll also have a visual reminder to have your system pumped at least once every two to three years as well. However, the septic tank risers that we install are intended to fit in with the surrounding environment.
How Much a Septic Tank Riser Costs
In your house, your septic system is one of the most vital mechanical systems to have working properly. A septic tank riser, which costs only a one-time installation price, can safeguard your septic system for many years to come. The ease with which maintenance and pumping may be performed will almost instantly result in a return on your investment. You may also say goodbye to costly and unsightly excavations when it comes to upkeep. Although the ground may be frozen in winter, you will be able to inspect your septic system visually even during the coldest months of the year.
This will result in costly emergency repairs.
If you would like to learn more about how septic tank risers might assist you, please contact us at 800-595-7907.
Traditional systems were designed to be out of sight, out of mind; they were buried for 15-20 years with no consideration given until they required emergency pumping or repair.
Newer septic systems now have risers, which are a positive thing, since they provide a more efficient way of draining the tank. Septic tank risers provide simple access to your septic tank from the ground level as well as increased view into the operation of your septic system.
What are the benefits of a septic tank riser?
Before we go into the advantages, it’s important to understand what a septic tank riser is. Riser are often built of plastic or concrete, depending on the use. They are enormous circular pipes that are installed above the cleanout entrance of the septic tank and are long enough to extend the cleanout opening all the way to the ground level. The advantages are as follows:
- Even when the ground is frozen, it is possible to get access during the winter months. Maintenance and pumping of the septic system may be done quickly and easily. Septic system repair should not need digging up your yard. Your septic system will be visible as a reminder
The last advantage may appear to be a bit counter-intuitive. What are the benefits of having a visual reminder of your septic system? Preventing premature septic system collapse is possible through periodic septic system maintenance. With a septic tank riser, you’ll not only be able to identify the position of your septic system, but you’ll also have a visual reminder to have your system pumped at least once every two to three years as well. However, the septic tank risers that we install are intended to fit in with the surrounding environment.
How much does a septic tank riser cost?
Last but not least, the last advantage may appear to be rather counter-intuitive. What is the point of having a visual reminder of your septic system? Why would you want one? Septic system maintenance is important because it protects the system from failing prematurely. With a septic tank riser, you’ll not only be able to identify the position of your septic system, but you’ll also have a visual reminder to have your system pumped at least once every two to three years. However, the septic tank risers that we install are meant to fit in with their surrounding environment.
for an appointment or to learn more about our services.
Felix Septic Service is a company that provides septic service. 2020-05-19T15:44:01-04:00