How Big Is The Septic Tank In My Yard? (TOP 5 Tips)

They are typically rectangular in shape and measure approximately 5 feet by 8 feet. In most cases, the septic tank is buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter.

flohawks.com

  • As outlined above, septic tanks have to be at least five feet from the house, but most are generally in the 10- to 25-foot range. When you don’t feel like probing around your yard, you can always check out the county records for your house.

How do I find out the size of my septic tank?

One way to find out the size of your septic tank is through records kept from when the tank was installed. These records could be with the previous owner of your home. Another way to identify the tank size is to talk with the last company that serviced/pumped your tank.

How big is a septic tank usually?

Most residential septic tanks range in size from 750 gallons to 1,250 gallons. An average 3-bedroom home, less than 2500 square feet will probably require a 1000 gallon tank. Of course, all of this depends on the number of people living in the home and the amount of water and waste that will be put into the system.

How do I find out where my septic tank is located?

Probe about every two feet. Most septic tanks are around 10-25 feet away from your home, and cannot be closer than five feet. Once you feel the probe striking flat concrete, fiberglass or polyethylene, you will have located your tank.

How often does a 1000 gallon septic tank need to be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

How deep should a septic tank be?

Septic tanks are typically rectangular in shape and measure approximately 5 feet by 8 feet. In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground.

How often should a septic tank be pumped?

Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  • Your Drains Are Taking Forever.
  • Standing Water Over Your Septic Tank.
  • Bad Smells Coming From Your Yard.
  • You Hear Gurgling Water.
  • You Have A Sewage Backup.
  • How often should you empty your septic tank?

What happens if septic tank not pumped?

What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

Can I shower if my septic tank is full?

Only the water would get out into the leach field in a proper system unless you run too much water too fast. The thing to do is to run your shower water outside into it’s own drain area, but it may not be allowed where you are. Used to be called gray water system.

Is Ridex good for septic tanks?

How additives, like Rid-x, interfere with your septic system’s eco-system. According to the EPA and the Ohio Department of Health, not only are additives like Rid-X not recommended, but they actually have a detrimental and potentially hazardous effect on your septic system’s waste treatment process.

What to do after septic is pumped?

After you have had your septic tank pumped by a trusted septic company, there are some things you can and should do as the septic system owner.

  1. 1) Get on a Schedule.
  2. 2) Take Care of the System.
  3. 3) Know the Parts of Your System.
  4. 4) Check Other Possible Issues.

Septic systems: How big should my drainage field be?

What every homeowner who is considering building a septic system must consider is the amount of land they need to dedicate to septic field, which is where liquid waste will eventually be discharged into the soil. Even in the country, yard space is valuable, and you don’t want to give it up to a field that’s too large for your requirements or to a neighbor’s livestock. This is especially true when you consider the fact that once the field is in, you won’t be able to utilize that area for anything else in the future.

However, if you make your field too tiny, you’ll have a lot of headaches.

Who has a need for that?

But keep in mind that this is just a rough estimate.

  • The two most important elements to consider are, first, the amount of trash you intend to send through the system, and, second, the quality of the soil in the drainage field, both of which are vital.
  • If the soil has good percolation conditions—for example, if it’s comparably sandy and waste water seeps down with little resistance—a seepage field of 4,500 square feet (for example, 100 feet long and 45 feet wide) is appropriate for a three-bedroom house with regular waste production.
  • Figure 9,000 square feet, which is a significant change.
  • The percolation rate of waste water is quicker in hotter regions.
  • It will be up to your contractor to select how much larger it will be.
  • When deciding where you want your septic system to be installed in your yard, you need take your local zoning law into consideration.
  • It can be as much as 100 feet or more in extreme circumstances.
  • According to others, it should be located as near to the home as feasible.

But some believe that the system should be located as far away from the building as possible, in an open area where it will be simpler to reach in the event of a crisis.

How To Find Septic Tank Location: A Guide for Property Owners

The majority of individuals prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank could be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.

Follow the Main Sewer Line

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your property. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about down there. Look for a pipe with a diameter of around four inches that is leading away from your home or building. Keep a note of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your home.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may have to probe a bit further out before striking the tank.

Inspect Your Property

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your yard. Find the main sewer line that leads to your septic tank by going to your basement or crawl space and digging around in it. Look for a pipe with a diameter of approximately four inches that is leading away from your home or business. Recall where your sewer pipe is located, as well as where it exits your home, in order to locate it when you are out in the field.

If you have a drain snake, you can use it to try to follow the approximate route of the pipes in your house.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may need to probe a little further out before hitting the tank.

  • Paved surfaces
  • Unique landscaping
  • Your water well, if you have one
  • And other features.

If you are still having trouble locating your septic system, you might inquire of your neighbors about the location of their septic tank on their land. Finding out how far away their septic systems are will help you figure out where yours might be hidden in your yard or garden.

Check the Property Records

Are you unsure about how to obtain this? Simply contact your county’s health department for further information. Check with your local health agency to see if they have a property survey map and a septic tank map that you can borrow. Perhaps you will be shocked to learn that there are a variety of options to obtain information about your property without ever leaving the comfort of your own residence. Building permits, for example, are frequently found in county records, and they may provide schematics with specifications on how far away from a septic tank a home should be, as well as other important information such as the size of the tank.

