How Clean Is The Water Exiting From The Septic Tank Frain Field? (Solved)

  • A septic drain field is the area where effluents, which are liquid waste products inside the system, are distributed into the soil, after which the liquids percolate through surrounding soils. This percolating process strips the effluent of harmful microorganisms and leaves relatively clean water behind as a result.

Is leach field water clean?

The leach field, also referred to as a drain field, receives the wastewater from the septic tank. This final filtration step involves bacteria and other microbes that further treat the wastewater before it reaches the water table. This natural purification principle prevents groundwater contamination.

Can you drink water from septic system?

Septic systems provide wastewater treatment for many homeowners who also often get their drinking water from private wells. If a septic system is not working properly or is located too close to a drinking water well, contaminants from the wastewater can end up in drinking water.

How long does it take for a leach field to dry out?

Except for mound systems, most drainfields are 2 to 4 feet below the ground surface. The groundwater will take time to recede to the level of the bottom of the drainfield. This could happen within a week or two or require a couple of months.

Should I see water in my septic cleanout?

The sewer cleanout is often found inside your basement or right outside your house. It features a circular or rectangular cap that’s often labeled “sewage” or “cleanout.” It sometimes has a little hole in the cap. If you see any sewage or water around the outside of that cap, you definitely have a blocked sewage drain.

How long does a drain field last?

It’s important to consider the life expectancy of a drain-field, too. Under normal conditions and good care, a leach-field will last for 50 years or more. Concrete septic tanks are sturdy and reliable but not indestructible.

How do you unclog a drain field?

Can Anything Unclog an Old Septic Drain Field?

  1. Shock the System With Bacteria. A septic system bacteria packet can help clean out a clogged drain field by allowing waste material to break down and drain through.
  2. Reduce Water Usage.
  3. Avoid Harsh Chemicals.
  4. Change to Gentler Toilet Paper and Soap.
  5. Contact a Septic Professional.

How do you clean water out of a septic tank?

To clean your septic tank, uncover the tank, look for cracks and leaks, clean out the filter, measure the depth of the waste inside the tank, then have a professional pump out the waste.

Where does water end up after it leaves the septic system?

Where does the water go after you flush the toilet or drain the sinks in your home? When the wastewater flushed from your toilet or drained from your household sinks, washing machine, or dishwasher leaves your home, it flows through your community’s sanitary sewer system to a wastewater treatment facility.

How do you tell if your septic tank is full?

How to tell your septic tank is full and needs emptying

  1. Pooling water.
  2. Slow drains.
  3. Odours.
  4. An overly healthy lawn.
  5. Sewer backup.
  6. Gurgling Pipes.
  7. Trouble Flushing.

How do I know if my drain field is failing?

The following are a few common signs of leach field failure:

  1. Grass over leach field is greener than the rest of the yard.
  2. The surrounding area is wet, mushy, or even has standing water.
  3. Sewage odors around drains, tank, or leach field.
  4. Slow running drains or backed up plumbing.

How far down is a leach field?

A typical drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36 inches.

What is the most common cause of septic system failure?

Most septic systems fail because of inappropriate design or poor maintenance. Some soil-based systems (those with a drain field) are installed at sites with inadequate or inappropriate soils, excessive slopes, or high ground water tables.

Should there be water in the main drain?

The first answer is YES: Your sewer drains should hold water in certain locations. The reason for the water in the drainage fixture is to prevent rodents and smells entering the building. If you do however notice excessively high levels of water there could be a blocked drain causing the problem.

How often do I need to clean out my septic tank?

How often do I have to clean my septic tank? Ideally, once every two to three years. Though your septic tank has an extremely large capacity, it’s still important that you empty it on a regular basis.

How often pump out septic?

Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.

Septic Systems and Drinking Water

1. Bathrooms and Kitchens Water from toilets, sinks, showers, and other appliances is called wastewater and can be harmful to human health. Wastewater contains harmful bacteria, viruses, and nutrients that could make you sick if it comes in contact with your drinking water well. Make sure the wastewater is properly treated by your septic system and that your drinking water well is located at the appropriate distance (set back) from your and your neighbor’s system. Avoid flushing other chemicals or medications down the drain or toilet since they could also contaminate your drinking water well.
2. Septic Tank Wastewater generated in your home exits through a drainage pipe and into a septic tank. The septic tank is a buried, water-tight container that holds wastewater for separation and treatment. The solids settle to the bottom (sludge) and fats, oil and grease float to the top (scum). Microorganisms act to break down the sludge and destroy some of the contaminants in the wastewater. Your septic tank should be serviced and pumped on a regular basis to make sure it’s working properly. Learn more about how your septic system works.
3. Drainfield The drainfield is a shallow, covered trench made in the soil in your yard. Partially treated wastewater from the septic tank flows out through the drainfield, filters down through the soil and enters the groundwater. If the drainfield is overloaded with too much liquid or clogged with solids, it will flood and cause sewage to surface in your yard or back up into your home.
4. Wastewater Treatment in Soil Filtering wastewater through the soil removes most bacteria and viruses (also known as pathogens) and some nutrients. While soil can treat many contaminants, it cannot remove all of them (e.g., medicines, some cleaning products, other potentially harmful chemicals). If untreated wastewater surfaces in the yard, wastewater may contaminate your drinking water through an unsecured well cap or cracks in the well casing. It’s important to avoid flushing medication and chemicals into your wastewater since it could contaminate your drinking water.
5. Water Table The water table is found where you first hit water if you dig a hole into the ground.
6. Groundwater The water below the water table is called groundwater. Groundwater flowing underneath a drainfield captures any remaining contaminants released from the septic system. A drinking water well is at greater risk of becoming contaminated if it is in the path of groundwater flow beneath a septic system.
7. Drinking Water Well A drinking water well is drilled or dug into the groundwater so water can be pumped to the surface. Deep wells located farther away from a septic system and not in the path of the groundwater flow from the septic system are least likely to be contaminated. Drinking water wells should be regularly tested to ensure your home’s water is safe to drink. Learn about private water wells.
8. Setback Distance Most states or local governments require a specific horizontal distance (or setback) between a septic system and a drinking water well. If the soil where you live is sandy, or porous, you may want to place your well farther away than the minimum required distance. Contamination is less likely the farther apart a well is from a septic system. Consult your local health department about required setback distances in your area.
9. Could my well be affected? Your septic system could contaminate your drinking water well or a nearby well under certain conditions. Remember to test the drinking water from your well regularly and take corrective action as needed.The contamination risk to your well is LOWER:
  • The greater the distance between the well and the septic system
  • The greater the depth of the well and whether it is on bedrock or below a specified layer of silt or clay
  • And the greater the distance between the well and the septic system If your septic system is pumped and maintained on a regular basis, you can avoid this.

