What Is The Uw Condition For Septic Tank? (TOP 5 Tips)

How is wastewater treated in a septic system?

  • Pipes carry wastewater from the septic tank to the chambers. In the chambers, the wastewater comes into contact with the soil. Microbes on or near the soil treat the effluent. The drip distribution system is a type of effluent dispersal that can be used in many types of drainfields.

Under what conditions do we make septic tank?

A septic tank is appropriate where there is a way of dispersing or transporting the effluent. Effluents form septic tanks can be soil infiltrated in soak pits, a leach field or mounds.

How do you evaluate a septic system?

The inspector may use a dye test during this part of their inspection. In a dye test, the inspector will introduce dye into the water that is being drained to see how much of it enters the septic tank. From there, the septic tank will get pumped and the inspector will check for any backflow from the absorption area.

How do I add good bacteria to my septic tank?

Flush a packet of brewer’s dry yeast down one toilet on the bottom floor of your house once a month. The yeast will help add “good” bacteria to your septic tank and break down waste.

What PH should septic tank be?

PH Levels should be maintained between 6 and 9 to allow for the Good Bacteria to thrive within a waste water environment.

What are the three 3 bacteria that separates by septic tank?

Septic tanks work by allowing waste to separate into three layers: solids, effluent and scum (see illustration above). The solids settle to the bottom, where microorganisms decompose them. The scum, composed of waste that’s lighter than water, floats on top.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  • Your Drains Are Taking Forever.
  • Standing Water Over Your Septic Tank.
  • Bad Smells Coming From Your Yard.
  • You Hear Gurgling Water.
  • You Have A Sewage Backup.
  • How often should you empty your septic tank?

How do I check my septic tanks sludge level?

To measure the sludge layer:

  1. Slowly lower the tube into the septic tank until it touches the bottom of the tank.
  2. As the device is slowly pulled out of the water, the check valve closes capturing a liquid/solid profile of the septic tank water. The thickness of the sludge layer can be measured.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

How do you check an old septic tank?

While the septic tank is open, look for evidence of places where ground water might be leaking into the tank (DO NOT ENTER THE SEPTIC TANK) – and check the condition of the septic tank inlet and outlet baffles to be sure they are in place. If the septic tank is not empty inspect the sewage and effluent levels.

Can you put too much bacteria in your septic tank?

Too much of a good thing can cause problems. A septic system relies on the correct balance of bacteria to do its job. An overpopulation of bacteria can deplete the oxygen in the septic tank and turn the environment septic. A septic, septic system is one in which the ecosystem within the tank is out of balance.

Is beer good for septic tanks?

Do not flush meat, buttermilk, yeast, vegetables, beer etc. down your drain to “Feed” your septic system. This will kill the good bacteria in your septic system.

How do I keep my septic tank healthy?

Do’s and Don’ts when maintaining your septic system

  1. Regularly inspect and maintain your septic system.
  2. Pump your septic tank as needed.
  3. Keep your septic tank lids closed and secured.
  4. Be water-wise.
  5. Direct water from land and roof drains away from the drainfield.
  6. Landscape with love.
  7. Keep septic tank lids easily accessible.

How do you balance the pH in a septic tank?

Calcium – the rationale behind using calcium in the chemical additives is that calcium will raise the pH levels of the septic tank thereby allowing the bacteria to function properly. The septic tank usually decreases the pH naturally due to the anaerobic activity so calcium can bring the pH back to optimum levels.

What to do after septic tank is pumped out?

After you have had your septic tank pumped by a trusted septic company, there are some things you can and should do as the septic system owner.

  1. 1) Get on a Schedule.
  2. 2) Take Care of the System.
  3. 3) Know the Parts of Your System.
  4. 4) Check Other Possible Issues.

How do you clear a blocked septic tank?

Bring a pot of hot water just to the boiling point and then pour it down the clogged drain. The hot water will help to loosen any grease or soap causing the clog, while the rush of water can help to loosen hair clogs. If hot water does not work, the next method you can try is a mixture of baking soda and vinegar.