Most counties, on the other hand, keep records of septic tank installations for every address. For further information on the placement of your septic tank, you can consult your home inspection documents or the deed to the property.

Don’t Try to Fix Septic Tank Issues Yourself

Septic tank problems should be left to the specialists. The Original Plumber can do routine maintenance on your septic tank and examine any problems you may have once you’ve located the tank. It is not recommended to open the septic tank lid since poisonous vapors might cause major health problems. Getting trapped in an open septic tank might result in serious injury or death. While it is beneficial to know where your septic tank is located, it is also beneficial to be aware of the potential health dangers associated with opening the tank.

Schedule Septic Tank Maintenance

The maintenance of your septic tank on a regular basis helps to avoid sewer backups and costly repairs to your sewer system. You should plan to have your septic tank pumped out every three to five years, depending on the size of your tank and the number of people that reside in your home. The Original Plumber offers professional septic tank and drain field maintenance and repair services at competitive prices. While it is important to know where the septic tank is located, it is not required.

Metropolitan Atlanta and the surrounding areas receive high-quality service from us.

When you require emergency sewer services, we are here to assist you.

Frequently Asked Questions

A septic system is a system for the management of wastewater. Simply put, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home. Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will fall to the bottom of the tank and the liquids will run out onto your leach field.

How do I know if I have a septic tank?

Even if there are no obvious signs of a septic tank in your yard – such as uneven landscaping – there are a few techniques to assess whether or not your home is equipped with an onsite sewage system. Checking your property records is the most reliable technique to ensure that you are utilizing the correct system. When you acquired your house, you should have received a copy of the septic system map with the property documents as well. Checking your electricity statement is another way to determine this.

If you’re also using well water, it’s possible that you won’t receive one at all.

What do I do once I locate my septic tank?

Once you’ve discovered where your septic tank is, there are a few things you should do. It is critical to clearly mark the position of your septic tank. With our inspection, pumping, and repair services, you can save time whether you need a sewer line cleanout or a septic tank maintenance job completed quickly. Make a note of the location of your tank so that you can find it again if necessary. It should be heavy enough so that it does not fly away in windy conditions. A creative approach to accomplish this without having an unattractive flag or marking in your yard is to use garden décor or a potted plant.

This way, you’ll have it for future reference and will be able to quickly locate the exact position if necessary.

Then contact The Original Plumber to have your septic system maintained on a regular basis. Preventing worse problems and the need for costly repairs down the line may be accomplished via proper septic system maintenance. All of the heavy lifting has been delegated to our team of professionals.

How To Find My Septic Tank

  1. What is a septic tank
  2. How do I know if I have a septic tank
  3. And how do I know if I have a septic tank Identifying the location of your septic tank is critical for several reasons. The Best Way to Find a Septic Tank
  4. What to Do Once You’ve Discovered Your Septic Tank

You may have fallen in love with your new house because of its appealing good looks and characteristics, but there is almost certainly more to your new home than meets the eye. In many cases, the characteristics that make your house run more effectively and allow you to live a pleasant, contemporary life are not readily apparent. Septic tanks, for example, are an important part of your home’s infrastructure. A septic system is responsible for regulating and managing the wastewater generated by your home.

  • “How can I locate my septic tank?” is one of the most often requested inquiries we receive.
  • When your tank’s lid is difficult to locate – especially if you are not the original homeowner – you may be at a loss for what to do or where to look for the lid when you need it.
  • The majority of the time, all of the components of the septic tank are buried between four inches and four feet below ground level.
  • In order to do so, it is necessary to first comprehend the functions of septic tanks and septic systems and why it is important to know where yours is located.
See also:  How To Become A Certified Septic Tank Installer In Lowa?

How to Locate Your Septic Tank

Your septic tank’s location is not a closely guarded secret. There will be a method for you to locate it and make a note of its position for future reference, and below are a few examples of such methods.

What Is a Septic Tank?

Having a functioning septic tank is an important aspect of having an effective septic system. In the United States, around 20% of households utilize a septic system to handle their wastewater. Houses in rural parts of New England are the most likely to have a septic system, with residences in the Eastern United States being the most prevalent location for septic systems. When there are few and far between residences, it is typically more efficient and cost-effective to employ a septic system to manage wastewater rather than relying on a public sewage system to handle waste water.

Typically, a septic tank is a container that is waterproof and composed of a material such as concrete, polyethylene, fiberglass, or a combination of these.

An important function of a septic tank is to hold on to wastewater until any particulates in the water separate themselves from the water.

Any liquid that remains in the tank eventually drains into a leach field or a drainfield, where it is known as “effluent.” The dirt in the leach field aids in the filtering of the water and the removal of bacteria, viruses, and other pollutants that may be present in it.

Septic tanks erected in Onondaga County must contain input and outlet baffles, as well as an effluent filter or sanitary tees, in order to effectively separate particles from liquids during the treatment process.

How Do I Know If I Have a Septic Tank?

What is the best way to tell if your home has a septic tank? There are generally a few of different methods to tell. Examining your water bill might help you identify whether or not your house is served by a septic system or is part of the public sewage system in your neighborhood. If you have a septic system for wastewater management, you are likely to receive a charge from the utility provider for wastewater or sewer services of zero dollars. In the case of those who are fortunate enough to have a septic system, it is likely that they may not receive any water bills at all.