The following factors increase the danger of pollution to your well:

  • The well is at a shallow depth and in permeable soil
  • It is downgradient of the septic system (i.e., groundwater flows from the septic system towards the well)
  • There are many homes on septic systems near the well
  • Or the well and/or septic system have been poorly constructed or maintained (i.e., contaminants can enter a cracked drinking well casing from groundwater or surface water).
Learn other ways to keep your private well safe from possible sources of contamination.

How Your Septic System Works

Underground wastewater treatment facilities, known as septic systems, are often employed in rural regions where there are no centralized sewage lines. They clean wastewater from residential plumbing, such as that produced by bathrooms, kitchen drains, and laundry, by combining natural processes with well-established technology. A conventional septic system is comprised of two components: a septic tank and a drainfield, often known as a soil absorption field. It is the septic tank’s job to decompose organic matter and to remove floatable stuff (such as oils and grease) and solids from wastewater.

Alternate treatment systems rely on pumps or gravity to assist septic tank effluent in trickling through a variety of media such as sand, organic matter (e.g., peat and sawdust), constructed wetlands, or other media to remove or neutralize pollutants such as pathogens that cause disease, nitrogen, phosphorus, and other contaminants.

Specifically, this is how a typical conventional septic system works:

  1. All of the water that leaves your home drains down a single main drainage pipe and into a septic tank. An underground, water-tight container, often composed of concrete, fiberglass, or polyethylene, serves as a septic system’s holding tank. Its function is to retain wastewater for a long enough period of time to allow particles to sink to the bottom and form sludge, while oil and grease float to the surface and produce scum. Sludge and scum are prevented from exiting the tank and moving into the drainfield region by compartments and a T-shaped outlet. After that, the liquid wastewater (effluent) exits the tank and flows into the drainfield. The drainfield is a shallow, covered hole dug in unsaturated soil that serves as a drainage system. Porous surfaces are used to release pretreated wastewater because they allow the wastewater to pass through the soil and into the groundwater. In the process of percolating through the soil, wastewater is accepted, treated, and dispersed by the soil, finally discharging into groundwater. Finally, if the drainfield becomes overburdened with too much liquid, it can flood, causing sewage to flow to the ground surface or resulting in toilet backups and sink backups. Finally, wastewater percolates into the soil, where it is naturally removed of harmful coliform bacteria, viruses, and nutrients. Coliform bacteria are a kind of bacteria that may be found in the intestines of humans and other warm-blooded animals, with humans being the most common host. As a result of human fecal contamination, it is a sign of this.

The Guadalupe-Blanco River Authority has built an animated, interactive model of how a residential septic system works, which you can view here.

Do you have a septic system?

It’s possible that you’re already aware that you have a septic system. If you are not sure, here are some tell-tale symptoms that you most likely are:

  • You make use of well water. In your home, the water pipe that brings water into the house does not have a meter. In the case of a water bill or a property tax bill, you will see “$0.00 Sewer Amount Charged.” It is possible that your neighbors have a septic system

How to find your septic system

You can locate your septic system once you have confirmed that you have one by following these steps:

  • Taking a look at the “as constructed” drawing of your house
  • Making a visual inspection of your yard for lids and manhole covers
  • Getting in touch with a septic system service provider for assistance in locating it

Failure symptoms: Mind the signs!

A bad odor is not necessarily the first indicator of a septic system that is failing to work properly. Any of the following signs should prompt you to seek expert assistance:

  • Water backing up into the drains of homes and businesses
  • It is especially noticeable in dry weather that the drainfield grass is bright green and spongy. The presence of standing water or muddy soil near your septic system or in your basement
  • A strong stench emanating from the area surrounding the septic tank and drainfield

Reasons Why Your Drain Field Is Wet

If you possess a septic system, it’s possible that you aren’t familiar with the technical specifics of how everything works. You had someone come in and install it, and they also came in every now and then to check on it, correct? That’s OK, but you’ve recently observed that the ground around your septic tank is perpetually moist for some reason. The most fundamental components of a septic system are the septic tank, the drain field, and all of the accompanying pipe. If the ground around your septic tank is soaked, it is usually due to a combination of factors.

Surface soil above a septic drain field that has become wet has a number of probable causes, and there are a number of potential solutions to each of these problems.

Debris BuildupClogs

When it comes to septic systems, it is possible that you are not familiar with the technical aspects of how they operate. You had it installed by a professional, and you have someone come in every now and then to check on it, correct. However, you’ve recently discovered that the grounds surrounding your septic tank are perpetually moist, for some reason. What gives? Basic components of a septic system include the septic tank, drain field, and all of the accompanying pipe. There are several possible sources of water in the area surrounding your septic tank.

There are a few various problems that might potentially be the source of damp surface soil above the septic drain field, as well as a few alternative solutions to repair them:

Absence of Beneficial Bacteria

The bacteria that live in the septic system break down the solid waste materials that are brought into it and are important to the system’s effective operation. The germs, on the other hand, can be eliminated if the drain is not used properly. Chemical chemicals, such as powerful solvents and antibacterial cleansers, can damage system components and deplete the population of beneficial bacteria when used in large quantities. As a result, the system’s capacity to digest solid waste materials is impaired, and the accumulation of solid waste might block the system’s drain field system.

System Component Damage

Despite the fact that drain field components can be damaged in a variety of ways, the most typical causes are soil compaction, root invasion, and the general age of the system. Soil compaction can be caused by both large constructions and vehicles operating above the drain field. The resultant weight has the potential to crush and shatter critical subsurface components, preventing any effluent channeling from occurring. However, invasive roots are the most common source of fractures and gaps in the components of an irrigation or drainage system.

It is also necessary to consult with an expert in order to assess whether any system components need to be upgraded or replaced.

Infrequent Pumping

Despite the fact that drain field components can be damaged in a variety of ways, the most typical causes are soil compaction, root invasion, and the general age of the drainage system. Soil compaction can be caused by large constructions and vehicles operating above the drain field. It is possible that the ensuing weight will crush and shatter crucial subsurface components, preventing any effluent channeling from taking place. The most common source of fractures and gaps in system components, on the other hand, is intrusive roots.

Having an expert inspect the system and assess whether any system components need to be changed is also critical to success.