Septic Tanks-Are There Harmful Effects Of Water Softener Discharges On Household Septic Tanks

Here are the answers to that question, as well as information on the consequences of utilizing a water softener in conjunction with a septic system. It is not true that the regeneration outputs from water softeners represent a threat to septic systems or the leach field. Studies have shown that water softener regeneration wastes do not interfere with the percolation of soil in the septic tank system drain field, but that the polyvalent water hardness cations in the regeneration discharges actually improve soil percolation, particularly in fine-textured soils, as a result of their presence in the regeneration discharges.

The results of this study were published in the late 1970s.

A more recent review of this research report was conducted by the United States Environmental Protection Agency, and an expert in on-site waste treatment stated in October 1993 that he “does not believe that the conclusions of the earlier study would change because the chemistry and physics of soils have not changed.” He goes on to explain that he is certain that this effort will continue to be of high scientific quality.

These investigations have definitely demonstrated that waste effluents from water softeners do not cause difficulties for septic tanks.

  • The installation has not resulted in any damage or hazard, but it has benefited many households with convenience and financial savings.
  • Even in Montmorillinite clay soils, the states have decided that the discharge of brine wastes from water softening equipment has no major impact on the permeability of soils appropriate for use with soil absorption systems.
  • The addition of salt to a septic system through the use of soft water has been shown to have favorable impacts on the bacteria’s ability to digest waste.
  • In fact, they produce less trash per unit of time and at a slower rate of addition than waste from automated washers.

Several studies by the University of Wisconsin and the National Sanitation Foundation have demonstrated that when the sodium content from the softener regeneration cycle is released into the soil via a septic system, the effect is an improvement in the soil’s percolation rather than a disadvantage.

  • Fred P Miller, Professor of Soil Science at the Department of Agronomy at the University of Maryland, who reached the same result.
  • It has been estimated that the average household uses between 50 and 75 percent less soap than the average professional cleaner.
  • A well-known reality is that many homeowners do not properly maintain their septic systems.
  • Aside from that, having soft or stain-free water on hand makes it easier for the homeowner to keep their materials clean while also reducing the amount of water utilized.
  • Many people are under the idea that water conditioning equipment regenerates on a regular basis and that it adds a significant amount of sodium salts to the waste water.
  • It’s important to note that this is not the case; a typical household of four persons would require softener regeneration around four to five times every week.
  • The septic tank research clearly demonstrates that when water conditioning effluent is released into properly designed private septic systems, there are no negative consequences to the environment.

To soften or not to soften septic tanks is a question of whether to soften or not.

However, with more than 20 million on-site residential disposal systems in operation, this is a topic that many homeowners have questioned.

After careful consideration, the answer is NO – soften your voice with assurance.

See also:  What To Do With Tampons With A Septic Tank? (Solution found)

An underground concrete or steel tank, placed at a certain distance from the house and below the frost line, collects the waste from the plumbing system of a home’s plumbing system.

The heavier particles sink to the tank’s bottom as soon as the effluent enters, whereas the more buoyant chemicals rise to the surface as soon as it leaves.

An anaerobic process is a bacterial action that takes place in the absence of oxygen, and it is defined as follows: Another vented system operates in a similar manner, but the breakdown is aerobic, requiring the presence of oxygen.

Perforated, loosely linked pipes carry the water to a distribution box, where it is routed to a drainage field by gravity.

Pipes are typically installed in gravel or loose rock beds to improve the dispersion of the water and to prevent clogging.

The opposite side of the coin is concerned with water before it reaches the faucet and includes the water softening system.

Ion exchange resin interacts with the influent water, exchanging sodium ions for calcium and magnesium ions, and the process is repeated.

Water becomes “hard” due to the presence of these ions; substituting the calcium and magnesium ions for sodium or potassium ions results in the water being “soft.” It is important to discharge some surplus regenerant salt (sodium chloride or potassium chloride) in order to fuel the regeneration reaction during the regeneration cycle.

