Who Keeps Records Of Where Is The Septic Tank Located? (Correct answer)

One is your county health department. County health departments often maintain records of septic systems. You can also check to see if there is a property survey map available from your municipality or county. A survey map might contain the location of a septic tank.

Where is the septic tank on my property?

  • One of the best ways to pinpoint exactly where the septic tank is on your property is to perform a records search. If you still have a copy of your original home inspection, there may be an attached document called the “as-built.”

Are septic tank locations public record?

Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.

How do I find out where my septic tank is?

Follow the Main Sewer Line Look for a pipe that’s roughly four inches in diameter that leads away from your house. Remember the location of the sewer pipe and where the pipe leaves your home so you can find it outside. The sewer pipes will lead to where your septic tank is located.

How do you find a septic tank in an old house?

Look for the 4-inch sewer that exits the crawl space or basement, and locate the same spot outside the home. Septic tanks are usually located between ten to 25 feet away from the home. Insert a thin metal probe into the ground every few feet, until you strike polyethylene, fiberglass or flat concrete.

How do you find a metal detector with a septic tank?

6 Steps to Locate a Septic Tank

  1. Find Your Main Sewer Drain Line. Sewage from your toilets, sinks, and showers collects into a main drain line.
  2. Check Permits and Public Records.
  3. Determine Septic Tank Material.
  4. Time to Dig.
  5. Mark the Location for Future Maintenance.

How far is septic tank from house?

Requirements vary from one area to another, but the normal minimum distance from the house is 10 feet. If you’ll be using a private well for drinking water, however, note that many state departments of health require a minimum of 50 feet between a new septic tank and a well, according to APEC Water.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

How were old septic tanks built?

Many of the first septic tanks were concrete tanks that were formed out of wood and poured in place in the ground and covered with a concrete lid or often some type of lumber. In the 1960s, precast concrete tanks became more prevalent as the standard of practice improved.

How deep is a septic tank in the ground?

Septic tanks are typically rectangular in shape and measure approximately 5 feet by 8 feet. In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

How deep is the septic tank outlet pipe?

After the solids settle out, effluent leaves the septic tank through the outlet pipe and flows to the drain field. The outlet pipe should be approximately 3 inches below the inlet pipe.

Can you use a metal detector to find sewer lines?

Using a Plumbing Pipe Detector to Locate Underground Pipes. As a property owner there will be times when, for a variety of reasons, you will need to locate underground metal objects. For example, using a pipe locator metal detector you can easily pinpoint leaking underground pipes quickly.

Are septic tanks metal?

Steel Septic Tank—Steel septic tanks are the least durable and least popular tank option. Designed to last no more than 20-25 years, they can be susceptible to rust even before that. Steel top covers can rust through and cause an unsuspecting person to fall into the tank.

Are septic tanks made of metal?

The majority of septic tanks are constructed out of concrete, fiberglass, polyethylene or coated steel. Typically, septic tanks with a capacity smaller than 6,000 gallons are pre-manufactured. Larger septic tanks are constructed in place or assembled on-site from pre-manufactured sections.

Find Septic soakaway / drainfield location using documents

  • Send in your question or comment regarding septic tank and drainfield records, sketches, or diagrams that demonstrate component placement – utilizing documented information to locate the septic system
  • And

InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Using records to locate a septic drainfield or soakbed is described as follows: How to get records and revew papers in order to locate a septic tank, drainfield, or soakaway bed in a home or business. How to request paperwork that can document the septic system design “as approved” as well as that which was “as built” is explained in detail.

We also have anARTICLE INDEX for this topic, and you can use the SEARCH BOXes at the top and bottom of the page to obtain the information you need quickly and easily.

How to Use Septic System Records to Find the Drainfield – Whom to Ask – How to Find the Septic Leach Fields – Part 3

When it comes to septic systems, understanding where the drainfield is may be difficult because they are often underground systems. Finding the drainfield can be difficult because they are usually hidden. Because haphazard excavation by hand is extremely time-consuming and because haphazard excavation by backhoe can cause unnecessarily extensive damage to both a septic system and a homesite, drawing a sketch of the location of a septic tank, distribution box, and drainfield trenches or pits is a valuable document to prepare and keep with a home.

  1. Ask the owner if they have any sketches to leave with you; if they don’t have any sketches but know where the septic components are, walk the property with them and produce your own sketch of the septic components.
  2. Because anybody seeking for the system in the future is likely to start by locating the point where the sewage line exits the building, a former service worker or contractor understood it was a dependable location to leave a sketch.
  3. In certain cases, even though septic system and drainfield layout drawings have been submitted, it is possible that the “as built” drain field will not be identical to the plan filed since blockages might be identified during the drain field installation process.
  4. The septic tank’s center may be located using the simple but accurate measurement triangle depicted in the diagram below.
  5. It is not need to be visually appealing, to scale, or costly.
  6. Never rely on the local health agency or the building department to have drawings that show where the fields are located precisely.
  7. During our investigation, we discovered that one municipality had purposefully destroyed 50 years’ worth of septic and other construction plan records because they were tired of being pestered by residents who wanted that information and then complained when it turned out to be incorrect.
  8. Speak with contractors who are listed under the categories of Excavation, Plumbing, and Septic System Service since the excavator who has installed or worked on the property of your concern may be classified under one of those categories but not all of them.
  9. This article series, as well as our accompanyingSEPTIC LOCATION VIDEO, demonstrates how to locate the leach field or drainfield section of a septic system by going around a site with a camera.