5 Signs Your Septic Drainfield Has Stopped Working

Unlike municipal septic systems, which consist just of a subterranean tank that collects waste and water, residential septic systems are more complex. Water finally departs the tank through an outlet pipe and into a network of long perforated pipes known as the leech or drainfield after reaching the tank’s interior. The drainfield is equally as vital as, if not more so than, the septic tank in terms of wastewater treatment. In the event that this component of the system begins to fail, prompt action might mean the difference between relatively small repairs and a total drainfield replacement.

  1. Drainage is being slowed.
  2. As long as there is still any water in the pipes of the field, the drains in your home will continue to function, albeit at a slower rate.
  3. The presence of obstructions in the inlet or outlet pipe, as well as several other septic problems that are less difficult to resolve than drainfield problems, might result in delayed drainage.
  4. 2.
  5. You may detect puddles or spongy and mushy ground all over the place if you look closely.
  6. A backup occurs when the water level rises to a level that forces sewage up the input pipe and into the lowest drains in your house, which is known as a back up in the system.
  7. 3.

Drainfield leaks can provide visible consequences on the surface if the drainfield leaks at a higher rate than typical or contains decaying material that is meant to remain in the tank.

Returning Flow is the fourth step.

If you presume that the tank just need pumping, the service technician may discover water and sewage entering the tank from the outlet in a reverse flow, which would indicate that the tank requires more than pumping.

The presence of reverse flow from the drainfield is an obvious indication that you want jetting or pipe replacement services.

The Development of Odors In the end, you can utilize your sense of smell to detect indicators of drainfield issue.

Any sewage or toilet scents, even if they are weak and difficult to detect, signal that you should have a professional evaluate your home immediately.

This is the most effective way.

Whenever we observe a decrease in drainage capacity, we will inform you of the problem and your choices for resolving it before the system stops processing waste altogether.

In addition, we’re pleased to address any of your questions or concerns concerning your drainfield or septic system in general with a professional response.

How Does a Septic System Work?

7th of July, 2020

Did you know?Your septic system is likely the most expensive appliance in your house!

The 7th of July, 2020, is a Saturday.

For Our Water

Septic systems that are not adequately maintained can discharge untreated or partially treated sewage into neighboring streams and rivers, as well as into groundwater. Waste that has not been handled poses a threat to human health and degrades the quality of water. Overabundance of fertilizers and fecal bacteria in Howard County’s streams has caused significant impairment. However, while the majority of Howard County’s Poor and Very Poor grade streams are concentrated in the densely urbanized districts of Ellicott City, Elkridge, and Columbia, there are a few others in Western Howard County that are classified as Very Poor, Poor, or Fair.

For Your Home

Septic systems that are not adequately maintained might experience early failure, resulting in sewage backups in the residence and sluggish drainfields. By taking care of your septic system today, you may reduce the likelihood of having to make a costly repair in the future, saving you money. Depending on the scope of the work required and whether or not there is a suitable place for a second drainfield, system repairs can cost upwards of $50,000. Maintaining the utility of an existing drainfield allows it to last for a longer period of time.

How does a Septic System Work?

Septic systems are decentralized sewage-treatment systems that play a vital role in making your house livable while also preserving the water quality in the surrounding area, according to the EPA. 1. You have flushed something down the toilet. It makes its way to the septic tank, where it sits and separates from the other waste. Essentially, septic systems work on the water in/water out principle; for example, when you flush a gallon of water down the pipes, a gallon of water travels into the drainfield.

  • Hydraulic overload is one of the most prevalent causes of a septic system to fail before its expected time.
  • A large amount of water applied at once causes the scum and sludge layers to get agitated.
  • On the right is a tank that is regularly loaded.
  • Precautions that you can take include:
  • Pipes that are dripping or leaking should be repaired to avoid extra water from entering the sewage system. Water-saving fixtures should be installed in place of older models. Showers, loads of laundry, and dishwashing, for example, should be spaced out across time. Caution should be exercised while using water softeners, since they discharge enormous quantities of backwash into the septic tank. If you use a water softener, be sure your tank and drain field are both large enough.

Toilet paper and garbage decomposes within the tank’s interior. However, many objects that are labeled “flushable” are not, and will remain in the tank until they are removed manually. It is possible for your tank to become clogged if a large number of them accumulate. Precautions that you can take include:

  • Items such as diapers, baby wipes, paper products other than toilet paper, cat litter, cigaretts, coffee grounds, feminine products, and kitchen garbage should not be flushed Do not use a garbage disposal because an excessive amount of organic waste produces an excessive amount of solids, which do not decompose in the septic tank. Using a garbage disposal will increase the frequency with which your tank will need to be pumped. Instead, consider creating a compost pile. Observe a regular maintenance plan and empty your tank as necessary. Solids that will not break down are removed from the tank by pumping it.

Inside the tank, there is naturally-occurring specialist bacteria that lives there and processes the waste, which is beneficial to the environment.

These live microorganisms are required by the septic system. Precautions that you can take include:

  • It is possible to destroy these bacteria by using too much home cleaning or too much salt from a water softener. Flushing solvents, pesticides, herbicides, motor oil, antifreeze, or paint is not recommended.

Keep in mind that anything you flush will ultimately end up in your yard.

2. The wastewater leaves the tank and enters the drainfield.

Wastewater is channeled through perforated pipes that are embedded in the ground. Drainfields can take on a variety of shapes and sizes depending on the soil conditions; in general, they are planted under grass and put into gravelly pits. It’s in this location that wastewater is gently leached out into a yard, where soil continues to filter and clean the effluent. Drainfields rely on a precise balance between soil drainage capability and surface water runoff. Precautions that you can take include:

  • Planting trees near a drainfield is not recommended since their roots are problematic. No vehicles should be driven over or parked on the drainfield (or septic system).
  • The weight of your car might cause pipes to collapse and dirt to compress, resulting in decreased drainage.
  • The formation of biomats surrounding the perforated pipes occurs when a drainfield matures, if an excessive amount of particles is pushed out into the field, or if the drainfield remains too moist. As wastewater is discharged from the septic tank, these biomats form patches of slime that inhibit the drainfield from adequately absorbing the effluent.

A regular schedule of maintenance and treating your septic system well will prolong its life for the betterment of your home and surrounding waterways!

Join us for a future webinar to learn more about the critical function that your septic system plays in making your house habitable while also conserving our waterways. Register today.

Can Anything Unclog an Old Septic Drain Field?