  1. Assumptions that are incorrect: When softened water became available in the 1970s, a number of counties and states grew worried about the impact it might have on septic systems.
  2. In the scientific community, it is well understood that bacterial life forms are harmed by environments that contain either too much or too little salt.
  3. The second source of worry was that the backwash flow rate during regeneration would bring water into the tank at a rate quicker than the tank could cope with.
  4. In other words, “unprocessed waste water” would be discharged into a drainage field without being treated.
  5. Based on agricultural studies of irrigation systems with high salt concentration, this assumption has been made about sodium.
  6. As a result of these beliefs, legislation was established in certain jurisdictions prohibiting the use of softened water in septic systems.
  7. These organizations carried out extensive research to either validate or disprove their claims.

As a consequence of scientific testing, it has been demonstrated that the assumptions given above are incorrect in their entirety.

Researchers discovered that adding salt to the system improved the bacterial habitat by bringing it closer to the optimum range.

Second, the volume of backwash generated during regeneration did not interfere with the time required for bacterial treatment of effluent, as it was readily contained within the limits of the tank’s capability.

Concerns about soil absorption rates and salt concentrations were also dispelled.

Strangely enough, it had a beneficial effect on some soil conditions.

It has long been known that increasing the porosity of clay soils with gypsum, a high-calcium mineral, would be beneficial.

Obviously, this is fantastic news for anyone who has had to deal with discolored dishes or clothes, or who has had to deal with precipitate buildup in pipes as a result of hard water usage.

Homeowners may take use of all of the benefits of soft water without having to worry about it interfering with the effectiveness of their domestic sewage system.

Marathon > Departments > Conservation Planning Zoning > Zoning and Regulatory Services > POWTS Maintenace Program

The sort of wastewater treatment system you have will determine the level of maintenance required: Septic Tank Systems are a type of sewage disposal system. In addition to holding tank systems, most private wastewater treatment systems will include one or more septic tanks as part of their design (for example, conventional systems and mound systems both have septic tank). septic tank system maintenance involves having the tank(s) visually inspected by a fully licensed POWTS expert at least once every three years, as well as having the tank(s) pumped as necessary (View contact lists of licensed POWTS professionals in Marathon County.) A visual examination will identify whether any sewage or wastewater is leaking onto the ground, will examine the condition of the tank(s), and will check to see that the aboveground tank lids are correctly closed or secured.

  1. A visual inspection will not detect any sewage or wastewater leaks.
  2. NOTE: The majority of septic tank systems constructed after 2000 will have a management plan in place, which may need additional maintenance such as filter cleaning.
  3. In order to comply with the CPZ regulations, a report from the POWTS professional on behalf of the property owner must be sent electronically to the Marathon County CPZ Department office every time a septic tank system is inspected, maintained, or serviced.
  4. CPZ Department will issue a notification to the property owner informing them that the legally necessary maintenance of the septic tank system is due and that the requirements of the POWTS code have not been satisfied if the maintenance is not reported on time by the property owner.

Systems for storing liquids Due to the fact that they are only permitted when no other sort of wastewater treatment system can be constructed, holding tanks in Marathon County are less popular than septic systems there (for example, where groundwater or bedrock are found at or very near the ground surface).

  1. Because these systems do not include any components for treating or redirecting wastewater, any sewage that collects in the tank must be properly pumped out and carried away to a permitted disposal location before being disposed of.
  2. The volume of water you consume and the capacity of your holding tank determine the frequency with which you must pump your system.
  3. Of course, water conservation measures will aid in reducing the frequency with which pumps are used.
  4. Nota bene: It is not allowed for property owners to empty their own holding tanks or to dump any waste, including “gray water” — that is, water from their own laundry, sinks, showers, and other similar sources — on or into the ground.
  5. It will also examine the tank’s condition and ensure that the above-ground tank covers are correctly locked or secured.
  6. Pumpers are required to notify the County if any locks are missing.
  7. The POWTS professional on behalf of the property owner must send an electronic report to the CPZ Department’s office for any holding tank system inspection, maintenance, or pumping that occurs on the property.
  8. CPZ Department will send a notification to the property owner informing them that the legally necessary maintenance of the holding tank system is due and that the property owner has failed to comply with the POWTS code requirements if the repair is not reported in a timely manner.

