What Is The Size Of A Standard Concrete Septic Tank? (Correct answer)

A typical residential septic tank is usually about 4.5 feet wide x 8.0 feet long x 6 feet tall.

  • To give you a basic idea of tank dimensions, a concrete tank holding 750 gallons would be approximately 8 feet long, 5 feet wide, and 4 1/2 feet tall. A reputable septic tank installer in your area will know the local codes and can advise you on what septic tank sizes are required for your home.

How big is a concrete septic tank?

What sizes do concrete septic tanks come in? Standard tank sizes are 1000 gallon, 1250 gallon, and 1500 gallons nationwide. In New Hampshire 1250 gallons is by far the most common tank that goes into the ground.

What are the dimensions of a 750 gallon cement septic tank?

750 Gallon Septic Tank – Single Compartment. 60”D x 51”H x 92”L.

What are the dimensions of a 2500 gallon concrete septic tank?

2500 GALLON SEPTIC TANK LENGTH 168″, WIDTH 81″, HEIGHT 72″, WEIGHT 18,842 LBS.

How do I determine the size of my septic tank?

The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.

How often should a 2000 gallon septic tank be pumped?

The size of the tank is one determining element regarding how often it ought to be pumped. For a household of 4 with a 1,000-gallon tank, it’s advised that it be pumped every 2.6 years, but for a 1,500-gallon tank, the time can be extended to 4.2 years and up to 5 years for a 2,000-gallon tank.

How often does a 1000 gallon septic tank need to be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

How big is a 500 gallon concrete septic tank?

500 Gallon Chlorine Contact Tank Overall Length: 79” Overall Width: 48” Height to center line of inlet: 48 ” Height to center line of outlet: 45”

Sizes of Septic Tanks & Shapes

Most septic tanks are built of fiberglass, plastic, or reinforced concrete, with certain exceptions. Metal tanks are also available, but because of their tendency to corrode quickly, they are not normally advised. Septic tanks are available in a variety of shapes, including rectangular, round, and oval, however the design of a septic tank does not normally alter its operation. When selecting a septic tank, the most critical consideration is ensuring that the tank is the appropriate size for your home’s needs.

Concrete Tank Construction

Concrete septic tanks are large and heavy, and their form is commonly rectangular. They’re often built in one of three ways: with a mid-seal, a top-seal, or a monolithic construction. Mid-seal tanks are made up of two sections that are bonded together with mastic sealant to form one unit. A top-seal tank is a one-piece tank with a concrete cover that is attached to the tank. Monolithic cast tanks are constructed in a factory as a single unit, making them more waterproof than other forms of concrete tanks, but they are also more expensive than other types of concrete tanks.

Fiberglass and Plastic Tanks

In circular or capsule-like designs, fiberglass and plastic tanks have a nearly impenetrable waterproof seal and are therefore ideal for use in the marine environment. They are more expensive than concrete units, but because these tanks are formed as a single piece, there are no seams, the tanks are lightweight, and they are more resistant to impact cracks than concrete tanks, according to Atanis Water Tank Co., Ltd. Although they are more expensive than concrete units,

A Range of Tank Sizes

Septic tank capacities are measured in gallons, and are determined by the quantity of sewage that the tank can contain in total. It is necessary for septic tanks to store at least two days’ worth of sewage from your residence in order for the solids to be adequately separated from the liquids before the liquids are allowed to enter the absorption area. The size of the tank is determined by the number of bedrooms in your home. Standard tank sizes are generally 1,000, 1,250, and 1,500 gallons, and they are sufficient for the majority of residences in the United States.

A four-bedroom home requires a tank with a minimum liquid capacity of 1,250 gallons, while a five-bedroom residence requires a tank with a minimum liquid capacity of 1,500 gallons.

Estimating Your Needed Tank Size

The size of the tank is computed using a straightforward formula, while other considerations, such as the soil type, must be taken into consideration. Therefore, it is important to have a professional analyze the site and your property in order to decide the optimal size of tank for your needs and requirements. According to the University of Missouri Extension, to obtain a sense of the minimum size required for your home, multiply 150 gallons each bedroom by two, and then double the total by two to account for the 48-hour retention time required.

Assuming your property has more than six bedrooms, or five bedrooms plus a hot tub, you would multiply 150 times 6, and the resultant figure (900) would be increased by two to give you a minimum liquid capacity of 1,800 gallons.

Concrete Septic Tanks Are Probably The Best Option — Build With a Bang

The size of the tank is computed using a straightforward formula, however other considerations, such as the kind of soil, must be taken into consideration in the process. In order to decide the appropriate size of tank for your purposes, it is advisable to have an expert analyze the site and your property. According to the University of Missouri Extension, to obtain an estimate of the minimum size necessary for your home, multiply 150 gallons each bedroom by two and then double the total by two to account for the mandatory 48-hour retention duration.