When a drain field is installed, it is intended to allow liquid from a septic tank to sink into the earth. While the solids are dissolving and breaking down in the tank, the liquids are flowing from the tank and via pipes in the drain field, where they are released into the earth through perforations in the pipes. Solids dissolving and breaking down in the tank Due to the accumulation of material in the leach field, it is possible for it to get damaged or blocked over time. It is possible to have difficulties with a full septic tank since it allows solid waste and sludge to overflow into the drain field.

Shock the System With Bacteria

Septic system bacteria packets can assist in clearing blocked drain fields by encouraging waste material to decompose and drain through. This can also aid in the preservation of the health and extension of the life of your system. Bacteria enter the septic system through the toilet bowl, which is flushed every day. Most experts advocate using it once a month, however a greater dose and more frequent treatments may be necessary to cleanse the system first.

Reduce Water Usage

Reduce your water use to allow the drain field to dry up and the entire septic system to recover from its failure. Water conservation will keep a residence from surpassing the capacity of the septic tank and will allow the drain field to dry up more effectively. You may do this by only doing full loads of laundry and washing a full load of dishes at a time, as well as by repairing any leaky faucets or running toilets that may occur.

Avoid Harsh Chemicals

When chemicals are used in a septic tank, they inhibit the digestion of waste by killing the bacteria that aid in the breakdown of solids. Avoid flushing cleansers such as shower, tub, sink, and toilet bowl cleaners, as well as drain-clearing acids, down the toilet or down the sink or the drain. Make use of ecologically friendly cleaning items such as vinegar and baking soda instead of hazardous non-natural chemicals to keep your home clean.

Change to Gentler Toilet Paper and Soap

There are compounds in certain soaps that can interfere with microorganisms that break down sediments in the tank, which might result in difficulties with the drain field. In a septic tank, some varieties of toilet paper do not break down quickly and can add to the accumulation of particles in the tank. Solids breakdown and liquid flow are aided by septic system-friendly soaps and toilet paper, which will aid in the recovery of your drain field and the recovery of your drain field. Also, try to restrict your usage of waste disposal devices.

Coffee grounds and rice, among other solids, do not break down quickly in a septic tank and can contribute to sludge accumulation, which can lead to drain field clogging, among other things.

Contact a Septic Professional

If none of the measures listed above are successful in alleviating your drain field problem, it is possible that roots are infiltrating the pipes of your leach field or that the system is simply too old to function correctly. It is possible that a septic specialist will be required to assess what procedures should be performed.

SEPTIC-TANK DRAIN FIELDS: WHAT YOU SHOULD KNOW ABOUT PROTECTING THEM FROM HARM

While a septic system may appear to be impenetrable, the fact is that neglect may cause severe damage, which may even result in a complete shutdown of the system. Septic systems may give many years of reliable service if properly maintained, but they can also be completely damaged by reckless actions. The drain field is an element of your septic system that is particularly prone to failure. More information on this crucial component, as well as numerous important measures that will help to keep your drain field in good condition, may be found in the sections below.

  1. Generally speaking, a septic drain field is the region where effluents, which are liquid waste products produced by the system, are discharged into the soil, after which the liquid waste products seep through the soils around the area.
  2. From a structural standpoint, drain fields are composed of many parallel pipelines that empties into a particular substrate that is buried several feet beneath the surface.
  3. It is for this reason that being vigilant in protecting the septic drain field is so critical to success.
  4. Because drain fields are so critical to the overall health of a septic system, you must take a proactive approach to prevent them from being damaged or destroyed.
  5. Keep impurities out of the system that might clog it.
  6. Never put grease, oil, or other scum-forming compounds into the septic system in order to avoid this situation from developing.
  7. Instead, direct gray water to a sump pump that will be used solely for disposal.

Drain-field components are often only a few feet below ground level, making them accessible to things that might create a clog or other problems.

Among the other potentially harmful aspects are storage sheds and pavement that is too close to the drain field; anything that creates long-term weight stresses on drain fields should be avoided.

Keep biological activity at a high level.

It is possible to disrupt this activity by killing beneficial microorganisms and cause an imbalance in the environment, which may result in the cessation or reduction in the effectiveness of filtering and cleansing of effluent.

Detergents, pesticides, insecticides, fertilizers, and other potentially toxic compounds are examples of such agents.

On a regular basis, carry out the necessary “upstream” maintenance tasks.

However, even in the absence of dangerous chemicals being introduced into the effluent, the regular processes occurring inside a septic system might eventually result in the closure of drain fields.

Effluent filters, for example, should be cleaned and replaced on a regular basis.

Another important maintenance operation is the pumping out of accumulated sludge that has developed at the tank’s bottom.

Regular pumping of tanks, which may be as often as once a year, is necessary to prevent sludge from departing the tank and contaminating the drain-field lines and causing a backup.

How Much Water Can My Septic System Handle?

Jones PlumbingSeptic Tank Service hears two typical queries from customers:How long does a sewage system last? andHow much does a septic system cost. And, what is the capacity of my septic tank? The short and long answers are both: it depends on the situation. The amount of water you and others in your household consume on a daily basis has a significant impact on the answers to these questions.

How A Septic Tank Moves Water

Jones PlumbingSeptic Tank Service hears two typical queries from customers:How long does a septic system last? andHow much money does a septic system cost. What is the capacity of my septic tank? What is the short and lengthy answer? It is dependent on the circumstance. Answering these questions will be influenced greatly by how much water you and others in your household use each day.

How Many People Can A Septic Tank Handle?

It all boils down to how much water you use on a daily basis. Typical domestic water storage tanks have capacities that range from 750 gallons to 1,250 gallons, with the average individual using between 60 and 70 gallons of water each day. Specifically, when septic systems and tanks are constructed, contractors typically pick plumbing hardware based on the size of the home. This is a concern because Following an aseptic tank assessment, Jones PlumbingSeptic Tank Service can establish the suitable volume of your septic tank.

3 Tips For Caring For Your Septic System

Living with an aseptic tank is not difficult or time-consuming, but it does need preparation and patience in order to reap the benefits of the system’s full lifespan. To help you maintain your septic system, Jones PlumbingSeptic Tank Service has provided three suggestions.

1. Understand How Much Water Your Daily Activities Use

While older fixtures consume more water than modern, high-efficiency fittings, many homes have a blend of the two types of fixtures in place. Assume that old vs new water-appliances and fixtures consume approximately the same amount of water, based on the following calculations.