It is also mandatory that owners of holding tank systems enter into an agreement with their pumper, known as a Servicing Contract. A new contract must be prepared and submitted to the CPZ Department if there is a change in property ownership or the pumper responsible for the property.

Water softener discharges do harm septic systems – And the problem is easy to solve

The following types of wastewater treatment systems have different maintenance requirements: Drainage Systems for Septic Tanks (also known as Septic System Drainage Systems) A septic tank will be used in most private wastewater treatment systems, with the exception of holding tank systems (for example, conventional systems and mound systems both have septic tank). septic tank system maintenance involves having the tank(s) visually inspected by a fully licensed POWTS expert at least once every three years, as well as having the tank(s) pumped when needed (View contact lists of licensed POWTS professionals in Marathon County.) During a visual examination, it will be possible to detect whether or not any sewage or wastewater is leaking on to the ground.

  1. If the examination discovers a combined amount of sludge and scale equal to or greater than one-third of the tank’s capacity, it is necessary to pump out the tank(s).
  2. Please contact the CPZ Department by phone (715.261.6000) or email ([email protected]) if you need assistance locating the appropriate management plan.
  3. Reports must be submitted within 30 days after the conclusion of the project.
  4. If Marathon County does not receive the required completed report from the POWTS professional, the maintenance requirements will not be met (and code violations will be in effect).
  5. Holding tank systems do nothing more than collect and store the wastewater produced by your home or business.
  6. If the holding tank is nearly full, an alarm will sound, signaling that it is time to call for service.
  7. The average amount of wastewater produced by a person per day is approximately 60 gallons.
See also:  How Do They Clean Out A Septic Tank? (Correct answer)

Holding tank system maintenance entails having a Certified Pumper empty your tank every time it fills up with water.

In Marathon County, you can find a list of Certified Pumpers who can help you out.

If a cover is not kept in place and locked or secured, it is the property owner’s responsibility to ensure that no one else can gain access.

Pumpers are required to report to the Central Planning and Zoning Department the date, number of gallons pumped, and identity of the pumper.

Reports must be submitted within 30 days after the conclusion of the project.

A Servicing Contract with a pumper is also required for owners of holding tank systems, in addition to the above. A new contract must be completed and submitted to the CPZ Department whenever there is a change in property ownership or the pumper.

Private Sewage System Maintenance and Management Program

Owners of private sewage systems are required to engage in a Private Sewage System Maintenance and Management Program under the provisions of the Jackson County Private Sewage System Ordinance Sections 15.35 and 15.36, as well as DCOMM 83 and 84 of the Wisconsin Administrative Code. Pumping of the septic tank by a licensed pumper is required for all sewage systems within 36 months of the date of installation and at least once every 36 months afterwards, or when the sludge level exceeds one-third of the liquid capacity of the tank, whichever occurs first.

This rule is intended to safeguard and promote public health, safety, and groundwater quality, as well as to potentially extend the life of the private sewage disposal system, as well as to reduce the risk of contamination.

The following is the maintenance schedule established by the municipality:

Septic Maintenance Notice Schedule
Date Sent to Landowner Municipality Compliance Deadline
April 1st Adams, Albion, Brockway, City of Black River Falls June 30th
May 1st Bear Bluff, City Point, Knapp, Komensky, Manchester, Millston July 31st
June 1st Curran, Franklin, Hixton, Irving, Melrose, North Bend, Springfield, Village of Melrose, Village of Taylor August 31st
July 1st Alma, Cleveland, Garden Valley, Garfield, Northfield, Village of Merrillan September 30th

Owners of private sewage systems are required to engage in a Private Sewage System Maintenance and Management Program under the provisions of the Jackson County Private Sewage System Ordinance Sections 15.35 and 15.36, as well as DCOMM 83 and 84 of Wisconsin Administrative Code. Pumping of the septic tank by a professional pumper is required for all sewage systems within 36 months of the date of installation and at least once every 36 months afterwards, or when the sludge level reaches one-third of the tank’s liquid capacity.

With this requirement, the public’s health, safety, and groundwater quality will be safeguarded and improved, and it is also possible that the private sewage disposal system’s lifespan will be extended.

