- Answer: Our 1000 gallon tanks weigh around 8,600 lbs, but it varies slightly among precast manufacturers depending on the dimensions, wall thickness, floor top thickness and rebar reinforcement. How deep is a 1000 gallon septic tank? A 1,000 gallon concrete septic tank is typically 4′ 8″ deep.
How do you measure the depth of a septic tank?
The formula is length (feet) x width (feet) x 1 foot x 7.5 gallons, which is the volume for 1-foot depth. To find the volume for 1 inch I divide the volume by 12 to give me gallons per inch. For our example this is 5.16 feet x 7.5 feet x 1.0 foot x 7.5 gallons per cubic foot = 290.2 gallons.
How deep is the top of a septic tank?
Dig Up The Lids In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter. If you do not find the lid by probing, shallow excavation with a shovel along the tank’s perimeter should reveal the lid.
What are the dimensions of a septic tank?
A typical residential septic tank is usually about 4.5 feet wide x 8.0 feet long x 6 feet tall. Your septic tank may be a different size however. Best practice is to find and measure your septic tank for accurate calculations.
How often does a 1000 gallon septic tank need to be pumped?
For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.
How do I find the lid to my septic tank?
You can locate the lid of your septic tank by poking the ground every few feet with a metal probe. Lids can be buried up to a foot deep on average, so be sure to investigate any bumps that may indicate something is buried underneath.
How deep should septic pipes be?
A standard leach line is considered to be three (3) feet wide and three (3) feet deep with a length as required.
How do I know my septic tank is full?
Here are some of the most common warning signs that you have a full septic tank:
- Your Drains Are Taking Forever.
- Standing Water Over Your Septic Tank.
- Bad Smells Coming From Your Yard.
- You Hear Gurgling Water.
- You Have A Sewage Backup.
- How often should you empty your septic tank?
1000 Gallon Septic Tanks
Disclosure: This post contains affiliate links, which means that if you purchase a product after clicking on one of our links, we may receive a commission or free product from the firms featured in this post. Amazon is a good illustration of this. If we had to pick a single hero from within your house, the septic tank would be a good choice because it is underrated. Your septic tank is the hero you’ve been looking for, working around the clock to keep waste products out of the system. The 1000 gallon (3684.5 L) septic tank system is one of the better options available among many different septic tank systems.
Septic tanks with a capacity of 1000 gallons are an excellent choice for any little property.
The typical cost of a 1000-gallon septic tank installation should range between $2200 and $5200 dollars.
If you’re not sure if a septic tank system is perfect for you, let’s take a closer look at the product’s specifications.
You should consider purchasing a 1000-gallon (3684.5 L) septic tank for the following reasons:
Before You Buy A Septic Tank
Historically, most septic tanks were just concrete boxes with a few holes in the bottom. These would then be buried in your backyard, where they would handle the transportation of your waste products. Sure, it wasn’t a very inexpensive installation, but it was an absolutely necessary component of your house. You can’t function properly without it. While these types of systems are found in the majority of older homes, most states have stricter rules in place. These restrictions will very certainly conflict with the ones that have been put in place at an older residence.
- Inspection of the septic system is the most effective technique to deal with it when purchasing a house that has one.
- This means that they must follow the correct processes and provide you with all of the information you require.
- If you are planning to establish a septic tank system or if you already have one, you should get the tanks examined.
- Please see this article for additional information on septic tank installation and costs.
- They would also need to look for the following things: needed outlet devices, filters, access ports, and the condition and fit of the lid (if applicable).
- It is OK to use documentation that is less than five years old when moving into a home with a septic tank.
- Evaluators would need to know the following information: location; kind of drainfield material; configuration; and size.
The height of the drainfield above the seasonal high water table will also be measured and evaluated. If your possible septic tank is equipped with accessories, those will also be subjected to examination.
What Are The Dimension of A 1000 Gallon Septic Tank?
The 1000 gallon (3684.5 L) septic tank is one of the most commonly used septic tank sizes on the market. It’s simple to obtain and install, but do you really need it? Is your house large enough to accept it? The manufacturer’s specifications for the 1000-gallon septic tank might influence the final size. Septic tanks will be available in a range of sizes, forms, and designs to suit your needs. Depending on the form, each one will have a distinct size and shape. The most typical size for concrete rectangular septic tanks is determined by whether the tank is heavy-duty or low-profile.