(Septic drain fields are sometimes referred to as soil absorption systems or seepage beds in some circles.)

Reader CommentsQ A

@Joseph Coburn, please display the records regarding your septic system. Yes, Joseph, I’d be delighted to assist you in locating the leach bed on your property: Simply follow the “how to identify the drainfield” techniques and procedures outlined in the articles listed above under “Recommended Articles” labeled “How to Find the Drainfield.” LOCATION OF THE SEPTIC DRAINFIELD – BEGIN HERE PRECISE DRAINFIELD PIPE LOCATION – follow these procedures if you need to be precise with your drainage pipe location.

  • More drainfield choices and approaches are available, including: It is necessary to excavate in order to locate drainage fields.
  • REMARKING DRAINFIELD LOCATIONS OUT OF THE BOUNDS OF THE POSSIBLY UNLIKELY CLUES FROM THE VISUAL WORLD LOCATE THE DRAINFIELD VIA VISUAL INSTRUCTIONS LOCATE THE SEPTIC TANK IN ORDER TO FIND THE LEACH BEDS LOCATE @Dan Dyer, thank you for your comment.
  • also have a look at the comments on your identical post at The location of my drain field has been discovered, and I need to figure out where the rest of it is before I can proceed to complete the task on time.
  • As well as this, see THE LOCATION OF THE SEPTIC TANK AND THE LOCATION OF THE SEPTIC D-BOX Attempting to locate a septic system Septic drain field is located at 13368 East 49th Drive in Yuma.
  • I’m looking to discover if there is any public information on a septic tank located at 5391 Hollis Goodwin rd.
  • Continue reading at an SURPRISING DRAINFIELD LOCATIONALITY Select a topic from the closely-related articles listed below, or browse the entireARTICLE INDEX for more information.

Septic Drainfield Location Articles

  • Clearance Disturbances, Septic System
  • Odors, Septic or Sewer
  • Locations of Septic Components
  • Septic Drainfield Inspection Test at Home
  • Septic Drainfield Location
  • Septic Drainfield Inspection Test at Work
  • LOCATION OF THE DRAINFIELD PIPE, EXACT
  • EXCAVATE TO LOCATE THE DRAINFIELD
  • REASONS FOR LOCATION OF THE DRAINFIELD
  • Recordings to LOCATE the DRAINFIELD
  • SURPRISING DRAINFIELD LOCATIONS
  • UNLIKELY DRAINFIELD LOCATIONS
  • VISUAL CLUES LOCATE the DRAINFIELD
  • VISUAL CLUES LOCATE the SEPTIC TANK
  • SEPTIC DRAINFIELD RESTORERS
  • SEPTIC DRAINFIELD SIZE
  • SEPTIC DRAINFIELD SHAPE
  • SEPTIC TANK, HOW TO FINDfor information on locating the septic tank, chamber, drywell, or seepage pit
  • SEPTIC DRAINFIELD RESTORERS
  • SEPTIC TAN SEPTIC VIDEOSon the location of the septic system

Suggested citation for this web page

It is necessary to keep records in order to locate the drainfieldDatInspect A pedia.com- online encyclopedia of building environmental inspection, testing, diagnosis, repair and guidance on issue avoidance. Alternatively, have a look at this.

INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS

Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.

Ask a Question or Search InspectApedia

We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things.

Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your submission will appear when it has been reviewed by a moderator. We sincerely apologize for the inconvenience.

Technical ReviewersReferences

Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.

How To Find Septic Tank Location: A Guide for Property Owners

The majority of individuals prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank could be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.

Follow the Main Sewer Line

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your property. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about down there. Look for a pipe with a diameter of around four inches that is leading away from your home or building. Keep a note of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your home.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may have to probe a bit further out before striking the tank.

Inspect Your Property

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your yard. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about in it. Look for a pipe with a diameter of around four inches that is leading away from your home or business. Recall where your sewer pipe is located, as well as where it exits your home, in order to locate it while you are out in the field.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your house.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may need to probe a bit further out before striking the tank.

  • Paved surfaces
  • Unique landscaping
  • Your water well, if you have one
  • And other features.
See also:  How Does The Inside Of A Septic Tank Work? (TOP 5 Tips)

Surfaces with pavers; special landscaping; your water well, if you have one; and other features.