  1. A lack of a meter on the water line that enters your property is typically indicative of the fact that you are utilizing well water rather than public utility water, according to the National Association of Realtors.
  2. A septic system is likely to be installed in your home if you reside in a rather rural location.
  3. Septic systems are likely to be installed in all of these buildings, which means your home is likely to be as well.
  4. When a septic tank is present, it is common to find a mound or tiny hill on the property that is not a natural structure.
  5. Checking your property records is a foolproof method of determining whether or not your home is equipped with a septic system.

Why It’s Important to Know the Location of Your Septic Tank

You might wonder why you should bother trying to discover out where your septic tank is. There are several important reasons for this:

1. To Be Able to Care for It Properly

The first reason you should try to locate your septic tank is that knowing where it is will help you to properly repair and care for it in the future. The standard guideline is to avoid erecting structures or placing heavy objects on top of the septic tank. It’s possible that you don’t want to park your car or truck on top of it, and you don’t want visitors to your house to park their cars on top of it, either. Due to the weight of the automobiles, there is a possibility that the tank would collapse due to excessive pressure.

2. If You Want to Landscape or Remodel Your Property

If you want to build an addition to your home or perform some landscaping around your property, you will need to know where your septic tank is located. Nothing with deep or lengthy roots should be planted on top of or in the area of your tank, since this can cause problems. If roots are allowed to grow into the pipes of your septic system, it is conceivable that your system will get clogged. When you know where the tank is going to be, you may arrange your landscaping such that only shallow-rooted plants, such as grass, are in close proximity to the tank.

For starters, the tank’s weight might lead it to collapse due to the weight of the construction. A second issue is that getting access to the tank becomes more difficult if a permanent building has been constructed on top of it.

3. If a Problem With Your Tank Occurs

Knowing where your tank is buried might also assist you in identifying problems as soon as they arise. Consider the following scenario: you wake up one morning and see that there is flooding or ponding water in the region surrounding your septic tank – a sign that your system is overwhelmed and that an excessive amount of water is being utilized all at once.

4. Ease of Getting It Fixed

Once you have determined the location of your sewer system, you can quickly send a plumber to it in the event that something goes wrong with the system, saving everyone both time and money. Get in Touch With A Plumber Right Away

1. Use a Septic Tank Map

First and foremost, make use of a road map. Using a map is frequently the quickest and most convenient alternative. Most counties keep records of the installation of septic tanks at all of their residents’ residences. These maps should include schematics that illustrate the specific placement of the tank on the land, as well as measurements that allow you to measure and locate the tank’s exact location on the property. Never forget that landmarks may shift over time depending on when the tank was built, so if there are a few more bushes or a tree nearby, don’t rule out that location as a possibility.

  1. If you are unable to locate a map or other paperwork that identifies the location of your septic tank, there are a few locations to try to see if you can obtain a map of the area.
  2. The county health department is responsible for keeping track of septic systems.
  3. A septic tank’s position could be depicted on a survey map, for example.
  4. The creation of your own map and documentation may be worthwhile if you cannot locate a map or blueprint of your property and nothing appears to be on file regarding it at the county health department or another municipal agency.

2. Follow the Pipes to Find Your Septic Tank

Whether or not there is an existing map of your septic tank on file, or whether or not you choose to develop one for future reference or for future homeowners, you will still need to track down and find the tank. One method of accomplishing this is to follow the sewer lines that lead away from your residence. The septic tank is situated along the sewage line that goes from your home and into the yard, as we’re sure you’re aware. Find a four-inch sewer pipe in your basement or crawl space. This is the line that will lead to your septic system and should be accessible from the ground level.

  1. In general, though, you’re searching for a pipe with a diameter of four inches or more that leaves your home via a basement wall or ceiling.
  2. By inserting a thin metal probe (also known as a soil probe) into the earth near the sewage line, you can track the pipe’s location.
  3. The majority of septic tanks are located between 10 and 25 feet away from your home, and they cannot be any closer than five feet.
  4. Going via the sewage line itself is another method of locating the septic tank utilizing it.
  5. Drain snakes are typically used to unclog clogs in toilets and drains, and they may be used to do the same thing.
  6. When the snake comes to a complete halt, it has almost certainly reached the tank.
  7. While drawing the snake back, make a note of how far it has been extended and whether it has made any bends or turns.
  8. When looking for your septic tank, you may use a transmitter that you flush down the toilet and it will direct you straight to the tank.

If you only want to keep an eye on the condition of your tank and don’t need to dig it up and inspect it, you may thread a pipe camera into the sewer pipe to see what’s happening.