- The septic tank is 120 inches in height, 67 inches in width, and 57 inches in depth.
- It’s preferable to speak with a manufacturer about providing you with their size charts if you need precise measurements.
- You’d also have to figure out how much material you’d need.
- Steel septic tanks are built to an even more streamlined set of specifications.
- It is necessary to perform a new calculation for each distinct shape of septic tank.
- If you have a rectangle septic tank, multiply the length by the width and height in feet to get the total volume.
- Multiplying the radius squared by 3.14 and then multiplying the result by the depth will get a rounded septic tank.
- You should also inquire about the interior size of the septic tank from the manufacturer.
- To determine the real capacity of the septic tank, however, you will need to know the interior measurements of the tank.
What Size Home Can A 1000 Gallon Septic Tanks Accommodate?
What size home do I need to fit a 1000 gallon septic tank now that you’ve learned about the different types? This particular feature might differ based on a number of circumstances. As a general rule, a 1000 gallon (3684.5 L) unit should be sufficient for a residence with less than 2500 square feet of space (232.25 sq. m). The 1000-gallon septic tank is required for dwellings with zero to three bedrooms, according to another method of calculation.
Why bedrooms matter?
The number of bedrooms is based on the assumption that all of them are occupied by persons sleeping in them. With a maximum of three bedrooms, you could accommodate anywhere from three to six people as inhabitants of the property. It goes without saying that if you live alone in a three-bedroom house, the computation is invalidated. Is there a more efficient method to perform the calculations? There is, and the overall amount of water used in your home serves as the foundation for it. If your daily water use is equal to or less than 550 gallons (2090 L), a 1000 gallon septic tank is the best option for you.
The computation of water usage takes into account all of the uses that you make of your water. Laundry, car washing, bathing, and toilet use are all examples of this type of usage. More information on how much of a septic tank you would require can be found here.
What’s The Cost of A 1000 Gallon Septic Tank Installation?
Do you know how much it would cost to install a 1000-gallon septic tank? This installation will be dependent on a number of criteria, the most important of which being the condition of the septic tank. A 1000-gallon septic tank will cost between $2200 and $5200, depending on the manufacturer. What is the cause of the significant range discrepancy? It is possible to save money up front or make an immediate investment in your septic tank, depending on the materials used. Pre-cast concrete septic tanks are the least expensive to construct, with construction costs ranging between $600 and $1000.
- It will cost around $2300 to install a fiberglass septic tank, which is more durable than a plastic tank.
- Anaerobic and aerobic septic tanks are the two most popular types of septic tanks.
- Because of the unique setup required for aerobic systems, they are more expensive to install than anaerobic systems.
- Starting with a simple drainfield with a conventional 36-inch (91.44 cm) broad gravel trench, most of the material required would be 12 inches (30.48 cm).
- On the basis of supplies alone, you should expect to pay between $15 and $30 per ton of gravel.
- Risers will add another $100 to $200 to the overall cost, depending on the material used.
- This amount does not include any necessary maintenance charges that will be incurred.
- Aerobic septic tanks would require frequent maintenance, with ATUs being the greatest financial burden across all systems.
Concrete Vs Plastic Septic Tanks: Which One Is Better?
Concretevs. Whether or whether plastic septic tanks are environmentally friendly has been a debate since their inception. Metals such as steel and fiberglass are also available, each with their own set of pros and disadvantages. Which one is more effective for you? Concrete septic tanks are extremely sturdy and may last for decades if they are installed correctly. Even if you utilize high-quality materials, fractures in concrete septic tanks are possible if the construction is substandard. These tanks are susceptible to cracking or separating at any time.
- It might also be a concern if you are having a blockage.
- Plastic, on the other hand, is extremely inexpensive and extremely resistant to rust, allowing the installation to survive for a significantly longer period of time.
- Plastics are also susceptible to punctures, which might result in the failure of your septic tank.
- If you are having a plastic septic tank installed, make sure to request special attention.
- A well-executed installation may save you a significant amount of money.
- Steel is considered to be the least attractive of all the available materials.