Check the Property Records

Are you unsure about how to obtain this? Simply contact your county’s health department for further information. Check with your local health department to see if they have a property survey map and a septic tank map that you can borrow. Perhaps you will be shocked to learn that there are a variety of options to obtain information about your property without ever leaving the comfort of your own residence. Building permits, for example, are frequently found in county records, and they may provide schematics with specifications on how far away from a septic tank a home should be, as well as other important information such as the size of the tank.

Most counties, on the other hand, keep records of septic tank installations for every address. For further information on the placement of your septic tank, you can consult your home inspection documents or the deed to the property.

Don’t Try to Fix Septic Tank Issues Yourself

Septic tank problems should be left to the specialists. The Original Plumber can do routine maintenance on your septic tank and examine any problems you may have once you’ve located the tank. It is not recommended to open the septic tank lid since poisonous vapors might cause major health problems. Getting trapped in an open septic tank might result in serious injury or death. While it is beneficial to know where your septic tank is located, it is also beneficial to be aware of the potential health dangers associated with opening the tank.

Schedule Septic Tank Maintenance

The maintenance of your septic tank on a regular basis helps to avoid sewer backups and costly repairs to your sewer system. You should plan to have your septic tank pumped out every three to five years, depending on the size of your tank and the number of people that reside in your home. The Original Plumber offers skilled septic tank and drain field maintenance and repair services at competitive prices. While it is useful to know where the septic tank is located, it is not required. Our team of skilled plumbers is equipped with all of the tools and equipment necessary to locate your tank, even if you have a vast property.

We are open seven days a week, twenty-four hours a day.

Frequently Asked Questions

A septic system is a system for the management of wastewater. Simply said, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home. Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will fall to the bottom of the tank and the liquids will run out onto your leach field.

How do I know if I have a septic tank?

Even if there are no obvious signs of a septic tank in your yard – such as uneven landscaping – there are a few techniques to assess whether or not your home is equipped with an onsite sewage system. Checking your property records is the most reliable technique to ensure that you are utilizing the correct system. When you acquired your house, you should have received a copy of the septic system map with the property documents as well. Checking your electricity statement is another way to determine this.

If you’re also using well water, it’s possible that you won’t receive one at all.

What do I do once I locate my septic tank?

Once you’ve discovered where your septic tank is, there are a few things you should do. It is critical to clearly mark the position of your septic tank. With our inspection, pumping, and repair services, you can save time whether you need a sewer line cleanout or a septic tank maintenance job completed quickly. Make a note of the location of your tank so that you can find it again if necessary. It should be heavy enough so that it does not fly away in windy conditions. A creative approach to accomplish this without having an unattractive flag or marking in your yard is to use garden décor or a potted plant.

This way, you’ll have it for future reference and will be able to quickly locate the exact position if necessary.

Then contact The Original Plumber to have your septic system maintained on a regular basis. Preventing worse problems and the need for costly repairs down the line may be accomplished via proper septic system maintenance. All of the heavy lifting has been delegated to our team of professionals.

How To Locate a Septic Tank

Customers frequently inquire about the location of a septic tank. Unless your septic tank is equipped with special risers that elevate the lids above ground level, you may need to enlist the assistance of a qualified professional. However, there are a number of things you may do to prepare yourself before calling for assistance. When it comes time to have your septic system repaired, being how to find your own septic system will save you money. Public health records can be obtained by contacting your local health department.

  • These permits should be accompanied by a graphic depicting the location of the septic system’s burying spot.
  • Public Records Request for the County of Nevada Request for Public Records from the County of Placer Examine the findings of your inspection report.
  • Make contact with the construction company that built your home.
  • Find the location of the main sewer line.
  • Locate the 4 inch sewer pipe that runs through your basement or crawlspace and take a measurement of the point at which it leaves the home.
  • By carefully probing the yard every few feet and following the septic pipe across your yard, you should be able to detect any problems.
  • The majority of septic tanks are placed 1 to 3 feet below and are located roughly 10 to 20 feet away from the house.

An electronic metal detector can find the reinforcing bars in a concrete tank if it is built out of concrete.

Please contact us.

We have specialized technology that we can use to pinpoint the location of your tank.

You should make a note of the position of your tank for future reference if you were successful in discovering it.

A riser elevates the septic lid above the ground, making it easier to find and access your septic tank and its contents.

As a result, you will not have to pay a professional to identify and dig up the lids every time your septic system is repaired, which will help to protect your landscape and save you money.

How to Find Septic Tanks

Every septic tank will eventually get clogged with solid waste and will need to be drained and cleaned. Pumping out the septic system on a regular basis is essential to maintaining it in excellent functioning order. But what can you do if you don’t know where the septic tank is? What are your options? How to locate and locate your septic tank will be covered in this section. Septic tanks should not be installed in any one location because each property is unique. Septic tanks are difficult to detect, but there are several principles and indicators that might assist you.