3. Inspect Your Yard

Septic tanks are designed to be as unobtrusive as possible when they are erected. With the passage of time, and the growth of the grass, it might be difficult to discern the visual indications that indicated the exact location of your septic tank’s installation. However, this does not rule out the possibility of finding evidence that will take you to the location of your septic tank in the future. First and foremost, you want to rule out any potential locations for your septic tank, such as:

  • Under a road or similar paved surface, for example. Right up against the house (the tank must be at least five feet away)
  • Directly in front of the home Immediately adjacent to your well (if you have one)
  • In close proximity to trees or densely planted regions
  • In the shadow of a patio, deck, or other building

Once you’ve ruled out any potential locations for your tank, it’s time to start hunting for indications as to where it may be hiding in plain sight. Keep your eyes peeled as you go about your property, looking for any inexplicable high or low points that might suggest the presence of an underground tank. When looking at your property, you could see a hill or mound on the ground, which is frequently an indication that there is a septic tank nearby. One further item to consider while searching for the right septic tank for your home is the amount of grass or other foliage in your yard.

Alternatively, if the tank was not adequately buried, you may observe a “bald patch,” which is an area where the grass is struggling to grow in the vicinity.

4. Talk to Your Neighbors

If your neighbors have septic systems as well, they may be able to assist you in locating your tank. Inquire of your neighbors about the location of their septic tanks in relation to their residences. Having a polite conversation with your neighbors regarding septic systems not only provides you with a means to figure out where yours is, but it may also serve as a friendly introduction to the other residents of your community.

5. Look for Your Septic Tank Lid

It is only the first step in the process to discover where your septic tank is located. After you’ve located your tank, the following step is to locate the lid. You can locate it with the help of your soil probe. The majority of septic tanks are rectangular in shape and measure around five feet by eight feet. The perimeter of the tank should be marked with a probe once it has been probed around. A shallow excavation with a shovel within the tank’s perimeter and near the center (or broken into halves for a two compartment tank) should show the position of the lid or lids if you are unable to feel them by probing.

The tank itself is likely to be filled with foul-smelling vapors, if not potentially hazardous ones.

What to Do After You Find Your Septic Tank

Once you’ve determined where your tank is, it’s time to bring in the specialists. Trust us when we say that opening a septic tank is not something that just anybody wants to undertake. Concrete septic tank lids are extremely heavy and must be lifted using special lifting gear in order to be removed. Since the vapors are potentially dangerous due to the contents of the tank, please respect our advice and refrain from attempting to open the tank yourself. An exposed septic tank can be hazardous to anybody wandering around your property’s perimeter, and if someone were to fall into it, it might be lethal owing to the toxicity of the sewage in the tank.

However, before you send in a team of experienced plumbers, there are a few things you can do to ensure that others do not experience the same difficulty locating the tank and to make locating the tank in the future easier.

1. Mark Its Location

The likelihood is that you will not want to post a large sign in your yard that reads “Septic Tank Here!” but you will want to leave some sort of marking so that you can quickly locate the tank and lid when you need them. In an ideal situation, the marker will be substantial enough that it will not blow away in the wind and will not be readily moved by children who are playing in the yard. A patio paver, a potted plant, or a decorative gnome or rock are just a few of the possibilities. In addition to putting a physical sign beside the septic tank, you may draw a map or layout of the area around it to illustrate its position.

2. Take Care of Your Septic Tank

Taking proper care of your tank may save you hundreds of dollars over the course of its lifetime. The expense of maintaining your system could be a few hundred dollars every few years, but that’s a lot less than the thousands of dollars it might cost to repair or replace a damaged tank or a malfunctioning septic system. Two strategies to take better care of your septic tank and system are to avoid utilizing your drain pipes or toilets as garbage cans and to use less water overall. Things like paper towels, face wipes, and cat litter should not be flushed down the toilet since they are not designed to be flushed.

In addition, installing low-flow faucets and high-efficiency toilets can help you reduce the amount of water used in your home.

For example, you don’t want to be washing load after load of laundry or running your clothes washer at the same time as your dishwasher all at the same time.

Call a Professional Plumber

Maintenance of a septic system is not normally considered a do-it-yourself activity. In the Greater Syracuse region, whether your septic tank requires pumping out or cleaning, or if you want to replace your tank, you should use the services of a reputable plumbing firm to do the job right. If you’ve attempted to locate your septic tank on your own and are still unsure of its position, it may be necessary to enlist the assistance of a professional local plumber. Our team at Mr. Rooter Plumbing of Greater Syracuse can assist you with locating, maintaining, or replacing your home’s sewage tank.

See also:  What Do We Need To Do To Work On Our Septic Tank? (Solution)

Request an Estimate for the Job

Septic System Frequently Asked Questions

A septic system, sometimes known as a septic tank, is an underground system that processes the sewage that flows from your house before disposing of the treated, cleaner water. Septic systems are typically seen in residential areas. The treated water is subsequently re-introduced into the environment through filtration.

This is critical because untreated sewage may harm nearby streams and water systems, as well as the soil around the perimeter of your septic system. Because your septic system is designed to cleanse and filter sewage, it is critical that it is in proper operating order.

What is a Drainfield?

The drainfield, also known as the leach field, is the area where the water from your septic system is sent after it has been cleansed and filtered. It is necessary to construct a drainfield in order to ensure that water is distributed uniformly back into the soil.

How do I find my septic system?

If you’re fortunate enough to have a contemporary septic system in your yard, it may be equipped with an access lid that is visible from the ground floor. If this is the situation at your residence, locating your septic system is as simple as taking a few steps into your backyard. It’s unfortunate that this isn’t true for older septic systems. It’s possible that you may locate an older system in your home by checking for greener, faster-growing grass or even an area with less growth than the rest of your yard if you live in an older home.