- Steel septic tanks have a life expectancy of 20 to 25 years.
- The last and most expensive substance is fiberglass, which is the most expensive of the group.
- The key difference, though, is that the structure is far more durable.
- The majority of fiberglass septic tanks are strong and long-lasting, but they can be difficult to operate with.
You must, however, pay close attention to the manner in which your contractor is installing it. You would also want to avoid putting anything heavy on top of the septic tank since it will not be long-lasting and will collapse.
Conclusion
Concretevs. Since its inception, the use of plastic septic tanks has been a source of debate. Metals such as steel and fiberglass are also available, each with its own set of pros and disadvantages. In your opinion, which one is more effective? Concrete septic tanks are extremely sturdy and may last for decades if they are correctly installed. The use of substandard materials might result in fractures in concrete septic tanks even in the best-case scenario. It is possible for these tanks to break or separate.
- If you are suffering a blockage, this might also be an issue.
- While plastic is less expensive and more resistant to corrosion than metal, it provides an installation with a longer lifespan.
- Also susceptible to punctures, plastics might cause your septic tank to fail prematurely.
- Specifically request that special attention be used while having a plastic septic tank built.
- You might save a significant amount of money by doing a thorough installation.
- Steel is considered to be the least attractive of all the building materials available today.
- Generally speaking, steel septic tanks have a lifespan of 20–25 years.
- The last and most expensive substance is fiberglass, which is the most expensive of the group.
- It is the more robust structure that distinguishes the two models, though.
- The majority of fiberglass septic tanks are strong and long-lasting, but they can be difficult to install and maintain properly.
- Putting anything hefty on top of the septic tank would also be a bad idea since it would make the tank less long-lasting.
1000 Gallon Septic Tanks
Our 1000 gallon septic tank, which is constructed of precast concrete, has a capacity of 1000 gallons of liquid capacity. With this mid-seam design concrete septic tank, you may connect the pipe from the home to either one of the tank’s side or center inlets, depending on your preference. The same choice is accessible at the tank’s outlet, whether it is exiting to the leach field from the tank’s side or exiting from the tank’s central outlet.
To connect the pipe entering and exiting the precast construction, Polylok IV closed-end boots are utilized. These boots provide a flexible, waterproof connection that allows the pipe to move freely throughout the structure. ASTM C 1227NPCA is fully compliant with all best-practice criteria.
| 1000 Gallon Septic Tank DimensionsDetails | |
|---|---|
| Tank dimensions | 8’ x 5’8” x 5’2” |
| Number of bedrooms supported | Formerly 2 Now used as a pump station, holding tank, or adding to an existing system |
| Pre-assembled | Yes |
| Ideal for high water table | No, but our 1000 gallon monolithic septic tank is. |
| Average retail cost | $1062.50 |
| Number of covers (lids) | 2 |
| Can come in traffic rated (H20) capacity | Yes |
| Concrete strength | 5,000 PSI |
| What are its gallons per vertical inch | 21 |
| Weight | 8,600 lbs. |
| Fiber re-enforced | Yes |
| Number of inlets boots (Up to schedule 40pipe can slide through) | 3 |
| Height of inlet from bottom of tank to bottom of pipe | 51” |
| Number of outlets boots (Up to schedule 40 pipe can slide through) | 3 |
| Height of outlet from bottom of tank to bottom of pipe | 48” |
| Required height of inlet baffle (20% of liquid level) | 9” |
| Required height of outlet baffle (40% of liquid level) | 18” |
Frequently Asked Questions
In response to your question, the typical retail price for a 1000-gallon concrete septic tank is $1062.55.
What is the most common septic tank size?
It is estimated that a 1000 gallon concrete septic tank will cost $1062.50 on average at the time of purchase.
Is it ideal for high water table properties?
A monolithic septic tank is recommended for locations with high water tables since the seam is located at the very top of the septic tank, rather than at the bottom. Mid-seam and monolithic types of 1000 gallon septic tanks are both available from Septic Tanks Direct.
How much does a 1000 gallon concrete septic tank weigh?
A monolithic septic tank is recommended for locations with high water tables since the seam is located at the very top of the tank. Mid-seam and monolithic types of 1000 gallon septic tanks are both available.