Assuming your property has more than six bedrooms, or five bedrooms plus a hot tub, you would multiply 150 times 6, and the resultant figure of 900 would be increased by two to give you a minimum liquid capacity of 1,800 gallons.

As a result, it is advisable to have a professional analyze the site and your property in order to decide the optimal size of tank for your needs.

For example, a one-bedroom residence would require a minimum liquid capacity of 300 gallons in the tank liquid capacity.

Check out these 6 septic systems available for your home.

Nowadays, most concrete septic tanks are sold with a two compartment design, as opposed to the earlier style one compartment tank that was more common previously. Two compartment tanks tend to perform a better job of filtering and separating waste than one compartment tanks, which is why septic experts advocate them over a single compartment tank. All compartments are constructed with access for cleaning and pumping, regardless of the number of compartments in the system. Because it can readily handle most 0-3 bedroom dwellings, a 1000 gallon septic tank is the standard size for domestic applications.

Heavy Duty Options

Rather of the previous style one compartment tank, most concrete septic tanks sold nowadays are two compartment designs. Consequently, septic experts advocate two compartment tanks over one compartment tanks because they tend to perform a better job of filtering and sorting waste. All compartments are constructed with access for cleaning and pumping, regardless of the number of compartments in the vehicle. Because it can readily handle most 0-3 bedroom dwellings, a 1000 gallon septic tank is the standard size for household usage.

Installation Requirements

Because of the size and weight of concrete septic tanks, they must be installed by a qualified specialist. These tanks are constructed of the hardest materials available, and while they are extremely durable, their installation necessitates the use of enormous, heavy machinery. If the intended or present site of your concrete septic tank does not allow for heavy machinery access, you may want to investigate a fiberglass or plastic (polyethylene) tank.

Due to the fact that the majority of concrete tanks are precast, their sizes, weights, and dimensions are all different. However, keep in mind that all of these specs are approximations and are subject to change depending on state and local regulations.

Lifespan and Durability

The method by which the concrete septic tank was constructed will have an impact on its long-term function. High-quality concrete, adequate water sealing, and the use of structural steel goods such as mesh and rebar will provide additional support, strength, and structural integrity to the structure. Keep in mind that concrete septic tanks are more prone to cracking and leaking than their plastic and fiberglass equivalents when exposed to exceptionally cold temperatures and pressures. Most concrete septic tanks have a lifespan of up to 40 years if they are constructed properly and serviced on a regular basis.

1000 Gallon Concrete Septic Tank

Septic tanks of 1000 gallon capacity or larger are the most typical size for household usage, as they can readily fit most 0-3 bedroom dwellings. Size Weight: The weight of each concrete tank is different. Some of the most common 1000 gallon concrete precast tanks are around 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Others are approximately 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Here are some examples of Jensen Precast projects completed in various cities around the United States.

1250 Gallon Concrete Septic Tank

Generally speaking, a 1250 gallon tank is a good choice for mid-size homes with 3-4 bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. 1250 gallon concrete precast tanks are typically 5′ 9″ x 8′ 6″ x 5’8″ in size, with some of the more common models being 5′ 9″ x 8′ 6″ and others measuring 5′ 8″. The typical weight of a 1250 gallon concrete tank is 11,000 lbs, however this might vary depending on the distributor. Approximately 11 1/2 feet in depth, however this varies according on the distributor, state, and local statutes.

1500 Gallon Concrete Septic Tank

Generally speaking, a 1500-gallon tank is the most popular size for large homes with five or more bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. The dimensions of some of the most common 1500 gallon concrete precast tanks are around 6′ x 10′ 9″ x 5′ 5″ in length and width. The typical weight of a 1500 gallon concrete tank is 12,000 lbs, which is rather heavy. Approximately 12 feet in depth, however this varies according on the distributor, state, and local statutes.

Inlet Baffles

When installing a septic tank, an inlet baffle should be put on the inlet part closest to the point at which the sewer tank joins from the house structure to the tank.

Due to the fact that it prevents scum and oils from blocking the entrance pipe, the inlet baffle is critical to the overall health and effectiveness of the septic system. The intake baffle is a bottle neck that is especially designed to do the following:

  • When installing a septic tank, an inlet baffle should be put on the inlet part closest to the point at which the sewer tank links from the building to the tank. Due to the fact that it prevents scum and oils from blocking the entrance pipe, the inlet baffle is critical to the overall health and effectiveness of the complete septic system. The intake baffle is a bottle neck that has been particularly designed to do the following tasks.