This will show you exactly where your septic system is located in your yard, if you have one.

You’ll need to look for the location where your septic system’s sanitary line exits your home and follow that line until you find your septic tank, which will take some time.

If you are unable to discover your septic system, your yard may need to be dug up by a septic system installation in order to locate your septic tank as a last option.

How long do septic systems last?

Septic systems are not designed to endure for a specific number of years, thus there is no defined time frame. In the event of adequate maintenance, you may expect your septic system to last several decades before it has to be replaced; but, if your system fails or deteriorates as a result of bad care, its lifespan will be drastically diminished. In order to obtain an accurate estimate of how much longer the life of your septic system may be extended, you must first have it checked thoroughly by an experienced septic system installation or repairer.

What’s the advantage of installing a newer septic system rather than an older system?

Although it is not required to install a new system, there are advantages to having a modern septic tank rather than an older one. For starters, when you get a new septic tank, you can be confident that it will serve you for decades if it is properly maintained, and you will not have to worry about it being “too old.” Additionally, newer systems have been modified to reduce the likelihood of your system becoming clogged, and if something does go wrong with a new system or when it comes time to have your septic system pumped, a new system will likely be easier to locate because they are frequently constructed with ground-level lids.

New septic systems also provide a further treatment for your waste water, allowing it to be cleaner before it is released into the surrounding environment.

All of that being said, if your property currently has an older septic system installed, it should not need to be updated as long as it complies with the standards of your local health department and is in excellent operating order.

How much does a new septic system cost?

Installation of new septic systems may be a significant financial commitment, with costs typically reaching tens of thousands of dollars. Whenever you have to replace an outdated septic system, you should look into financing alternatives that will make it simpler for you to pay for a new septic system in the long run. Purchase further information from a septic system installation business on how to obtain septic systems at the most competitive prices while also taking advantage of low-interest financing options.

How big is my septic tank?

Septic tank capacity is determined by the amount of water consumed in your property as well as local codes and requirements. Check with your local health agency to find out how big your tank is before installing it.

Why should my septic system be pumped out?

Without regular pumping, the gases emitted by human waste accumulate in your septic system, increasing the risk of septic tank damage and the need for more frequent pumping. The regular pumping of your septic system will allow you to limit the rate at which your tank deteriorates and save money in the process. It’s crucial to remember, though, that degeneration is unavoidable in the long run. It is only via regular maintenance, such as pumping your tank, that your septic system will survive longer.

Does my tank need to be dug up to know if it needs to be pumped?

Risers are commonly found in newer septic systems, which allow you to access your tank from the ground level through a lid. It is straightforward for any septic system professional to determine whether or not your yard has risers placed, and whether or not it is necessary to pump it. If, on the other hand, your tank cannot be accessible from the ground level, it will need to be dug up in order to determine whether it has to be drained. Instead of inspecting your septic system to see whether it needs to be pumped on a regular basis, set a timetable for having your system pumped every 2-3 years.

Why should I have risers and lids installed on my septic system?

As a result, when it comes time to find, pump, or repair your septic system, risers are the best choice since they provide ground-level access to your system. Having a septic system lid will allow you to mow your grass while still being able to find your system with no difficulty. Lids and risers also have the advantage of being accessible all year round, as opposed to earlier septic systems that could only be accessed by digging a trench through your yard. If your septic system has to be pumped or repaired for any reason during the winter months, getting beneath layers of frozen earth can be difficult, if not impossible, and you may be forced to wait until the spring to have access to your tank again.

How often should my septic system be pumped out?

A typical septic system contains a 1,500-gallon tank, which needs to be pumped around every 2-3 years for a household of four, according to industry standards. If you have less than four people living in your house, you will most likely be able to pump your septic system every five years rather than every three.

You should speak with your local health agency to determine the exact size of your tank, and you should consult a septic system business to determine how frequently your tank should be pumped based on the size of your family and the size of your septic tank.

Do I need to have the septic tank pumped if I’m selling my house?

Consult with your local health department to learn about the restrictions that apply to your region of residence. Generally speaking, as long as your septic system has been pumped on a regular basis by a licensed septic system company and recently enough for the new homeowners to be able to live there for a year or two without having to pump the septic system, you should not be required to have it pumped again in the near future.

How do I find someone to pump my septic system?

It is important to be aware that not all septic system businesses are licensed and that not all firms properly dispose of or recycle the waste they pump from your septic system when you are looking for one to pump it. Finding a firm that complies with EPA standards should be your first concern, and then you should look at price, how pricing is split down, and which company is delivering the most honest, economical, and dependable service should be your next consideration. Investigate business evaluations, and when you select a septic system provider to pump your septic tank, be certain that they do the work properly, leaving enough water and waste to keep the sewage decomposing while leaving no visible trace more than a few inches of waste behind.

How much does it cost to have my septic system pumped?

It is recommended that you call many pumpers before making a selection, and that you ask as many questions as possible to ensure that you are receiving the best service for your money. Pumping may cost upwards of $200, so it is always wise to shop around before making a decision. You should not consider it a waste of money to have your septic system pumped when the time comes. By correctly maintaining your septic system, you may avoid spending tens of thousands of dollars to replace your septic system long before it should have been replaced in the first place.