How deep is a 1000 gallon septic tank?
Septic tanks made of concrete are generally 4′ 8″ deep and hold 1,000 gallons of water.
How many bedrooms does a 1000 gallon septic tank support?
Answer:In New Hampshire, the minimum need used to be many, then two, and currently a 1250 gallon septic tank is the bare essential. In New Hampshire, a 1000-gallon tank is currently often utilized as a holding tank or pump station, or to increase the capacity of an existing septic system.
Can you drive over a 1000 gallon septic tank?
It is determined by the design rating. We make it in three different configurations: H-10 is designed for pedestrian activity and has a live load of 300 pounds per square foot plus a burial depth of 3 feet. HD is intended for burial depths up to 5 feet. H-20 is designed for drive-over traffic and burial depths up to 6 feet.
1000 Gallon Septic Tank Dimensions, Features/Details*
- In two-bedroom installations, a 1000-gallon septic tank is utilized. This structure is frequently used as a pump station. For many years, the standard size in New Hampshire was the same as the standard size in Maine. This is the smallest size that may be used as a grease trap and is suggested for this application. It is shipped pre-assembled to make installation as simple as possible
* Standards for the state of New Hampshire are displayed; click here for information on other states’ specifications. You might also be interested in these widely used precast concrete septic tanks if you like what you see.
- Septic Tanks: Precast Concrete Septic Tank – 1250 Gallons
- Precast Concrete Septic Tank – 1250 Gallons Monolithic
- Precast Concrete Septic Tank – 1500 Gallons Monolithic
- Precast Concrete Septic Tank – 1600 Gallons
- Precast Concrete Septic Tank – 1600 Gallons Monolithic
- Precast Concrete Septic Tank – 2000 Gallons
- Precast Concrete Septic Tank – 2000 Gallons Monolithic
- Precast Concrete Septic Tank – 1025
a little about the author: The Andrew J. Foss, Inc. precast concrete firm was founded by my father in 1963 when he was just 19 years old. My precast education began at a very young age for myself. Everything I know about producing high-quality precast concrete goods, from septic tanks to concrete headwalls, was passed down to me by him. He also taught me that in order to be successful in business, you must provide a superior product and treat your customers the way you would like to be treated yourself.
How Much Do Septic Tanks Cost?
As an alternative to hooking up your home to a municipal sewer system, you may install a septic system on your own, which is composed of a container placed underground on your land that retains and processes the water and waste that escapes your home through plumbing pipes. Septic tanks should only be installed by qualified specialists, whether you’re building a new house and need a septic system installed or replacing an existing septic system. Because of the project’s intricacy and magnitude, heavy machinery, precise excavating, and plumbing hookups are required, all of which might be devastating if not completed correctly.
- Properties in areas where the earth floods often, for example, would experience a high frequency of septic issues.
- After that, a contractor must excavate in the vicinity of the tank and drain field in preparation for installation, which will involve plumbing connections to the residence.
- Septic system installation needs meticulous design, the knowledge of a professional, and at the very least a few thousand dollars to be completed properly.
- What Is the Average Cost of a Septic Tank?
- It is possible that you have already attempted to repair your septic tank or system, therefore this fee will be in addition to your original investment.
- Glenn Gallas, vice president of operations at Mr.
- It is possible that you will spend even more depending on the size and location of your property, as well as the size and substance of your tank and the type of septic system you want.
A septic tank can be constructed from four different types of materials: —Concrete.
—Plastic.
—Fiberglass.
—Steel.
Steel is the least popular building material on the market today.
One thousand gallon tank for a three-bedroom house with less than 2,500 square feet.
Septic tanks under 1,000 gallons in capacity are expected to cost between $600 and $1,000, according to HomeAdvisor, while tanks of 1,200 gallons or greater in capacity are expected to cost between $1,200 and $1,600, according to the same source.
Septic tank installation will be delayed if there is a lot of rain that soaks the soil, according to Michael DeCosta, director of branch operations for mergers and acquisitions at Wind River Environmental, a mechanical systems contracting company that installs and repairs septic tanks, among other specialties.
- “If you go to Florida or Cape Cod, where there’s a lot of sand, such installations take a day,” adds DeCosta, who is headquartered in the Boston region.