Outlet Baffles

Every septic tank should be equipped with an exit baffle that is connected to the discharge line. The outlet baffle functions as a bottle neck in the same way as the inlet baffle, but in the opposite direction. It is meant to:

  • Preserving the septic tank by keeping scum, oils, and solid waste contained inside
  • It is necessary to prevent the discharge of waste items other than wastewater into the output pipe, drain field, and leach field.

All effluent from the septic tank must be clear of solid waste before it may be discharged. Other than that, the solids and oils will pollute the drain field/leach field and result in backups and pollutants entering the surrounding environment. Ensure that your baffles are correctly built and that they are not in need of repair by consulting with a licensed septic technician before doing anything else. Septic tanks made of fiberglass or polyethylene (polyethelyene) are also a suitable option, especially if your location has specialized environmental requirements.

See also:  What Do You Fill An Abandoned Septic Tank With? (Solved)

Mobility

In contrast to concrete septic tanks, which normally need a vehicle equipped with a crane and boom, fiberglass and polyethylene septic tanks are quite simple to transport. Therefore, fiberglass and plastic tanks are frequently employed in places where concrete septic tank delivery vehicles are unable to reach the tanks. The majority of fiberglass and plastic septic tanks weigh roughly 300 pounds or more, however concrete septic tanks can weigh up to 20-30 times as much.

Cost Effectiveness

If you’re seeking for a less expensive alternative to concrete, fiberglass and polyethylene (polyethylene) are excellent choices. The majority of fiberglass and plastic septic tanks are thousands of dollars less expensive than concrete septic systems.

Durability

When compared to a concrete septic tank, both plastic and fiberglass septic tanks have a lower likelihood of breaking. Furthermore, because fiberglass and plastic are nonporous materials, there is typically no problem with tree or bush roots growing into the tank and generating leaks as a result of root damage. Having said that, due to the tank’s smaller profile and lighter material composition, caution must be used during installation because heavy gear might easily harm it. Tanks made of fiberglass or plastic can be destroyed in the same way as concrete tanks can if too much weight is placed on the surface above them.

Despite the fact that plastic and fiberglass tanks are quite resilient, they can nonetheless leak under specific circumstances.

The size of the lot, the position of the tank, the amount of ground water, and the weather can all influence the selection.

Float

Plastic and fiberglass have a number of advantages, but they can also be troublesome. Yes, the lightweight character of these materials makes them perfect for installation, but same lightweight nature also results in a high level of buoyancy in the final product. It is possible that during a storm, a plastic or fiberglass tank can get dislodged from its couplings, causing considerable damage to the septic system and the homeowner’s property, with repair costs in the hundreds of dollars. A simple solution is to place a concrete slab on top of the tank to help weigh it down.

If you reside in an area with a high groundwater table, consult with a specialist to ensure that the higher water table will not cause harm to your fiberglass or plastic tank.

Septic Tanks

The septic tank itself can range in size from a normal 1,000 gallons to a maximum of 3,000 gallons, depending on the situation. A minimum of a 1000 gallon tank must be installed in a four-bedroom residence. A residence with five or more bedrooms requires a tank with a capacity of 1500 gallons. A septic tank’s essential functions are the same regardless of its size. They are as follows:

  • This system collects wastewater from the home, separates particles from liquids, stores solids, decomposes solids, and discharges wastewater to the drainage system.

If you need particular information on excavation recommendations, please see ourTank Installationpage. We also have size-specific information on anti-buoyancy for all of the sizes of tanks we offer, so please see ourTank Installationpage. HOLDING TANKS – Holding tanks are utilized in situations when there is insufficient appropriate soil for drain fields. The majority of holding tank systems consist of a single tank that holds waste permanently and should be pumped away on a regular basis. The frequency with which holding tanks must be pumped out will be determined by the volume of water consumed by a home.

DOSING TANKS FOR SEPTIC SYSTEMS – A dosing tank (also known as a pump tank) is an essential component of any pumped septic system.

The pump is turned on and off using float control switches located within the tank.

A highwater alarm is required for dosing tanks in order to warn the owner in the event of a pump failure or a full tank.

What size of septic tank do I need?

If you need precise information on excavation recommendations, please see ourTank Installationpage. We also have size-specific information on anti-buoyancy for all of the sizes of tanks we sell on that article. HOLDING TANKS – Holding tanks are utilized in situations when there is insufficient appropriate soil for drain fields to be constructed instead. One tank is used to permanently store waste, and it should be pumped out on a regular basis in the majority of holding tank installations. In a home, the frequency with which holding tanks are pumped out will be determined by the volume of water that is utilized.