What happens if I don’t have my septic system pumped?

The sediments will pile up in your septic tank if you don’t pump it out regularly, ultimately overflowing into the drain field and clogging the drain field. Backups can occur, causing damage to your property and even necessitating the replacement of your drain field, which can be a very expensive error.

I just had my septic system pumped. Why is it full already?

Septic systems are designed to refill rapidly since the purpose of pumping is not to remove water but rather to remove non-biodegradable waste, and the water itself is not the aim of pumping. Once your septic system has been pumped and you begin to use the water in your house, your tank will quickly refill in order to maintain good operation of the system. If the water level rises to a point where it is above the outlet line, contact your septic system service provider for assistance immediately.

What do you look for when inspecting my septic system?

When we do an inspection, we make certain that your septic system is in good operating condition and that it satisfies the standards for receiving a Certificate of Compliance. If you’re planning to sell your home, you should have your septic system checked out by a professional who is certified by the Minnesota Pollution Control Agency. This will allow you to sell your home faster and for more money, if you can prove that your system has been checked out by an accredited professional. The level of liquid in your septic tank will be checked, and we’ll make sure there is no surface-level discharge.

We’ll also note whether the level of solid waste in your septic tank indicates that it should be pumped, and whether any repairs are required to improve the overall functionality of the system.

The drains in my home aren’t draining as quickly as they normally do. Does this have to do with my septic system?

Drains that are clogged and that empty slowly are not necessarily a big source of concern. Before presuming that there is an issue with your septic system, check sure that there isn’t anything obstructing your drain first. In the case of one plumbing fixture in your house that is draining slowly, it is likely due to clogging; however, if all of the drains in your home are slow or leave waste backed up, it is probable that your septic system requires inspection and may even require pumping.

What happens when my septic system fails?

Symptoms of a failing septic system may include minor issues such as drain breaks or pipes that have been stopped, which can be caused by tree roots intersecting with the system. Septic system failure, on the other hand, might indicate that your septic tank has degraded to the point that it cannot be repaired and must be replaced. A blocked drainfield will hopefully not become your problem because it is the most expensive component of your system to replace; nevertheless, if it does, you must act quickly to make the necessary repairs or else your waste will continue to back up, perhaps causing damage to your property.

You’ll need to replace the drainfield as soon as possible to avoid further pollution of drinking water sources.

How do I prevent my septic system from failing? How can I properly maintain my septic system?

Your septic system should degrade at a normal rate over the course of several decades if you maintain it on a regular basis. Maintenance normally consists of getting your septic system pumped on a regular basis and making certain that you do not flush or wash anything down the drain that might block your septic system.

What shouldn’t I flush down the toilet?

As a general rule, only human waste and toilet paper should be flushed. There are several reasons why flushing medicine down the toilet is not a good idea. First, medication might kill some of the bacteria in your septic tank, which is necessary to break down solid waste. Second, drugs can pollute adjacent well water. In addition, you should avoid flushing feminine hygiene items, paper towels, tissues, hair, cat litter (even if it is flushable), diapers, wipes, condoms, cigarettes, and anything else that seems to be inorganic and shouldn’t be flushed down the toilet.

What shouldn’t I pour down the drain?

Grease from the kitchen, motor oil, anti-freeze, gasoline, paint, and food should not be flushed down the toilet or drain. You should avoid flushing anything down your drain other than soap and water, and you should especially avoid flushing any form of chemical down your drain that should not be recycled back into the environment, such as fertilizer.

Is using a garbage disposal bad for my septic system?

Drains should not be clogged with grease from the kitchen or motor oil or antifreeze or gasoline or paint. The only item that should be flushed down your drains is soap and water; however, you should avoid flushing any form of chemical down your drain that should not be recycled back into the environment.

Should I add bacteria to my septic system?

Aside from being completely useless, introducing bacteria to your septic tank is also highly discouraged. The bacteria produced by human waste is sufficient to break down the solid sewage in your tank without the need of bacteria supplements or other methods. If, on the other hand, multiple members of your home are using pharmaceuticals, they will enter your septic system through human waste and kill some of the beneficial bacteria in your tank, causing it to malfunction.

Please contact the firm who installed your septic system to see whether or not you should be worried about the amount of bacteria-killing compounds entering the system.

There’s a strong sewer odor outside of my house. Could this be my septic tank?

Strong sewage stench coming from your yard might be coming from your septic system, but it could also be coming from someplace else completely. Identifying the source of the smell is important. Check for propane or gas leaks in your home before concluding that your septic system is at fault; however, if your gas or propane lines are not leaking, determine how long it has been since you had your tank pumped, and whether there is any sewage waste in your yard or other signs of septic system failure before making your final decision.

See also:  What Is The Required Depth For Septic Tank Lateral Lines In Arkansas? (Correct answer)

Can my septic system contaminate nearby water?

It is possible for your septic system to pollute surrounding water sources if it is not properly managed or fails completely. In the event that you suspect that your septic system is failing, make sure that it is routinely pumped and inspected by an expert.

My gutters’ downspouts drain into my yard above my septic system. Is this a bad thing?

The drainage of your gutters into your yard above your septic system, and particularly into your drainfield, can be hazardous to your septic system. All water should be diverted away from your septic system in order to minimize flooding and damage to your septic system’s tank or drain field.