- When it comes to designing a septic system, DeCosta explains that in many cases the local planning agency or board of health will provide a list of qualified engineers from which to pick.
- The blueprints may then be sent to multiple septic installers for price and assistance, DeCosta explains.
- The overall cost of your septic system installation varies depending on the size of your home, the size of your land, the proximity to a floodplain, the soil, the type of tank material you select, and a variety of other factors.
- If you’re planning to replace any element of your present septic system, a septic installation specialist will most likely want to come out to your site to take measurements and search for problems before proceeding.
- Multiple professional visits for estimates may appear to be excessive, but the information you acquire from each interaction may help you determine which firm offers the best materials and timing for your project, rather than simply choosing the lowest price.
- Listed below are a few of the components that contribute to the overall cost of a septic system installation or the cost of replacing an existing tank: • Sewer line • Distribution box • Field lines • Sewer line — Drainage field, also known as a leach field.
– The tank’s lid.
— Tank top.
In the event that only one or two components of the system appear to be causing the problem, Gallas says that the sewage line, septic tank, distribution box, and field lines can all be replaced independently.
Maintenance, on the other hand, is essential since little faults can accumulate over time and generate greater ones.
Depending on the expert, a septic tank should only need to be drained every three to five years.
If you discover a problem with your plumbing or observe water backing up into your house, call a plumber to come out and analyze the problem for you.
According to HomeAdvisor, a plumber’s hourly rate typically ranges from $45 and $200, depending on where you reside in the country.
More from the news organization U.S. News & World Report What Is That Strange Smell in My Home? 15 Mudroom Design Ideas for Your Residence Choose Energy-Efficient Windows for Your Home Using This Guide What Is the Average Cost of a Septic Tank? The article first published on usnews.com.
More from WTOP
Tanks-A-Lot has a long and illustrious history of constructing and distributing high-quality concrete septic tanks in Alberta, having started operations in 1982. In our new production plant, we construct our tanks in accordance with CSA B66 requirements. In order to do this, we have designed our septic tanks with the following industry-leading features:
- A raised lip manhole on a septic tank roof is certified to CSA B66-10 standards, and it provides greater sealing for concrete manhole extensions. Additionally, ultra-rib (plastic) extensions are offered. Flexible rubber intake of 4 inches in diameter for decreased failures due to movement of the home sewage line
- A 2″ PVC output with a threaded connector for improved connecting of pressure lines to the pump and septic field Limited guarantee on materials and workmanship for a period of 20 years
What are Septic Tanks?
Septic tanks are two-compartment wastewater treatment devices that are located underground. In rural areas where there is no public sewer system, these buildings are commonly utilized to collect and treat waste. Septic tanks are often used in conjunction with a septic or drain field system, which treats home wastewater by using soil drainage. Sewage holding tanks, on the other hand, are single-compartment tanks that collect and store wastewater from households and businesses. When the tanks are completely full, a vacuum truck comes to empty them.
How Do Septic Tanks Work?
Septic tanks function in the following ways:
- The intake pipe is responsible for directing wastewater from your house into the septic tank. Using the working chamber, it is possible to separate heavy materials from lighter fats, oils, and greases. Transfer of the liquid, also known as effluent, from a baffle to the pump chamber. The wastewater is transported to a septic field by a siphon assembly or an electric pump. The septic field is generally comprised of an arrangement of perforated pipe contained within a trench. In the process of draining through the soil, wastewater is accepted, treated, and dispersed by the soil, finally discharging into groundwater.
It is necessary to consider site considerations such as altitudes, lot size, soil types, and municipal regulations while designing a septic field. So, qualified installers and professional designers are typically tasked with the task of creating septic system designs.
What Size Septic Tank Do I Need?
The size of your septic tank is determined by a number of different factors. The minimal operating capacity necessary, as defined by the Alberta Private Sewage System Standard of Practice, is provided by the following computation. However, some fixtures, such as trash disposal systems and hot tubs, should be given additional care in this regard. In addition, the minimum sludge capacity must be taken into mind as well. Number of bedrooms multiplied by 1.5 people each bedroom multiplied by 75 gallons per person per bedroom Consider the following example: according to the calculations above, a three-bedroom residence must have a working capacity of about 337 gallons, which can be attained with our P1220 septic tank.