  • 1.5 to 2.2 gallons per minute for bathroom sinks, 4–6 gallons each cycle for dishwashers, and 2–5 gallon per minute for kitchen sinks are recommended.
  • For example, showers use 2.1 gallons per minute, or 17.2 gallons per shower
  • Toilets use 1.28 gallons to 7 gallons every flush
  • Washing machines use 15 gallons to 45 gallons per load
  • And sinks use a total of 2.1 gallons per minute.

2. Set Up A Laundry Plan

Scheduling numerous loads over the course of a week is beneficial to the aseptic tank. Washing bedding and clothing in batches allows you to get other home duties done while you wash. Solids have time to settle and water has time to filter out in your septic tank system if you spread your water use over many days.

3. Fix Leaky FaucetsFixtures

Did you know that a running toilet may waste as much as 200 gallons of water each day if left unattended? It is possible that the sheer volume of water will produce too much water in the septic system, resulting in other problems like standing water in the yard.

Schedule Professional Septic System Care

Have you noticed that your drains are backing up in your home? Alternatively, are damp patches emerging in your yard? If this is the case, it is time to contact Jones PlumbingSeptic Tank Service to arrange for septic tank services. While most septic tanks are capable of handling a significant volume of water, they can get overwhelmed, resulting in painful consequences. To arrange an appointment with us if your system is having difficulty keeping up with household demand or if you believe it is time for a septic tank cleaning, please call us now.

5 Things Homeowners Should Know About Their Septic Drain Field

There are certain distinctions in care, usage, and budgeting that you should be aware of, whether you’re a new homeowner with an existing septic system or considering about purchasing or building a home without sewer hookups. This document outlines three ways in which your budget will be affected if your wastewater is treated using a septic system. 1. You will not be required to budget for municipal sewer service. Because the municipal wastewater system normally processes all of the water, the cost of city sewage service is sometimes determined by how much water you purchase from the city.

  • A large number of homes with septic systems also rely on wells for fresh water rather than municipal water, which means you’ll likely save money in that department as well.
  • It is necessary to include septic maintenance in your budget.
  • Although you are not required to pay the city for the usage of your septic system, you will be responsible for the costs of maintenance if you want the system to continue to function properly.
  • It is possible that these maintenance and repair expenditures will build up over time, so you may want to consider setting up an emergency fund to cover any unforeseen repair bills.
  • You’ll also need to budget for the cost of a single inspection and begin saving for the cost of a tank pump.
  • Spreading the expenditures out over several months is the most effective budgeting strategy, even for an expense such as tank pumping that does not occur every year, because it allows you to better estimate the costs ahead of time.
  • You may need to set aside money for septic tank replacement.

The tank and leach field may not need to be replaced if you have a reasonably recent septic system and plan to sell your home within a few years.

If, on the other hand, your home’s septic system is more than a decade old, you’ll want to start looking into how much a new system would cost you as soon as possible.

For example, if the previous owners did not do routine maintenance or if the system was installed on clay soil, the system may need to be replaced.

It is a prudent decision to begin putting money aside in anticipation of this eventuality.

When you have a septic system, you may use these three strategies to budget differently.

Make an appointment with us right away if you’re searching for someone to pump out your septic tank or to complete an annual examination of your septic system. Our experts at C.E. Taylor and Son Inc. would be happy to assist you with any septic system assessment, maintenance, or repair needs.

How Often Are Septic Tanks Emptied, and Where Do the Contents Go?

It’s safe to assume that wherever there are many individuals who run their houses’ waste systems through septic tanks, there will be a slew of local firms that specialize in eliminating the scum and sludge that collect in the tank over a long period of time. This is a crucial service because, if too much sludge accumulates over time, it can cause overflow, which is harmful to everyone involved. Septic pumping for commercial purposes typically consists of a pump truck emptying the sludge, effluent, and scum from the tank and leaving the tank empty and ready to be refilled with fresh sludge and water.

  1. Prior to the passage of federal legislation prohibiting the disposal of sewage sludge, waste management businesses could simply bury it in landfills.
  2. These locations still exist, however many of them are in the process of being cleaned up (clean-up).
  3. In certain situations, the septic contents are transported to waste treatment plants where they are combined with the stew that has been pumped in from a municipal sewer system, or they are supplied to for-profit organizations that specialize in the treatment of septage.
  4. Septage may also be placed at landfills that have been allowed.
  5. Because of the difficulties associated with properly disposing of your septic tank’s contents, septage is sometimes employed in a different way: to grow food.
  6. This application of septage has the potential to be contentious.
  7. It is expected that, when properly applied to farmland with good soil and a low water table, the soil will work as a filter in the same way as a drain field in the rear of a home with a septic tank will act as a filter.
  8. Historically, it has been recognized that methane, which is created as a waste product during the breakdown of sewage, may be utilized to generate energy.
  9. In addition, because the power produced does not burn, there is little or no pollutants emitted.
  10. One system, constructed south of Seattle, Washington, in 2004, has the capacity to generate enough electricity to power 1,000 houses.

Who would have thought that your feces could be so beneficial? More information about waste treatment may be found on the next page. The original publication date was July 29, 2008.

How Does a Septic Tank Work?

Mr. Fix-It-Up-For-The-Family You may save a lot of money if you understand how a sewage treatment system works—and what can go wrong—so that you can handle your own septic system maintenance.

How does a septic tank work?

Pumping the tank on a regular basis eliminates sludge and scum, which helps to keep a septic system in good working order. It is possible for a well-designed and well built septic system to last for decades, or it might collapse in a matter of years. It is entirely up to you as long as you can answer the question of how do septic tanks function. Healthy septic systems are very inexpensive to maintain, but digging up and replacing a septic system that has completely collapsed may easily cost tens of thousands in labor and material costs.

It’s critical to understand how a septic tank works in order to maintain one.

Let’s take a look below ground and observe what happens in a properly operating septic system, shall we?

Understand that a septic system is a cafeteria for bacteria

Bacteria are responsible for the proper operation of a septic system. They decompose garbage, resulting in water that is clean enough to safely trickle down into the earth’s surface. The entire system is set up to keep bacteria healthy and busy at all times. Some of them reside in the tank, but the majority of them are found in the drain field. 1. The septic tank is the final destination for all waste. 2. The majority of the tank is filled with watery waste, referred to as “effluent.” Anaerobic bacteria begin to break down the organic matter in the effluent as soon as it enters the system.