How to Locate Septic Tanks: Using Public Records:

  1. Inquire with the previous owner of the property. This may be the quickest and most convenient method of locating a septic tank. Simply contact the previous owner and inquire as to the whereabouts of his or her septic tank. In spite of the fact that the previous owner should have shared this information with you when selling the home, it is easy to forget normal maintenance data. If you are unable to contact the previous owner or if the previous owner does not know the location of the septic tank, do not give up hope just yet. There are several alternative methods of locating a septic tank
  2. However, Consult the County Records for more information. The county should have a copy of the septic tank installation permit documents for your property on file. This file should include a schematic or map of the property that shows the location of the septic tank. If the septic tank was erected more than a decade ago, the information may or may not be on file. Call a few different septic tank pumping companies in your area. It’s conceivable that your septic tank was installed by a local business or contractor. Check with several businesses to check whether they have your address on file.

How to Identify Septic Tanks on Your Own Septic tanks are hardly the most visually appealing or pleasurable of systems to see. They are installed in such a way that they are hardly visible and are not visually highlighted or exhibited. In the event that your septic tank is actively being concealed, you will have to figure out how to locate it. One method of locating the septic tank is to trace the waste line from the house to the septic tank’s location. Identify where the sewage line departs the home, which is usually in the basement, and then travel to the same location outside the property.

Consider the area where a septic tank is most likely to be found.

  • Usually between 10 and 20 feet away from the structure. It should not be too near for reasons of health and safety. When it comes to building costs, it is preferable to keep excavating to a minimum by not locating it too far away. From the house, it’s all downhill. Gravity is used to transfer waste in the majority of plumbing systems. This is not always the case, however, because certain systems make use of pumps. Is there a well, a stream, or any other site feature on your property that might have an impact on the installation of a septic tank? There cannot be a septic tank in close proximity to wells or the property line. Seek out bald places where there is no grass growth, which might indicate the presence of a shallow-buried septic tank top. Locate any green grass, which may be indicative of a septic tank that is overflowing or leaking
  • Assuming you already know where to go, here’s what you should be looking for now:

How to Locate Septic Tanks Using Visual Indications

  • What is the appearance of a septic tank? Septic tanks are rectangular in shape and measure around 4ft x 8ft. Knowing this, seek for a rectangular depression or a rectangular region of sparse grass growth in a rectangle area of sparse vegetation. When septic tanks are placed shallowly and close to the surface, the outcome is often sparse or uneven grass growth
  • This is due to the fact that they are buried shallowly and close to the surface. Pipes that are unexplained. Air vents and cleanouts are common features of septic systems. If you notice pipes jutting out of the ground, it is possible that they are for the septic system. Copper is not used in the construction of these pipes, which are typically 4 to 6 inches in diameter and composed of cast iron or white or black plastic. Detecting an unpleasant odor implies that you have located the drainfield and that it is failing
  • Wet places that haven’t been explained. if there is an area of your land that is perpetually wet or moist for no apparent reason, it is possible that this is the location of your septic tank. Most of the time, it is accompanied by disagreeable smells. Look for markers such as a stake, stones, or other sorts of objects. In order to indicate the position of the septic tank’s pumpout access, it is customary practice to post a marker. Boxes for electrical equipment. Pumps and grinders are commonly seen in septic tanks that are powered by electricity. If you have an electrical connection or box protruding from the ground distant from the home and are unsure what it is for, it is possible that it is for the septic system
  • Lush green grass
  • Or irrigation system. This might be the case if your property has a single patch with especially lush green grass and you have not watered or fertilized it. If this is the case, the septic tank may be positioned in this location. Unfortunately, that lush green grass indicates that you are experiencing seepage from your septic tank
  • Nonetheless, Random dirt depressions in the earth, each measuring around 2 square feet, which may indicate a former excavation for tank pumping

If you are still unable to locate the septic tank, it is likely that you should contact a professional. A professional sewer tank plumber will locate and service septic systems on a regular basis and will be equipped with the required equipment and knowledge to locate your home’s septic tank swiftly and efficiently. Don’t be tempted to lift the lid or conduct any other work on your septic tank now that you know where to look. Septic tank lids are extremely heavy, and septic tanks emit harmful vapors.

Always get your septic tank serviced by a licensed and insured septic tank plumber.

Post Navigation

There are a few solutions available if the previous homeowner failed to supply this critical information or if you have misplaced your original copy:

  • Your local DHEC office may have a copy of your building permit on file if your house was built within the last five years or fewer, according to the DHEC. A copy of a septic tank permit can be obtained from the local office by any individual or group, regardless of whether or not they own the land in question. Because of this, it is highly recommended that you have as much of the following information as possible ready at the time of your request.
  • Number of the tax map
  • Lot number
  • Block number
  • Address in the physical world
  • When the system was installed or when the house was built (if this information is available)
  • Name of the original permit holder (if any information is available)
  • Name of the subdivision (if the property is located within a subdivision)
  • You may also submit a request for a copy of the permission through our Freedom of Information office, although this is not mandatory. To obtain a copy through the Freedom of Information Office, please complete and submit a copy of the DHEC FOI form. Instructions are given with the application. If feasible, please include the information about the property that is stated above. When looking around your yard, search for manhole covers or lids that have been buried by grass or leaves if your house was constructed before 1990.
See also:  How Did Benni Get Into The Septic Tank? (Question)

Tags

Septic Tank Alerts Septic Tank Alerts

Online Septic Research

The Environmental Services Department of Maricopa County maintains a database that contains all of the county’s existing approved septic systems for the purpose of preservation. Please bear in mind that property owners are responsible for maintaining accurate records of the location and maintenance of their septic system for the duration of the system’s life.