Which Type of Septic Tank is Best? Concrete vs. Plastic Septic Tanks
Concrete septic tanks have various advantages over plastic septic tanks, including the following:
- A concrete septic tank weighs substantially more than a plastic tank of the same size. Concrete tanks will not float as a consequence
- The long-term performance of a plastic tank is dependent on the care used during installation to ensure that the tank’s support structure is achieved. Concrete septic tanks, on the other hand, have structural stability built in from the beginning. Plastic tanks are more prone to damage, and additional precautions must be taken to ensure that they do not develop punctures during the backfilling process to prevent this. Constructed concrete septic tanks, on the other hand, are extremely long-lasting and sturdy
How Deep Do I Bury My Septic Tank?
Site considerations such as the frost line have a considerable influence on the depth of a septic tank’s underground burial. As a result, burial depths are typically between 2′ and 10′ below the surface of the soil. Our 1220P and 1518P models offer the highest burial depth ratings in the underground concrete tank industry, and they are available in two sizes. Please get in touch with us if you require any information on sewage systems in Alberta or if you would want to be referred to a licensed installer.
Septic Systems
We are currently in the process of uploading our items on the site, so bear with us. If you don’t find what you’re searching for, please get in touch with us for more assistance. 1-25 of 62 total items shown (s) 1-25 of 62 total items shown (s)
- Classification:Septic Tanks
- Uses:Residential
- Classification:H-10, Old Style
- Type:Concrete Septic Tank
- Capacity:1000 gal.
- Weight:12,025 lbs
- Capacity:1000 gallons
- Exterior Dimensions:49″ H x 6’4″ W x 10’5″ L
- Invert Out:34″
- Weight:12,025 lbs
- Classification:Septic Tanks
- Uses:Residential, Shallow Bury
- Style:New Style
- Type:Concrete, Septic Tank
- Capacity:1000 gallon
- It has a weight of 11,750 pounds and a capacity of 1000 gallons. Its exterior dimensions are 49 inches high by 6 feet four inches wide by 10 feet five inches long
- The invert out is 34 inches.
- Commercial, residential, and shallow burial applications are included under the category of Septic Tanks. The H-20 classification is applied to concrete, septic tanks of up to 1000 gallons in capacity.
- Approximately 23,000 pounds
- 1,000-gallon capacity
- Exterior dimensions: 49″ H x 6′-10″ W x 12′-10″ L
- Invert out: 29 1/2″
- Interior dimensions: 49″ H x 6′-10″ W x 12′-10″ L
- Listed in the category of Lift Stations / Pump Tanks
- Intended use is residential and shallow burial
- Class is “old style
- ” type is “Lift Station
- ” and the capacity is 1000 gallons.
- It has a capacity of 1,000 gallons and weighs 12,845 lbs. The outside dimensions are 54.5″ H x 6′-4″ W x 10′-5″ L
- The invert out is 39.5″ (CL) and the invert in is 37″
- The invert out is 39.5″ (CL).
- Residential, shallow burial
- Class:New Style
- Type:Lift Station
- Size:1000 gallon
- Category:Lift Stations / Pump Tanks
- Use:Lift Stations / Pump Tanks
- Axle weight:12,416 lbs
- Tank capacity:1000 gallons
- Exterior dimensions:54.5″ H x 6′-4″ W x 10′-5″ L
- Rated weight:12,416 lbs Invert Out (CL): 39.5″
- Invert In (CL): 37″
- 12 416 lbs
- 1000 gallons
- 54.5″ H x 6′-4″ W x 10′-5″ L
- Weight:12 416 lbs
- Capacity:1000 gallons Outer circumference (CL): 39.5″
- Inner circumference (CL): 37.5″
- Weight:10,510 lbs
- Capacity:1000 Gallons
- Exterior Dimensions:5′-9″ H x 5′-4″ W x 8′-0″ L
- Weight:10,510 lbs
- The invert out measurement is 56.5″ (CL)
- The invert in measurement is 54.5″
- The product falls under the category of Lift Stations / Pump Tanks. The intended use is residential. The product is classified as New Style.