As outlined below, the municipality has established a maintenance schedule:

How to Care for Your Septic System

Septic system maintenance is neither difficult or expensive, and it does not have to be done frequently. The maintenance of a vehicle is comprised of four major components:

  • Inspect and pump your drainfield on a regular basis
  • Conserve water
  • Dispose of waste properly
  • And keep your drainfield in good condition.

Inspect and Pump Frequently

Inspection of the ordinary residential septic system should be performed by a septic service specialist at least once every three years. Household septic tanks are normally pumped every three to five years, depending on how often they are used. Alternative systems that use electrical float switches, pumps, or mechanical components should be examined more frequently, typically once a year, to ensure that they are in proper working order.

Because alternative systems contain mechanical components, it is essential to have a service contract. The frequency with which a septic tank is pumped is influenced by four key factors:

  • The size of the household
  • The total amount of wastewater produced
  • The amount of solids present in wastewater
  • The size of the septic tank

Service provider coming? Here is what you need to know.

When you contact a septic service provider, he or she will inspect your septic tank for leaks as well as the scum and sludge layers that have built up over time. Maintain detailed records of any maintenance work conducted on your septic system. Because of the T-shaped outlet on the side of your tank, sludge and scum will not be able to escape from the tank and travel to the drainfield region. A pumping is required when the bottom of the scum layer or the top of the sludge layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the bottom of the outlet.

In the service report for your system, the service provider should mention the completion of repairs as well as the condition of the tank.

An online septic finder from the National Onsite Wastewater Recycling Association (NOWRA) makes it simple to identify service specialists in your region.

Use Water Efficiently

In a normal single-family house, the average indoor water consumption is about 70 gallons per person, per day, on average. A single leaking or running toilet can waste as much as 200 gallons of water each day, depending on the situation. The septic system is responsible for disposing of all of the water that a residence sends down its pipes. The more water that is conserved in a household, the less water that enters the sewage system. A septic system that is operated efficiently will operate more efficiently and will have a lower chance of failure.

  • Toilets with a high level of efficiency. The usage of toilets accounts for 25 to 30% of total home water use. Many older homes have toilets with reservoirs that hold 3.5 to 5 gallons of water, but contemporary, high-efficiency toilets consume 1.6 gallons or less of water for each flush. Changing out your old toilets for high-efficiency versions is a simple approach to lessen the amount of household water that gets into your septic system. Aerators for faucets and high-efficiency showerheads are also available. Reduce water use and the volume of water entering your septic system by using faucet aerators, high-efficiency showerheads, and shower flow restriction devices. Machines for washing clothes. Water and energy are wasted when little loads of laundry are washed on the large-load cycle of your washing machine. By selecting the appropriate load size, you may limit the amount of water wasted. If you are unable to specify a load size, only complete loads of washing should be performed. Washing machine use should be spread throughout the week if at all possible. Doing all of your household laundry in one day may appear to be a time-saving strategy
  • Nevertheless, it can cause damage to your septic system by denying your septic tank adequate time to handle waste and may even cause your drainfield to overflow. Machines that have earned theENERGY STARlabel consume 35 percent less energy and 50 percent less water than ordinary ones, according to the Environmental Protection Agency. Other Energy Star appliances can save you a lot of money on your energy and water bills.

Properly Dispose of Waste

Everything that goes down your drains, whether it’s flushed down the toilet, ground up in the trash disposal, or poured down the sink, shower, or bath, ends up in your septic system, which is where it belongs. What you flush down the toilet has an impact on how effectively your septic system functions.

Toilets aren’t trash cans!

Your septic system is not a garbage disposal system. A simple rule of thumb is to never flush anything other than human waste and toilet paper down the toilet. Never flush a toilet:

  • Cooking grease or oil
  • Wipes that are not flushable, such as baby wipes or other wet wipes
  • Photographic solutions
  • Feminine hygiene items Condoms
  • Medical supplies such as dental floss and disposable diapers, cigarette butts and coffee grounds, cat litter and paper towels, pharmaceuticals, and household chemicals such as gasoline and oil, insecticides, antifreeze, and paint or paint thinners

Toilet Paper Needs to Be Flushed! Check out this video, which demonstrates why the only item you should flush down your toilet are toilet paper rolls.