  • A layer of sludge settles to the bottom of the container.
  • 4.
  • Scum is mostly constituted of fats, greases, and oils, among other substances.
  • Grease and oils float to the surface of the water.
  • (5) A filter stops the majority of particles from reaching the exit pipe.
  • The effluent is discharged into the drain field.
  • Effluent is allowed to leak into the surrounding gravel because of holes in the drain septic field pipe.
  • The garbage is completely decomposed by aerobic bacteria found in gravel and dirt.
  • Potable water seeps into the groundwater and aquifer system from the surface.

Septic Tank Clean Out: Don’t abuse the system

Septic systems that have been correctly planned and constructed require just occasional ‘pumping’ to remove the sludge and scum that has built up inside the tank.

However, if you don’t understand how a septic tank works, you may unintentionally hurt or even destroy the system.

  • Drains are used to dispose of waste that decomposes slowly (or not at all). Cigarette butts, diapers, and coffee grounds are all known to cause issues. Garbage disposers, if utilized excessively, can introduce an excessive amount of solid waste into the system. Lint from synthetic fibers is emitted from washing machine lint traps. This substance is not degraded by bacteria in the tank and drain septic field. Bacteria are killed by chemicals found in the home, such as disinfecting cleansers and antibacterial soaps. The majority of systems are capable of withstanding limited usage of these goods, but the less you use them, the better. When a large amount of wastewater is produced in a short period of time, the tank is flushed away too quickly. When there is too much sludge, bacteria’s capacity to break down waste is reduced. Sludge can also overflow into the drain field if there is too much of it. Sludge or scum obstructs the flow of water via a pipe. It is possible for tree and shrub roots to obstruct and cause harm to a drain field. Compacted soil and gravel prevent wastewater from seeping into the ground and deprive germs of oxygen. Most of the time, this is caused by vehicles driving or parking on the drain field.

Get your tank pumped…

Your tank must be emptied on a regular basis by a professional. Pumping eliminates the accumulation of sludge and scum that has accumulated in the tank, which has caused the bacterial action to be slowed. If you have a large tank, it may be necessary to pump it once a year; but, depending on the size of your tank and the quantity of waste you send through the system, you may go two or three years between pumpings. Inquire with your inspector about an approximate guideline for how frequently your tank should be pumped.

…but don’t hire a pumper until you need it

Inspections and pumping should be performed on a regular basis. However, if you’re not afraid of getting your hands dirty, you may verify the sludge level yourself with a gadget known as The Sludge Judge. It ranges in price from $100 to $125 and is commonly accessible on the internet. Once you’ve verified that your tank is one-third full with sludge, you should contact a professional to come out and pump it out completely.

Install an effluent filter in your septic system

Garbage from your home accumulates into three distinct strata. The septic filter is responsible for preventing blockage of the drain field pipes.

Septic tank filter close-up

The septic tank filter is responsible for capturing suspended particles that may otherwise block the drain field pipes. Obtain an effluent filter for your tank from your contractor and place it on the outflow pipe of your tank. (It will most likely cost between $50 and $100, plus labor.) This device, which helps to prevent sediments from entering the drain field, will need to be cleaned out on a regular basis by a contractor to maintain its effectiveness.

Solution for a clogged septic system

If your septic system becomes clogged and you find yourself having to clean the filter on a regular basis, you might be tempted to simply remove the filter altogether. Hold on to it. Solids, wastewater, and scum are separated into three levels in septic tanks, which allows them to function properly (see illustration above). Solids sink to the bottom of the container, where microbes breakdown them. The scum, which is made up of trash that is lighter than water, rises to the surface. In the drainage field, the middle layer of effluent leaves the tank and goes through an underground network of perforated pipes to the drainage field.

  1. Keep the effluent filter in place since it is required by your state’s health law.
  2. Waste particles might flow through the filter and clog the perforated pipes if the filter is not used.
  3. Your filter, on the other hand, should not require cleaning every six months.
  4. A good chance is high that you’re flushing filter-clogging things down the toilet, such as grease, fat, or food scraps.
  5. A garbage disposal will not be able to break down food particles sufficiently to allow them to flow through the septic tank filtration system.
  6. Plastic items, disposable diapers, paper towels, nonbiodegradable goods, and tobacco products will clog the system if they are flushed through it.

For additional information on what should and should not be flushed down the toilet, contact your local health authority. More information on removing lint from your laundry may be found here.

Get an inspection

Following a comprehensive first check performed by an expert, regular inspections will cost less than $100 each inspection for the next year. Your professional will be able to inform you how often you should get your system inspected as well as how a septic tank functions. As straightforward as a septic system appears, determining its overall condition necessitates the services of a professional. There are a plethora of contractors who would gladly pump the sludge out of your tank, but many, in my experience, are unable to explain how a septic system works or how it should be maintained.

A certification scheme for septic contractors has been established in certain states; check with your state’s Secretary of State’s office to see whether yours is one of them.

Also, a qualified inspector will be able to tell you whether or not your tank is large enough to accommodate your household’s needs, as well as the maximum amount of water that can be passed through it in a single day.

As you learn more about how a septic tank works, your professional should be able to tell you whether or not your system will benefit from this treatment.

Alternatives to a new drain field

Regular inspections will cost less than $100 apiece once the initial comprehensive examination by a professional has been completed. It will be possible to learn how a septic tank works from your professional if you have a better understanding of how your system operates. No matter how simple it appears to be, assessing the condition of a septic system requires the expertise of a professional. There are a plethora of contractors who would gladly pump the sludge out of your tank, but many, in my experience, are unable to explain how a septic system works or how it should be maintained properly.

A certification scheme for septic contractors has been established in certain states; check with your state’s Secretary of State’s office to see whether your state is one of them.

Also, a qualified inspector will be able to tell you whether or not your tank is large enough to accommodate your household’s needs, as well as the maximum amount of water that can be passed through it in a single day.

A product such as RID-X, which contains microorganisms, may be able to help you enhance the operation of your system. As you learn how a septic tank works, your professional should be able to tell you whether or not your system will benefit from this treatment.

  • Pipes should be cleaned. A rotating pressure washer, used by a contractor, may be used to clean out the drain septic field pipes. The cost of “jetting” the pipes is generally around $200. Chemicals should be used to clean the system. A commercial solution (not a home-made one) that enhances the quantity of oxygen in the drain field should be discussed with your contractor before installing your new system. Septic-Scrub is a product that I suggest. A normal treatment will cost between $500 and $1,000. Make the soil more pliable. The practice of “terra-lifting,” which involves pumping high-pressure air into several spots surrounding the drain field, is authorized in some regions. Some contractors use it to shatter compacted dirt around the pipes. Depending on the circumstances, this might cost less than $1,000 or as much as $4,000 or more.