- Weight:10,185 lbs
- Capacity:1000 Gallons
- Exterior Dimensions:5′-9″ H x 5′-4″ W x 8′-0″ L
- Weight:10,185 lbs
- The invert out measurement is 56.5″ (CL)
- The invert in measurement is 54.5″
- 5′-9″ high, 5′-4″ wide, and 8′-0″ long
- Weight:10,185 pounds
- Capacity:1000 gallons
- Exterior dimensions:5′-9″ high, 5′-4″ wide, and 8′-0″ long. The invert out measurement is 56.5″ (CL)
- The invert in measurement is 54.5″.
- Axle weight:9,590 pounds
- Tank capacity:1,000 gallons
- Exterior dimensions (in inches): 64 inches high by 5 feet 4 inches wide by 8 feet 0 inches long
- Invert out measurement: 51 1/2 inches.
- Axle weight:9,590 pounds
- Tank capacity:1,000 gallons
- Exterior dimensions (in inches): 64 inches high by 5 feet 4 inches wide by 8 feet 0 inches long
- Invert out measurement: 51 1/2 inches
- Axle weight:9,590 pounds
- Tank capacity:1,000 gallons
- Exterior dimensions (in inches): 64 inches high by 5 feet 4 inches wide by 8 feet 0 inches long
- Invert out distance:51 1/2″
- Weight:9,590 lbs
- Capacity:1,000 gallon
- Exterior Dimensions:64″ H x 5′-4″ W x 8′-0″ L
- Invert Out:51 1/2″
- Weight:10,757 lbs
- Capacity:1,000 gallons
- Exterior Dimensions:67″ H x 5’4″ W x 8’0″ L
- Invert Out:51 1/2″
- Overall Dimensions:67″ H x 5’4″ W x 8’0″ L
- Category:Leaching Products
- Application:Commercial and Residential
- Classification:Pedestrian
- Material:Concrete
- Dimensions: Interior Dimensions:86″L x 29.75″W x 16″H
- Exterior Dimensions:90″L x 33.75″W x 21″H
- Weight:Base: 1,165 lbs./ Cover: 770 lbs. Invert Out: 5.5 inches
- Invert In: 6.5 inches
- Septic tanks are classified as follows: Category:Septic Tanks
- Use:Commercial, Residential
- Class:H-20
- Type:Septic Tank
- Size:1500 gallon
- Weight:23,750 lbs
- Capacity:1,500 gallons
- Interior Dimensions: 46″ H x 6′-0″ W x 12′-0″ L
- Weight:23,750 lbs
- Exterior Dimensions: 61.5″ H x 6′-10″ W x 12′-10″ L
- Invert Out: 42″
- Interior Dimensions: 61.5″ H x 6′-10″ W x 12′-10″ L
- Dimensions: 46″ high by 6’0″ wide by 12’0″ long
- Weight 23,750 pounds
- Capacity 1,500 gallons
- Interior dimensions: 46″ high by 6’0″ wide by 12’0″ long. 61.5″ H x 6′-10″ W x 12′-10″ L
- Invert Out: 42″
- Exterior Dimensions: 61.5″ H x 6′-10″ W x 12′-10″ L
- 15350 pounds
- Capacity: 1500 Gallons
- Exterior Dimensions: 69.5″ H x 6′-4″ W x 10′-6″ L
- Invert Out: 55.5″ (CL)
- Invert In: 53″
- Weight: 15350 lbs
- Exterior Dimensions: 6′-4″ H x 10′-6″ L
- The item is in the category of Lift Stations / Pump Tanks
- The intended use is for residential
- The item is in the class of Old Style
- The item is in the size of 1500 gal.
- 15350 pounds
- Capacity: 1500 Gallons
- Exterior Dimensions: 69.5″ H x 6′-4″ W x 10′-6″ L
- Invert Out: 55.5″ (CL)
- Invert In: 53″
- Weight: 15350 lbs
- Exterior Dimensions: 6′-4″ H x 10′-6″ L
- The system is classified as follows: Category:Septic Systems
- Use:Residential
- Class:H-10
- Type:Septic Tank
- Size:1500 gallon
- It has a weight of 13,782 pounds and a capacity of 1,500 gallons. Its outside dimensions are 64 inches high by 6 feet four inches wide by 10 feet six inches long.