Alteration Permit

An Alteration Permit will be required for onsite systems that have a failing tank or disposal field.

Abandonment Permit

An Abandonment Permit will be required for any onsite systems that are to be abandoned in order to connect to the municipal sewage system or that are to be taken out of operation.

Research

Option 1: You may perform your own study at no cost by using the Online Septic Search Tool (available at no expense). Option 2: You can call the Environmental Services Department and ask for a more in-depth search to be undertaken (fees will apply for research conducted by the department for each parcel).

  • Researchers charge a cost of $30 for research requests that take 3 to 7 business days. Expedited researchers charge a $60 price for research requests that take 1 to 2 business days. Septic Research Request Form.

Keeping Well and Septic System Records

It’s critical to keep track of your own well and septic data. Photograph courtesy of George Hurd of Penn State Extension Being prepared with a “Well File” and a “Septic File,” or other written documents including information on your water system, is a crucial step in safeguarding the health of your family and your water resources. In addition to making it simpler to arrange well, water treatment system, or septic system maintenance, good records may also aid in identifying the root causes of water quality variations.

  • You should keep track of the following: well and septic system installation, permits, maintenance, inspections, pumping, repairs, and water testing.
  • Keep records of service visits if you have water treatment equipment and follow a maintenance plan.
  • Also, keep the manufacturer’s information for any water treatment equipment you use with your well file on hand for reference.
  • Copies of all water quality test results should be maintained on hand in order to track any changes that may occur over time.
  • Your records must also contain a map indicating the position of your well as well as the location of your septic system, which should include the septic tank and drainfield.
  • Locate the location of your well head on your property and mark it.
  • If you do not have access to blueprints, locate the point at which your sewer line exits your home.
  • Your septic tank pumper may also be able to assist you in locating all of the components of your system.

Create several plot plan diagrams with measurements that include a rough sketch of your house, a rough sketch of your septic tank cover, a rough sketch of your drainfield area, a rough sketch of your well, and any other permanent reference points such as trees or large rocks and keep them with your well and septic system records.

It is important to note that a well log is an important source of information for documenting the building of a water supply well, according to the Iowa Department of Natural Resources.

In-depth well logs contain information such as the types and thickness of each geological sequence encountered, the types of materials used in the well’s construction, the construction techniques employed during the well’s installation, and the water levels of the aquifer(s) while at rest and when pumping.

  • The well log is a valuable tool for the well owner, since it may be used to troubleshoot any difficulties that may arise with the well in the future.
  • Individual water well and spring reports, as well as data package downloads, are available online through the PaGWIS.
  • Beginning in 1966, drillers have been obliged to report water well completion information, which includes the location of water wells drilled in Pennsylvania as well as the criteria used in their construction.
  • Go to the PaGWIS website and look for the link that says “Groundwater Records Online” to see if your well records are available on the internet.
  • Records of your well and septic system are essential for maintaining and safeguarding both the health of your home’s water system as well as the health of your family.

If the quality of your water deteriorates, you can take steps to improve it. Your well’s historical water quality data can be used to illustrate the water quality of your well in the past. Having this information will be useful if you ever decide to sell or transfer your property.

How to Find Your Septic Tank

Riverside, California 92504-17333 Van Buren Boulevard Call us right now at (951) 780-5922. Knowing where your septic tank is located on your property is critical to doing routine maintenance on your septic system. Eventually, all septic tanks will become overflowing and will require pumping. When your tank’s lid is difficult to locate, you may be at a loss for what to do or where to look for the lid when you need it. Most septic tanks are designed to be as unobtrusive as possible, making it quite difficult to locate one on your own in most cases.

If you remove the lids yourself, you run the risk of causing a septic system to collapse or a leaky system to transmit bacterial or viral diseases due to filthy circumstances.

Check the Map

Riverside, California 92504 (17333 Van Buren Boulevard). Get in touch with us right now at (951) 780-5922 Knowing where your septic tank is located on your property is critical to doing routine maintenance on your septic tank system. Eventually, all septic tanks will become overflowing and will require pumping out. In cases when your tank’s lid is difficult to locate, you may be at a loss for what to do or where to look for it. Due to the fact that most septic tanks are built inconspicuously, finding one on your own is often quite tough to do.