How Your Septic System Works

Underground wastewater treatment facilities, known as septic systems, are often employed in rural regions where there are no centralized sewage lines. They clean wastewater from residential plumbing, such as that produced by bathrooms, kitchen drains, and laundry, by combining natural processes with well-established technology. A conventional septic system is comprised of two components: a septic tank and a drainfield, often known as a soil absorption field. It is the septic tank’s job to decompose organic matter and to remove floatable stuff (such as oils and grease) and solids from wastewater.

Alternate treatment systems rely on pumps or gravity to assist septic tank effluent in trickling through a variety of media such as sand, organic matter (e.g., peat and sawdust), constructed wetlands, or other media to remove or neutralize pollutants such as pathogens that cause disease, nitrogen, phosphorus, and other contaminants.

Specifically, this is how a typical conventional septic system works:

  1. All of the water that leaves your home drains down a single main drainage pipe and into a septic tank. An underground, water-tight container, often composed of concrete, fiberglass, or polyethylene, serves as a septic system’s holding tank. Its function is to retain wastewater for a long enough period of time to allow particles to sink to the bottom and form sludge, while oil and grease float to the surface and produce scum. Sludge and scum are prevented from exiting the tank and moving into the drainfield region by compartments and a T-shaped outlet. After that, the liquid wastewater (effluent) exits the tank and flows into the drainfield. The drainfield is a shallow, covered hole dug in unsaturated soil that serves as a drainage system. Porous surfaces are used to release pretreated wastewater because they allow the wastewater to pass through the soil and into the groundwater. In the process of percolating through the soil, wastewater is accepted, treated, and dispersed by the soil, finally discharging into groundwater. Finally, if the drainfield becomes overburdened with too much liquid, it can flood, causing sewage to flow to the ground surface or resulting in toilet backups and sink backups. Finally, wastewater percolates into the soil, where it is naturally removed of harmful coliform bacteria, viruses, and nutrients. Coliform bacteria are a kind of bacteria that may be found in the intestines of humans and other warm-blooded animals, with humans being the most common host. As a result of human fecal contamination, it is a sign of this.

The Guadalupe-Blanco River Authority has built an animated, interactive model of how a residential septic system works, which you can view here.

Do you have a septic system?

It’s possible that you’re already aware that you have a septic system. If you are not sure, here are some tell-tale symptoms that you most likely are:

  • You make use of well water. In your home, the water pipe that brings water into the house does not have a meter. In the case of a water bill or a property tax bill, you will see “$0.00 Sewer Amount Charged.” It is possible that your neighbors have a septic system

How to find your septic system

You can locate your septic system once you have confirmed that you have one by following these steps:

  • Taking a look at the “as constructed” drawing of your house
  • Making a visual inspection of your yard for lids and manhole covers
  • Getting in touch with a septic system service provider for assistance in locating it

Failure symptoms: Mind the signs!

A bad odor is not necessarily the first indicator of a septic system that is failing to work properly. Any of the following signs should prompt you to seek expert assistance:

  • Water backing up into the drains of homes and businesses
  • It is especially noticeable in dry weather that the drainfield grass is bright green and spongy. The presence of standing water or muddy soil near your septic system or in your basement
  • A strong stench emanating from the area surrounding the septic tank and drainfield

How do I find the septic tank in my yard?

Q:Can you tell me where my septic tank is located in my yard? As a first step, determine the place where the main drain line (4-inch pipe) exits your property. This will show whether or not the tank is located just outside of that area. With a metal probe, trace the pipe across the yard, probing every 2 feet along the way. It is essential that septic tanks be at least 5 feet away from the home, although most are between 10 and 25 feet away. They are generally rectangular in design and measure roughly 5 feet by 8 feet in length and width respectively.

You can use a metal probe to detect the boundaries of the object and mark the perimeter of the object.

Depending on when you acquired the property, a schematic of your septic system may have been provided as part of your home inspection.

EHT Newsletter

Become a member of the EHT Newsletter and receive monthly DIY tips as well as industry updates, trends, and more.

Hot Product

For optimum corrosion protection, Maze STORMGUARD® nails are double hot dipped galvanized and feature a thick zinc coating to provide maximum corrosion resistance. All Maze STORMGUARD® Nails are hot-dip galvanized to meet or exceed the ASTM A 153 criteria for galvanizing. For fiber cement siding, cedar and redwood siding, roofing, cedar shakes and shingles, as well as PVC trim products and other applications, Maze offers high-quality double hot-dipped nails.

How to Locate Your Septic Tank

It may seem impossible to imagine that one of the largest and most visible elements of your whole plumbing system is also one of the most difficult to locate, but when your property is served by a septic system, this is perfectly true. A strong explanation for this is because septic tanks are huge, unattractive, stink horrible and give off an unwarranted impression of dirt. Not only does burying them underground assist to prevent them from harm, but it also provides you with additional useable space on your property and conceals what would otherwise be a blight on your landscape.

This site is dedicated to assisting you in locating your septic system without the need for any time-consuming digging.