Think at the sink!

Your septic system is made up of a collection of living organisms that digest and treat the waste generated by your household. Pouring pollutants down your drain can kill these organisms and cause damage to your septic system as well as other things. Whether you’re at the kitchen sink, the bathtub, or the utility sink, remember the following:

  • If you have a clogged drain, avoid using chemical drain openers. To prevent this from happening, use hot water or a drain snake
  • Never dump cooking oil or grease down the sink or toilet. It is never a good idea to flush oil-based paints, solvents, or huge quantities of harmful cleansers down the toilet. Even latex paint waste should be kept to a bare minimum. Disposal of rubbish should be avoided or limited to a minimum. Fats, grease, and particles will be considerably reduced in your septic tank, reducing the likelihood of your drainfield being clogged.
See also:  What Happens To The Solids In A Septic Tank? (Solution)

Own a recreational vehicle (RV), boat or mobile home?

If you have ever spent any time in an RV or boat, you are undoubtedly familiar with the issue of aromas emanating from sewage holding tanks.

  • The National Small Flows Clearinghouse’s Septic System Care hotline, which may be reached toll-free at 800-624-8301, has a factsheet on safe wastewater disposal for RV, boat, and mobile home owners and operators.

Maintain Your Drainfield

It is critical that you maintain the integrity of your drainfield, which is a component of your septic system that filters impurities from the liquid that emerges from your septic tank once it has been installed.

Here are some things you should do to keep it in good condition:

  • It is critical that you maintain the integrity of your drainfield, which is a component of your septic system that filters impurities from the liquid that exits your septic tank. You should perform the following to keep it in good condition:

Septic System Information and Care

When municipal sewer service is not available, a septic system that has been properly constructed and maintained is an excellent option for treating wastewater and protecting groundwater quality. A typical septic system is comprised of two key components: the septic tank and the drainfield (or leach field). Waste from toilets, sinks, washing machines, and showers is channeled into a septic tank, which is a holding tank that is typically constructed of pre-cast concrete or fiberglass and is proportioned according to the projected wastewater flow from a given-sized house or commercial establishment.

  • In the first stage of wastewater treatment, anaerobic bacteria (bacteria that can survive in an oxygen-free environment) break down solids into liquids and generate gas that is vented through the building’s plumbing vent stack.
  • The lack of oxygen inside the septic tank also has the added benefit of deactivating some of the disease bacteria that are prevalent in sewage.
  • Because it allows aerobic (oxygen-using) bacteria to continue deactivating the disease germs that remain in the wastewater, the drainfield serves as a secondary treatment facility for sewage.
  • Evaporation of water also occurs through the layer of soil that surrounds the drainfield.
  • That way, enough permeable or unsaturated soil is available to filter the wastewater before the remainder of it gets into the groundwater table and underlying aquifer.
  • In certain instances, modern wastewater treatment systems that “aerate,” or add oxygen to the wastewater, may be necessary to treat the effluent.

Septic System Care

Don’t flush cigarette butts, tampons, condoms, or any other indigestible things down the toilet or down the sink drain. Consequently, the exit filter or drainfield will become clogged. Never throw grease down the drain since grease cannot be digested by the septic system and will cause it to become clogged! rather than dumping it in the garbage, pour it into an empty container or bottle and throw it away. Make sure you don’t use excessive amounts of bleach or other cleaning agents in your septic tank since doing so will interfere with the bacterial operation inside the tank.

  1. Instead of doing numerous loads of laundry back-to-back, stretch your wash loads out over the course of the week to reduce the amount of water that the septic system has to treat (a normal wash load consumes between 60 and 90 gallons each load!).
  2. Roots from trees and plants will grow into the drainlines and cause them to get obstructed.
  3. Driving over your drainfield can cause the pipes to become crushed or the dirt surrounding them to become compacted, and driving over your septic tank can cause the lid to fracture or even fall apart!
  4. Consider the installation of water-saving showerheads, toilets, and other water-saving appliances in your home.
  5. Septic tanks should be pumped out every four to five years, according to the Florida Department of Health, in order to prevent the buildup of sludge in the tank over time.
  6. Stoppages and overcrowded drainfields are caused by leaking toilet flapper valves, which can allow hundreds of thousands of gallons of waste water to enter your septic system each day.
  7. In addition to providing you with many useful suggestions and information, our Environmental Health Professionals can also assist you extend the life of your existing septic system.