If you remove the lids yourself, you run the risk of causing a septic system to collapse or a leaky system to transmit bacterial or viral diseases due to the filthy environment.

Pipes Lead the Way

Every septic tank is connected to the main sewage line that runs from your house. You may follow this line all the way from its starting point at the home to the tank’s site. Fortunately for individuals who choose this strategy, there is no digging involved! Simply use a metal rod to probe the ground for the line, then follow it with your eyes closed. It is common for tanks to be positioned 10 to 25 feet from a home’s foundation and to be built of concrete, fiberglass, or polyethylene material.

Look For Signs

For whatever reason you do not have access to a map, or if you do have access to a map but are having difficulty locating the sewage line, you can seek for ground markers to guide you. Small hills or pits that appear to be out of place might be an indication of an earthquake. Even in the presence of grass or other plants, a septic tank with a surface area of 40 square feet will leave a little distortion in the ground, even if the tank is not completely filled. If none of the aforementioned approaches succeed in locating your tank lid, you may always engage the assistance of a knowledgeable specialist.

No matter how you establish the position of your septic system, make a note of it in your records or plainly mark the place with a permanent marker to avoid future complications and problems.

Contact Us Today

We at West Coast Sanitation understand that you are busy and do not have time to deal with septic issues. One of the most effective methods to maintain this balance and ensure that your septic system continues to function properly is to have your tank pumped on a regular basis. If you want assistance in identifying or maintaining your septic system, don’t hesitate to contact us. Please contact us at (951) 780-5922 as soon as possible. If you have any questions, we have specialists standing by to help you resolve them and get your system back up and running.

How to locate your septic tank and your drainfield

Septic systems on-site are used for accepting and treating wastewater in homes that are not linked to the municipal wastewater management system. A septic system is comprised of three components: a septic tank, a drain field, and piping. As a homeowner, it is your responsibility to properly operate and maintain your septic system in order to avoid system failure. For example, depending on the legislation in your area, you may be compelled to pump it on a regular basis. It is impossible to perform maintenance operations, however, if you do not know where the tank is located.

Steps to follow to locate your septic tank and drain field

The contractor that designed and constructed the septic tank on your property should have submitted an as-built diagram with the local health authority before starting work on the project. In the event that you have the contractor’s contact information, you can ask them for a schematic, which you can then use to pinpoint the location of your septic tank. If you do not have a copy of the schematic, you can request one from the local authorities. Depending on whether the installed system included electrical components, the schematic may be available at the regional building department offices.

  1. If you are unable to locate the tank using this diagram, you will need to do more research on the land in order to determine its position.
  2. This pipe is commonly found in the basement of a home, and it is a 4″ black pipe with a cleanout at the bottom.
  3. Simply look for possible access coverings or a structure that might be concealing it.
  4. These pumps are used to remove waste from the building.
  5. It is supposed to be connected to the sewage output pipe.
  6. As soon as you’ve discovered the sewer outlet in your basement, you may use it to figure out where the sewer line departs your home through an outside wall.

As a result, it is probable that the tank will be positioned around the corner from the building. Work your way around the home in a circle, starting at an electrical outlet and continuing until you find the septic tank.

Tips for locating your septic tank

Septic tank lids should be visible from the outside. An underground riser may have been added, which will make it simple to find your septic tank in some instances. However, it is conceivable that the septic tank cover is buried underground, which is especially true for older homes. Following are some pointers to assist you in locating the septic tank in this and other similar situations.

  • It may be possible to discover the septic tank lid underneath using a metal detector if it is buried. Prevent wearing footwear that contains steel or any other metal in order to avoid interfering with the readings of the detector
  • Instead, you can use a flushable transmitter that is flushed down the toilet and then tracked with a receiver. When it comes to septic tanks, the strongest signal will be seen close to the intake region of the tank.

Depending on whether the septic tank is above or below ground, you may have to dig to get to it. Construction materials for septic tanks include concrete, fiberglass, or plastic, and their shapes can range from oblong to cylindrical to rectangular. The majority of modern septic tanks will have their lids positioned in the center of the tank, and the lid should be within three feet of the ground surface in most cases. However, depending on a variety of conditions, such as farming and other human activities on the property, it is conceivable that it will be significantly deeper.

Additionally, you may use a small steel rod to probe the earth in order to pinpoint exactly where the tank is located as you continue digging.

Inspecting the tank

It is critical to thoroughly inspect and evaluate your septic tank and its contents when it has been identified. First and foremost, you may unscrew the lid to inspect the scum and sludge layer beneath it. In addition, the use of tracer dye tablets allows you to check the septic tank without having to dig it up. If you use tracer dye pills, all you have to do is flush them down the toilet and wait for a maximum of two days. Because of the way the tablets dissolve in water, if there is a problem with the septic system, you will see that the leach field has a glowing green hue surrounding it.

It is possible that someone will fall into the tank, causing significant damage or possibly death.