Protect your drain septic field from lint

When this device is in place, it inhibits lint from entering the system, especially synthetic fibers that bacteria are unable to digest. One of these filters, which I’ve designed and termed theSeptic Protector, was invented by me. An additional filter is included in the price of around $150 plus delivery. Learn more about how to filter out laundry lint in this article.

Don’t overload the septic system

Reduce the amount of water you use. The volume of water that flows into your tank, particularly over a short period of time, can be reduced to avoid untreated waste from being flushed into your drain field. Replace outdated toilets with low-flow ones, install low-flow showerheads, and, perhaps most importantly, wash laundry throughout the week rather than just on Saturday mornings to save water.

Meet the Expert

Septic systems, according to Jim vonMeier, are the solution to America’s water deficit because they supply cleaned water to depleted aquifers, according to vonMeier. He travels the country lobbying for septic systems, giving lectures, and giving testimony. For septic system inquiries, as well as information on the operation of the septic tank, contact him by email.

Septic System Frequently Asked Questions

A septic system, sometimes known as a septic tank, is an underground system that processes the sewage that flows from your house before disposing of the treated, cleaner water. Septic systems are typically seen in residential areas. The treated water is subsequently re-introduced into the environment through filtration. This is critical because untreated sewage may harm nearby streams and water systems, as well as the soil around the perimeter of your septic system. Because your septic system is designed to cleanse and filter sewage, it is critical that it is in proper operating order.

What is a Drainfield?

One type of underground sewage treatment system, generally known as an aeration tank or septic system, is one that processes the sewage from your home before disposing of the treated, cleaner water. It is then filtered back into the environment, where it is used to treat water. This is critical because untreated sewage may harm nearby rivers and water systems, as well as the soil around the location of your septic system. Because your septic system is designed to cleanse and filter sewage, it is critical that it is in proper operating order.

How do I find my septic system?

If you’re fortunate enough to have a contemporary septic system in your yard, it may be equipped with an access lid that is visible from the ground floor. If this is the situation at your residence, locating your septic system is as simple as taking a few steps into your backyard. It’s unfortunate that this isn’t true for older septic systems. It’s possible that you may locate an older system in your home by checking for greener, faster-growing grass or even an area with less growth than the rest of your yard if you live in an older home.

This will show you exactly where your septic system is located in your yard, if you have one.

You’ll need to look for the location where your septic system’s sanitary line exits your home and follow that line until you find your septic tank, which will take some time.

If everything else fails, contact a septic installation company. If you are unable to discover your septic system, your yard may need to be dug up by a septic system installation in order to locate your septic tank as a last option.

How long do septic systems last?

Septic systems are not designed to endure for a specific number of years, thus there is no defined time frame. If properly maintained, you may look forward to having your septic system around for decades without having to worry about replacing it, but if your septic system malfunctions or deteriorates due to inadequate care, its lifespan is substantially limited. In order to obtain an accurate estimate of how much longer the life of your septic system may be extended, you must first have it checked thoroughly by an experienced septic system installation or repairer.

What’s the advantage of installing a newer septic system rather than an older system?

Although it is not required to install a new system, there are advantages to having a modern septic tank rather than an older one. For starters, when you get a new septic tank, you can be confident that it will serve you for decades if it is properly maintained, and you will not have to worry about it being “too old.” Additionally, newer systems have been modified to reduce the likelihood of your system becoming clogged, and if something does go wrong with a new system or when it comes time to have your septic system pumped, a new system will likely be easier to locate because they are frequently constructed with ground-level lids.

New septic systems also provide a further treatment for your waste water, allowing it to be cleaner before it is released into the surrounding environment.

How much does a new septic system cost?

Installation of new septic systems may be a significant financial commitment, with costs typically reaching tens of thousands of dollars. Whenever you have to replace an outdated septic system, you should look into financing alternatives that will make it simpler for you to pay for a new septic system in the long run. Purchase further information from a septic system installation business on how to obtain septic systems at the most competitive prices while also taking advantage of low-interest financing options.

How big is my septic tank?

Septic tank capacity is determined by the amount of water consumed in your property as well as local codes and requirements. Check with your local health agency to find out how big your tank is before installing it.

Why should my septic system be pumped out?

Without regular pumping, the gases emitted by human waste accumulate in your septic system, increasing the risk of septic tank damage and the need for more frequent pumping. The regular pumping of your septic system will allow you to limit the rate at which your tank deteriorates and save money in the process. It’s crucial to remember, though, that degeneration is unavoidable in the long run.

It is only via regular maintenance, such as pumping your tank, that your septic system will survive longer. It is recommended that you pump your septic system around once every 2-3 years if you want to prevent having to pay for a whole new tank.

Does my tank need to be dug up to know if it needs to be pumped?

Risers are commonly found in newer septic systems, which allow you to access your tank from the ground level through a lid. It is straightforward for any septic system professional to determine whether or not your yard has risers placed, and whether or not it is necessary to pump it. If, on the other hand, your tank cannot be accessible from the ground level, it will need to be dug up in order to determine whether it has to be drained. Instead of inspecting your septic system to see whether it needs to be pumped on a regular basis, set a timetable for having your system pumped every 2-3 years.

Why should I have risers and lids installed on my septic system?

As a result, when it comes time to find, pump, or repair your septic system, risers are the best choice since they provide ground-level access to your system. Having a septic system lid will allow you to mow your grass while still being able to find your system with no difficulty. Lids and risers also have the advantage of being accessible all year round, as opposed to earlier septic systems that could only be accessed by digging a trench through your yard. If your septic system has to be pumped or repaired for any reason during the winter months, getting beneath layers of frozen earth can be difficult, if not impossible, and you may be forced to wait until the spring to have access to your tank again.

How often should my septic system be pumped out?

A typical septic system contains a 1,500-gallon tank, which needs to be pumped around every 2-3 years for a household of four, according to industry standards. If you have less than four people living in your house, you will most likely be able to pump your septic system every five years rather than every three. You should speak with your local health agency to determine the exact size of your tank, and you should consult a septic system business to determine how frequently your tank should be pumped based on the size of your family and the size of your septic tank.

Do I need to have the septic tank pumped if I’m selling my house?