- A new style septic tank in the category of septic systems, with a capacity of 1500 gallons and an intended use of residential.
- It has a weight of 13,782 pounds and a capacity of 1,500 gallons. Its outside dimensions are 64 inches high by 6 feet four inches wide by 10 feet six inches long.
- Commercial and residential septic tanks are included in this category. Class H-20 septic tanks are included in this category as well.
- Weight: 25,025 pounds
- Capacity: 2,000 gallons
- Interior Dimensions: 52.5 inches “Dimensions: x 6′-0″ W x 12′-0” L
- Exterior Dimensions: 68″ high by 6’10” wide by 12’10” deep “L
- L
- Lift Stations / Pump Tanks
- Residential
- Class:Old Style
- Type:Lift Station
- Size:2000 gallon
- Category:Lift Stations / Pump Tanks
- Weight:17,330 lbs
- Capacity:2,000 Gallons
- Exterior Dimensions:79.5″ H x 6′-4″ W x 10′-6″ L
- Weight:17,330 lbs
- The invert out measurement is 66″ (CL)
- The invert in measurement is 63″.
- The product falls under the category of Lift Stations / Pump Tanks. The intended use is residential
- The class is new style
- The type is lift station
- And the size is 2000 gallon.
- Weight:17,330 lbs
- Capacity:2,000 Gallons
- Exterior Dimensions:79.5″ H x 6′-4″ W x 10′-6″ L
- Weight:17,330 lbs
- The invert out measurement is 66″ (CL)
- The invert in measurement is 63″.
- Category:Septic Systems
- Uses:Commercial and Residential
- Classification:H-10, Old Style
- Type:Septic Tank
- Capacity:2000 gallon
- It has a weight of 16,552 pounds and a capacity of 2,000 gallons. Its exterior dimensions are: 74 inches high by 6 feet four inches wide by 10 feet six inches long
- The invert out is 60 inches.
- Septic tanks are classified as follows: Category:Septic Tanks
- Use:Commercial, Residential
- Class:New Style
- Type:Septic Tank
- Size:2000 gallon
- It has a weight of 16,280 pounds and a storage capacity of 2,000 gallons. Its exterior dimensions are 74 inches high by 6 feet four inches wide by 10 feet six inches long
- The invert out is 60 inches.
- Category:Leaching Products
- Application:Commercial and Residential
- Classification:Pedestrian
- Material:Concrete
- Weight: Base: 145 lbs., Cover: 55 lbs., Interior Dimensions: 12″L x 12″W x 8.75″H, Exterior Dimensions: 20.25″L x 20.25″W x 13.25″H, Dimensions: 20.25″L x 20.25″W x 13.25″H Outer inversion: 5.5″
- Inward inversion: 3.5″
- Category:Leaching Products
- Application:Commercial and Residential
- Classification:Pedestrian
- Material:Concrete
- Weight: Base: 55 lbs., Lid: 22 lbs., Interior Dimensions: 8″L x 8″W x 10″H, Exterior Dimensions: 11.5″L x 11.5″W x 13.5″H, Dimensions: 11.5″L x 11.5″W x 13.5″H Invert Out: 3″
- Invert In: 4″
- Invert Out: 3″
- Lift Stations / Pump Tanks are classified as follows: Commercial, Residential
- Class:H-20
- Type:Lift Station
- Size:3′ Dia
- It weighs 2,625 pounds and has a capacity of 155 gallons and 98 gallons, respectively. Three-foot diameter by three-foot-one-inch high interior dimensions Exterior Dimensions: 3’8″ Dia. x 3’10” H
- Invert Out: 25″ CL
- Invert In: 29.5″
- Lift Stations / Pump Tanks
- Residential
- Class:Pedestrian, Old Style
- Type:Lift Station
- Size:3′ Dia
- Category:Lift Stations / Pump Tanks
- 155 gal/98 gal (HWA)
- Weight: 2,270 lbs
- Capacity: 155 gal/98 gal Approximately 3′ Diameter x 2’11” Height in the inside
- Exterior Dimensions: 3’5″ in diameter x 3’7″ in height
- Invert Out: 22″ CL
- Invert In: 26.25″
- Invert Out: 22″ CL