Conclusion

You can identify your septic tank without assistance from a professional, but it is a good idea to have someone who is properly educated in septic tank maintenance examine and maintain your septic tank on your behalf. The effluent filter in your tank should be washed into the open septic tank rather than on the ground in your yard if your tank has one. It may also be a good idea to make a note of the position of the septic tank when it has been discovered. This will be beneficial to anyone else who may require access to the septic tank in the future.

Septic tanks release combustible and hazardous gases, and as a result, they must be located in an open area.

How to Locate Your Septic Tank

It may seem impossible to imagine that one of the largest and most visible elements of your whole plumbing system is also one of the most difficult to locate, but when your property is served by a septic system, this is perfectly true. A strong explanation for this is because septic tanks are huge, unattractive, stink horrible and give off an unwarranted impression of dirt. Not only does burying them underground assist to prevent them from harm, but it also provides you with additional useable space on your property and conceals what would otherwise be a blight on your landscape.

See also:  What Are Acceptable Plant On Top Of A Septic Tank? (Correct answer)

This site is dedicated to assisting you in locating your septic system without the need for any time-consuming digging.

How To Find A Septic Tank: Step By Step

The fact that one of the largest and most visible elements of your whole plumbing system is simultaneously one of the most difficult to locate may seem impossible to believe, but when your property is served by a septic system, this is exactly true! There’s a solid reason for this: septic tanks are huge, unattractive, smell unpleasant, and give off an unwarranted impression of dirt. Not only does burying them underground assist to prevent them from harm, but it also provides you with additional useable area on your property and hides what would otherwise be a blight on your neighborhood.

You may identify your septic system using this blog, which eliminates the need for any time-consuming, labor-intensive digging.

1. Gather Some Helpful Tools

Septic tank location may be made much easier with the use of several simple instruments and techniques. To locate your septic tank, you only need to know the following information: A soil probe is one of the most useful instruments for locating a septic tank. It is a tiny piece of metal that is used to puncture through the earth and detect anything that could be buried underneath. Start at the point where your sewage line exits your home and work your way straight out, inserting your soil probe every two feet along the way.

Using this method, you may also locate the cover for your septic tank.

While we highly advise keeping your cover clean and exposed in the event that you require emergency septic service, we recognize that this is not always the case.

2. Use a Septic Tank Map

If you are a new homeowner who is trying to figure out where your septic tank is, a septic tank map should be included in your inspection documentation.

You can use this information to assist you in pinpointing the exact position of your storage tank. If you don’t have access to this map, there are a few of additional strategies you might employ.

3. Start Ruling Areas Out

The location of a septic tank cannot be constructed in specific areas due to the risk of causing major damage to your property or tank, as specified by local rules. Your septic tank will not be affected by the following:

  • There are some restrictions that state exactly where a septic tank cannot be built in order to prevent major harm to your property or tank from taking place. The following will not be true of your septic tank:

4. Inspect Your Property

If you take a hard look around your land, there’s a high possibility you’ll be able to locate your septic tank without having to do any probing whatsoever. In many circumstances, a septic tank may be identified by a slight dip or slope on your land that cannot be explained by any other means. Due to the fact that the hole that your contractors excavated for your septic tank may not have been exactly the proper size, they proceeded to install the tank anyhow. This is a rather regular occurrence.

When there is a minor divot or depression, it indicates that the hole was too large and that your contractors simply did not fill the depression to level the hole.

The likelihood of your septic tank being discovered in a few specific locations is quite high.

  • Your water well, if you have one (for a variety of reasons that are rather clear)
  • Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built and no one performed a proper inspection before it was built)
  • Any paved surfaces (it won’t be under a driveway, sidewalk, or patio unless they were added after the home was built and no one conducted a proper inspection before it was built)
  • Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built If there is any particular landscaping

5. Inspect Your Yard

Your water well, if you have one (for a variety of reasons that are quite self-explanatory); Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built and no one performed a proper inspection before it was built); any paved surfaces (it won’t be under a driveway unless it was added after the home was built and no one performed a proper inspection before it was built); any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built and no one conducted Landscaping that is distinctive;

  • If your septic tank is overfilled, sewage can leak out into the ground and function as fertilizer for your lawn, resulting in lush green grass. A area of grass that is very lush and green is a good sign that your septic tank is just beneath it
  • Puddles that don’t make sense: If your septic tank is seriously overfilled, it is possible that water will pool on your grass. Another telltale indicator that your septic tank is below ground level is an unexplainable pool of water. Ground that is uneven: When installing septic tanks, it is possible that the contractors will mistakenly create high or low patches on your grass. If you come across any uneven terrain, it’s possible that your septic tank is right there.

The metal soil probe can let you find out for certain whether or not your septic tank is located in a certain area of your yard or not. As soon as your metal soil probe makes contact with the tank, you may use your shovel to dig out the grass surrounding it and discover the septic tank lid.