Consult with your local health department to learn about the restrictions that apply to your region of residence. Generally speaking, as long as your septic system has been pumped on a regular basis by a licensed septic system company and recently enough for the new homeowners to be able to live there for a year or two without having to pump the septic system, you should not be required to have it pumped again in the near future.

How do I find someone to pump my septic system?

It is important to be aware that not all septic system businesses are licensed and that not all firms properly dispose of or recycle the waste they pump from your septic system when you are looking for one to pump it. Finding a firm that complies with EPA standards should be your first concern, and then you should look at price, how pricing is split down, and which company is delivering the most honest, economical, and dependable service should be your next consideration. Investigate business evaluations, and when you select a septic system provider to pump your septic tank, be certain that they do the work properly, leaving enough water and waste to keep the sewage decomposing while leaving no visible trace more than a few inches of waste behind.

You may obtain a list of qualified pumpers by contacting your local health department or by searching online for septic pumpers that have websites that clearly show their certificates and qualifications.

How much does it cost to have my septic system pumped?

It is recommended that you call many pumpers before making a selection, and that you ask as many questions as possible to ensure that you are receiving the best service for your money. Pumping may cost upwards of $200, so it is always wise to shop around before making a decision. You should not consider it a waste of money to have your septic system pumped when the time comes. By correctly maintaining your septic system, you may avoid spending tens of thousands of dollars to replace your septic system long before it should have been replaced in the first place.

What happens if I don’t have my septic system pumped?

The sediments will pile up in your septic tank if you don’t pump it out regularly, ultimately overflowing into the drain field and clogging the drain field. Backups can occur, causing damage to your property and even necessitating the replacement of your drain field, which can be a very expensive error.

I just had my septic system pumped. Why is it full already?

Septic systems are designed to refill rapidly since the purpose of pumping is not to remove water but rather to remove non-biodegradable waste, and the water itself is not the aim of pumping. Once your septic system has been pumped and you begin to use the water in your house, your tank will quickly refill in order to maintain good operation of the system. If the water level rises to a point where it is above the outlet line, contact your septic system service provider for assistance immediately.

What do you look for when inspecting my septic system?

When we do an inspection, we make certain that your septic system is in good operating condition and that it satisfies the standards for receiving a Certificate of Compliance. If you’re planning to sell your home, you should have your septic system checked out by a professional who is certified by the Minnesota Pollution Control Agency. This will allow you to sell your home faster and for more money, if you can prove that your system has been checked out by an accredited professional. The level of liquid in your septic tank will be checked, and we’ll make sure there is no surface-level discharge.

The drains in my home aren’t draining as quickly as they normally do. Does this have to do with my septic system?

Drains that are clogged and that empty slowly are not necessarily a big source of concern. Before presuming that there is an issue with your septic system, check sure that there isn’t anything obstructing your drain first. In the case of one plumbing fixture in your house that is draining slowly, it is likely due to clogging; however, if all of the drains in your home are slow or leave waste backed up, it is probable that your septic system requires inspection and may even require pumping.

What happens when my septic system fails?

Blockages in drains that are only partially or completely emptying are not typically a big source of concern for homeowners. Make sure there isn’t anything blocking your drain before concluding that there is an issue with your septic system first.

In the case of one plumbing fixture in your house that is draining slowly, it is likely due to clogging; however, if all of the drains in your home are slow or leave waste backed up, it is probable that your septic system requires inspection and maybe pumping.

How do I prevent my septic system from failing? How can I properly maintain my septic system?

Your septic system should degrade at a normal rate over the course of several decades if you maintain it on a regular basis. Maintenance normally consists of getting your septic system pumped on a regular basis and making certain that you do not flush or wash anything down the drain that might block your septic system.

What shouldn’t I flush down the toilet?

As a general rule, only human waste and toilet paper should be flushed. There are several reasons why flushing medicine down the toilet is not a good idea. First, medication might kill some of the bacteria in your septic tank, which is necessary to break down solid waste. Second, drugs can pollute adjacent well water. In addition, you should avoid flushing feminine hygiene items, paper towels, tissues, hair, cat litter (even if it is flushable), diapers, wipes, condoms, cigarettes, and anything else that seems to be inorganic and shouldn’t be flushed down the toilet.

What shouldn’t I pour down the drain?

Human waste and toilet paper should be the only items flushed, as a general rule of thumb It is never a good idea to flush medicine down the toilet since medication will kill some of the bacteria in your septic tank, which is necessary for the breakdown of solid waste, and drugs can pollute adjacent well water. In addition, you should avoid flushing feminine hygiene items, paper towels, tissues, hair, cat litter (even if it is flushable), diapers, wipes, condoms, cigarettes, and anything else that seems to be inorganic and shouldn’t be flushed.

Is using a garbage disposal bad for my septic system?

Using a trash disposal will result in the requirement to pump your septic system more frequently than you would otherwise need to do if you avoided flushing food particles down your drains. Too much food collection in your tank might cause your drainfield to clog since the microorganisms in your tank are not capable to digesting it. When using a trash disposal, check with your septic system company to find out how frequently the disposal should be serviced.

Should I add bacteria to my septic system?

Aside from being completely useless, introducing bacteria to your septic tank is also highly discouraged. The bacteria produced by human waste is sufficient to break down the solid sewage in your tank without the need of bacteria supplements or other methods. If, on the other hand, multiple members of your home are using pharmaceuticals, they will enter your septic system through human waste and kill some of the beneficial bacteria in your tank, causing it to malfunction. Please contact the firm who installed your septic system to see whether or not you should be worried about the amount of bacteria-killing compounds entering the system.

There’s a strong sewer odor outside of my house. Could this be my septic tank?

Strong sewage stench coming from your yard might be coming from your septic system, but it could also be coming from someplace else completely. Identifying the source of the smell is important. Check for propane or gas leaks in your home before concluding that your septic system is at fault; however, if your gas or propane lines are not leaking, determine how long it has been since you had your tank pumped, and whether there is any sewage waste in your yard or other signs of septic system failure before making your final decision.

Can my septic system contaminate nearby water?

It is possible for your septic system to pollute surrounding water sources if it is not properly managed or fails completely. In the event that you suspect that your septic system is failing, make sure that it is routinely pumped and inspected by an expert.

My gutters’ downspouts drain into my yard above my septic system. Is this a bad thing?

It is possible for your septic system to pollute surrounding water sources if it is not properly maintained or when it malfunctions. As a precaution, get your septic system drained and examined as soon as you see any indicators of septic system failure.

Leave a Comment

Your email address will not be published. Required fields are marked *