How To Find A Septic Tank: Step By Step

It is critical to maintain the health of your septic tank since it is responsible for securely storing and handling the wastewater that drains from your house. It is necessary to pump your septic tank once every 1-3 years, depending on the number of people living in your household and the size of your tank, in order to avoid septic tank repairs or early failure, which means you must be familiar with the location of your tank. It’s not often simple to identify your septic tank, and many plumbers charge extra for this service, which is especially true if your tank’s lid is buried beneath.

1. Gather Some Helpful Tools

Septic tank location may be made much easier with the use of several simple instruments and techniques. To locate your septic tank, you only need to know the following information: A soil probe is one of the most useful instruments for locating a septic tank. It is a tiny piece of metal that is used to puncture through the earth and detect anything that could be buried underneath. Start at the point where your sewage line exits your home and work your way straight out, inserting your soil probe every two feet along the way.

Using this method, you may also locate the cover for your septic tank.

While we highly advise keeping your cover clean and exposed in the event that you require emergency septic service, we recognize that this is not always the case.

2. Use a Septic Tank Map

If you are a new homeowner who is trying to figure out where your septic tank is, a septic tank map should be included in your inspection documentation. You can use this information to assist you in pinpointing the exact position of your storage tank. If you don’t have access to this map, there are a few of additional strategies you might employ.

3. Start Ruling Areas Out

The location of a septic tank cannot be constructed in specific areas due to the risk of causing major damage to your property or tank, as specified by local rules. Your septic tank will not be affected by the following:

  • Immediately adjacent to your well
  • Beneath your home
  • Directly against your home
  • For example, underneath your driveway
  • Under trees
  • And other locations. Structures like a patio or deck are good examples of this.

4. Inspect Your Property

If you take a hard look around your land, there’s a high possibility you’ll be able to locate your septic tank without having to do any probing whatsoever. In many circumstances, a septic tank may be identified by a slight dip or slope on your land that cannot be explained by any other means. Due to the fact that the hole that your contractors excavated for your septic tank may not have been exactly the proper size, they proceeded to install the tank anyhow. This is a rather regular occurrence.

When there is a minor divot or depression, it indicates that the hole was too large and that your contractors simply did not fill the depression to level the hole.

The likelihood of your septic tank being discovered in a few specific locations is quite high.

  • Your water well, if you have one (for a variety of reasons that are rather clear)
  • Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built and no one performed a proper inspection before it was built)
  • Any paved surfaces (it won’t be under a driveway, sidewalk, or patio unless they were added after the home was built and no one conducted a proper inspection before it was built)
  • Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built If there is any particular landscaping

5. Inspect Your Yard

A comprehensive investigation of your yard may be necessary to discover your septic tank considerably more quickly in some cases. The following are important items to check for in your yard:

  • If your septic tank is overfilled, sewage can leak out into the ground and function as fertilizer for your lawn, resulting in lush green grass. A patch of grass that is unusually lush and green is a good indication that your septic tank is directly beneath it
  • Puddles that don’t make sense: If your septic tank is seriously overfilled, it is possible that water will pool on your lawn. Another telltale sign that your septic tank is below ground level is an unexplained puddle of water. Ground that is uneven: When installing septic tanks, it is possible that the installers will accidentally create high or low spots on your lawn. If you come across some uneven ground, it’s possible that your septic tank is right there.

The metal soil probe can let you find out for certain whether or not your septic tank is located in a certain area of your yard or not. As soon as your metal soil probe makes contact with the tank, you may use your shovel to dig out the grass surrounding it and discover the septic tank lid.

6. Follow Your Sewer Main/Sewer Pipes

Following your sewage lines is one of the most straightforward methods of locating your septic tank. These pipes have a diameter of roughly 4 inches and are commonly found in the basement or crawlspace of your house. They are not dangerous. Following the pipes from your house out into your yard, using your metal soil probe every 2 feet or so until you reach the tank, is a simple process once they are located. Aside from that, every drain in your home is connected to your sewage main, which in turn is connected to your septic tank.

The likelihood that one of your major sewer lines is located in your basement or crawlspace is high if you have exposed plumbing lines in your basement or crawlspace.

If the line is labeled, it is usually made of plastic or rubber. It is important to determine where this line exits your property and in which direction it is moving, as it often travels straight out to the septic tank itself.

7. Check Your Property Records

Lastly, if all else fails, a search of your property’s public records will almost certainly reveal the location of the tank you’re looking for. Your builders most likely secured a permit for your property because septic systems are required to be installed by law in every state. In order to do so, they had to create a detailed plan that showed your property as well as the exact location where they intended to install the tank. This is done to ensure that the local health department is aware of the tank and is prepared to deal with any issues that may arise as a result of its presence.

If you look hard enough, you may be able to locate the original construction records for your home without ever having to get in your car or visit your local records center.

What to Do Once You Find Your Septic Tank

Upon discovering the position of your septic tank, you should mark its location on a map of your property. Use something to indicate the location of your lid, such as an attractive garden item that can’t be changed, to help you locate it. A birdbath, a rock, or a potted plant are just a few of the possibilities. You are now ready to schedule your septic tank inspection and pumping service. Contact us today! If you have any more concerns regarding how to locate your septic tank, or if you want septic tank servicing, please contact The Plumbing Experts at (864) 210-3127 right now!

Leave a Comment

Your email address will not be published. Required fields are marked *