If you would like more information on the operation of traditional or sophisticated wastewater treatment systems, or if you have any questions about maintaining your septic system, please call us at (386) 758-1058.

COVID Vaccine

Pediatric Vaccine Clinics for Children Ages 5-17 Public Health Clinics for Children Ages 12 and Up

Sheboygan County Public Health Vaccine Hotline: 920-395-9890
  • What Parents and Guardians Should Know
  • Vaccine Facts for Children 5-11 Years Old
  • What Parents and Guardians Should Know

Moderna is only available to those who are 18 years old or older. Johnson and Johnson – Available to those who are 18 years old or older.

Who can get a booster dose?

Everyone above the age of 12 can receive a booster dosage to ensure the greatest possible protection against COVID-19 and its circulating variations. It is strongly suggested that those who are at the highest risk for severe illness, such as those who are 18 years or older and reside in a long-term care facility, as well as those who are 50 years or older, receive booster doses of the medication. In order to receive your COVID-19 booster dosage, you must be 12 years old or older. – At least 5 months have passed since you had your last dose of your Pfizer or Modernaprimary vaccination regimen.

For those who are at least 18 years old, they can choose which vaccine they want as a booster dose, regardless of which vaccine they received in their primary series(12-17 year olds are currently only eligible for a Pfizer booster dose).

In the meanwhile, booster dosages for children aged 5-11 have not yet been approved**

Who should get an additional dose?

The Food and Drug Administration (FDA) has revised the emergency use authorizations (EUAs) for the Pfizer and Moderna COVID-19 vaccines to allow for the administration of extra doses to very particular populations. It is only possible to receive an additional dose of mRNA COVID-19 vaccination if you are in one of the following age groups. The administration of a second dosage is suggested for this group because they may not have accrued enough, or any, protection following the initial series.

  • Have been undergoing aggressive cancer therapy for tumors or malignancies of the bloodstream. Awaiting the results of an organ transplant and taking medication to suppress the immune system
  • • Have had a stem cell transplant within the previous two years
  • • Have been prescribed medication to suppress the immune system
  • A primary immunodeficiency of moderate or severe severity (such as DiGeorge disease or Wiskott-Aldrich syndrome)
  • HIV infection that is advanced or untreated
  • High-dose corticosteroids, alkylating agents, antimetabolites, transplant-related immunosuppressive medicines, cancer chemotherapeutic treatments categorized as very immunosuppressive, tumor-necrosis factor (TNF) blockers, or other drugs that may depress your immune system are all recommended.

Vaccines.gov: Find a COVID-19 Vaccine near you

We encourage you to leave a message at 920-395-9890 if you are unable to arrange an appointment with a physician online and require assistance arranging an appointment with local doctors. One of our patient advocates will return your call and assist you.

General Resources for Vaccine:

  • Recommendations from the Centers for Disease Control and Prevention for fully vaccinated individuals
  • It is now possible to contact the COVID-19 Vaccine Assistance Hotline at 844-684-1064. You can also send an email to [email protected] if you have any general vaccination inquiries. DHS COVID-19 Vaccine Information Page What You Should Know About the COVID-19 Vaccines
  • What You Should Know About the COVID-19 Vaccines
  • Frequently Asked Questions from the Centers for Disease Control and Prevention
  • Process for Vaccine Testing and Approval at the Centers for Disease Control and Prevention
  • Tracking the COVID-19 vaccine
  • Emergency Use Authorization
  • COVID-19 vaccine tracking The Centers for Disease Control and Prevention (CDC) is ensuring the safety of COVID-19 vaccines in the United States.

Leave a Comment

Your email address will not be published. Required fields are marked *