6. Follow Your Sewer Main/Sewer Pipes

Following your sewage lines is one of the most straightforward methods of locating your septic tank. These pipes have a diameter of roughly 4 inches and are commonly found in the basement or crawlspace of your house. They are not dangerous. Following the pipes from your house out into your yard, using your metal soil probe every 2 feet or so until you reach the tank, is a simple process once they are located. Aside from that, every drain in your home is connected to your sewage main, which in turn is connected to your septic tank.

The likelihood that one of your major sewer lines is located in your basement or crawlspace is high if you have exposed plumbing lines in your basement or crawlspace.

If the line is labeled, it is usually made of plastic or rubber. It is important to determine where this line exits your property and in which direction it is moving, as it often travels straight out to the septic tank itself.

7. Check Your Property Records

Following the path of your sewage lines is one of the most straightforward methods of locating your septic tank. These pipes have a diameter of roughly 4 inches and are typically found in the basement or crawlspace of your home. They are not dangerous. Following the pipes from your house out into your yard, using your metal soil probe every 2 feet or so until you reach the tank, is a simple process once they are discovered. Apart from that, your home’s drainage system includes a septic tank, which is connected to your sewer main through a pipe.

If you have exposed plumbing lines in your basement or crawlspace, there’s a good possibility that one of them is your main sewer line, which may be dangerous.

If the line is identified, it is usually made of plastic.

What to Do Once You Find Your Septic Tank

Upon discovering the position of your septic tank, you should mark its location on a map of your property. Use something to indicate the location of your lid, such as an attractive garden item that can’t be changed, to help you locate it. A birdbath, a rock, or a potted plant are just a few of the possibilities. You are now ready to arrange your septic tank inspection and pumping service. Contact us now! If you have any more concerns regarding how to locate your septic tank, or if you want septic tank servicing, please contact The Plumbing Experts at (864) 210-3127 right now!

3 Easy Ways To Find Your Septic Tank

Upon discovering the position of your septic tank, you should mark the site on a map of your property. A ornamental garden element that can’t be readily relocated should also be used to designate the location of the lid when it’s closed. A birdbath, a rock, or a potted plant are just a few examples of what you might use. The time has come for you to arrange for a septic tank checkup and pumping service. Call The Plumbing Experts at (864) 210-3127 if you have any more concerns about how to locate your septic tank or if you want septic tank servicing right away.

Check Property Records

Following the discovery of your septic tank, you should mark its location on a map of your yard. A colorful garden item that cannot be readily changed should be used to designate the placement of the lid as well. A birdbath, a rock, or a potted plant are some of the alternatives. The time has come for you to arrange for a septic tank checkup and pumping service! To learn more about how to locate your septic tank, or if you want septic tank servicing, please contact The Plumbing Experts at (864) 210-3127 now!

Look For Telltale Signs

A bald area on your grass might serve as an obvious clue of the position of your septic tank. In contrast, an area of lush grass beside the septic tank might be a symptom of a deteriorating drain field, which would indicate that the tank is collapsing. It is possible that an unexpected rise in the terrain indicates the location of your septic tank. If there are no visible traces of the tank, you can carefully probe the earth with a metal probe to detect any subsurface pipes or lids that may be leading to it.

As a general rule, the top of the tank will be between five and twenty-five feet away from the house, so probe every two feet to cover the most amount of territory.

Ask A Professional

If you are unable to locate the septic tank on your own, consulting with a local septic tank firm might be a convenient and cost-effective solution. Who knows, they could have even performed maintenance on your property’s tank before you purchased it. In any case, a septic tank specialist will be able to find your tank in a short amount of time. It is also beneficial to establish a relationship today since it will be beneficial in the future should you want Septic Tank Cleaning or Septic Tank Repair services.

Check out our septic system maintenance guidelines for more information on how to keep your home’s sewage system functioning smoothly and efficiently.

Locating Your Septic Tank

We receive several phone calls from consumers who want to know where their septic tank is located on their property. In the absence of a particular riser that elevates the lid of the septic tank above ground level, it may be difficult to discover your septic tank in the first place. There are, however, a few things that you may do on your own to find your septic system to save money. Having the ability to recognize your system now will save you money in the long run. The first thing you should do is contact your local health agency to see if any public records are available.

A public records request can be filed with the health department if the department does not have a record of the permits.

If you are unable to identify the septic tank using these methods, you might attempt to locate it on your own land.

Beginning in the basement or crawl area and exiting out the side of your property, the main sewage line is responsible for draining your whole house.

Then, on the outside of the home, look for the same area as before.

If you encounter any form of resistance, be cautious not to press too hard.

They are normally 10 to 20 feet away from the house and are buried around three feet below ground level in the majority of cases.

We have specialized equipment that will help us find your tank. While this will necessitate your payment, you will be aware of the location of your septic system in case you require it in the future. Septic Service Pro has provided this advertisement.

Leave a Comment

Your email address will not be published. Required fields are marked *