DOSING TANKS FOR SEPTIC SYSTEMS – A dosing tank (also known as a pump tank) is an essential component of any pumped sewage system.

The pump is turned on and off using controls located within the tank.

septic tanks for new home construction

The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size. Of course, all of this is dependent on the number of people who live in the house as well as the amount of water and waste that will be disposed of through the plumbing system.

For the most accurate assessment of your septic tank needs, you should speak with an experienced and trustworthy sewer business representative. They can assist you in planning the intricacies of your septic system, including which sort of septic system will be most beneficial to you.

planning your drainfield

Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.

  • Vehicles should not be allowed on or around the drainfield. Planting trees or anything else with deep roots along the bed of the drain field is not recommended. The roots jam the pipes on a regular basis. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Create easy access to your septic tank cover by placing it near the entrance. Easy maintenance and inspection are made possible as a result. To aid with evaporation and erosion prevention, plant grass in the area.

a home addition may mean a new septic tank

Do not make any big additions or renovations to your house or company until you have had the size of your septic system assessed. If you want to build a house addition that is more than 10% of your total floor space, increases the number of rooms, or necessitates the installation of new plumbing, you will almost certainly need to expand your septic tank.

  • For a home addition that will result in increased use of your septic system, your local health department will require a letter from you that has been signed and authorized by a representative of your local health department confirming that your new septic system is capable of accommodating the increase in wastewater. It is not recommended that you replace your septic system without the assistance of a certified and competent contractor.

how to maintain your new septic system

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. Septic systems are something we are familiar with from our 40 years of expertise, and we propose the following:

  • Make use of the services of a qualified specialist to develop a maintenance strategy. Make an appointment for an annual examination of your septic system. Utilize the services of an effluent filter to limit the amount of particles that exit the tank, so extending the life of your septic system. Waste items should be disposed of properly, and energy-efficient appliances should be used. Make sure you get your septic system professionally cleaned every 2 to 3 years, or more frequently if necessary, by an experienced and qualified expert
  • If you have any reason to believe that there is an issue with your system, contact a professional. It is far preferable to catch anything early than than pay the price later. Maintain a record of all septic system repairs, inspections, and other activities

common septic questions

Here are some of the most frequently asked questions by our septic customers.

How do I determine the size of my septic tank?

If you have a rectangular tank, multiply the inner height by the length to get the overall height of the tank. In order to find out how many gallons your septic tank contains, divide the number by.1337.1337

How many bedrooms does a 500-gallon septic tank support?

The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size.

How deep in the ground is a septic tank?

Your septic system is normally buried between four inches and four feet underground, depending on the climate.

Septic Tank Sizes Chart: Common Tank Capacities and Measurements

High density polyethylene, abbreviated HDPE, is the most often used material for modern septic tanks, with concrete being the second most common material. HDPE is a heavy-duty grade polyethylene that is used to manufacture a variety of items, including septic tanks, which are available in both underground and above-ground configurations. Because of the robustness and adaptability of HDPE, plastic septic tanks are available in a broad range of volume capacities and measurement measurements to suit any application.

Plastic septic tanks are less expensive than concrete tanks, they are easier to carry and install, they are more resistant to cracking and weathering, and they are available in a variety of forms, volumes, and sizes to satisfy the exact demands of every application.

Our septic tank sizes chart contains the most often used tank capacity and measurements, which should be of assistance. The chart contains the liquid surface area provided by the septic tank’s size, which may be used to assist in selecting the appropriate tank.

Underground Septic Tank Specifications Chart — Standard Septic Tanks

The following chart provides an overview of the requirements for conventional septic tanks.

Volume (Gallons) Dimensions (L x W x H) Compartments Liquid Surface Area (Sq. Ft.) Manufacturer
500 Gallons 101″ L x 51″ W x 47″ H 1 35.77 Sq. Ft. Norwesco
750 Gallons 96″ L x 48″ W x 63″ H 1 32.00 Sq. Ft. Norwesco
750 Gallons 70″ L x 60″ W x 60″ H 1 29.16 Sq. Ft. Ace Roto Mold
1000 Gallons 102″ L x 60″ W x 63″ H 1 42.5 Sq. Ft. Norwesco
1000 Gallons 102″ L x 60″ W x 63″ H 2 42.5 Sq. Ft. Norwesco
1000 Gallons 101″ L x 60″ W x 60″ H 1 42.08 Sq. Ft. Ace Roto Mold
1000 Gallons 101″ L x 60″ W x 60″ H 2 42.08 Sq. Ft. Ace Roto Mold
1250 Gallons 116″ L x 55″ W x 70″ H 1 44.30 Sq. Ft. Norwesco
1250 Gallons 116″ L x 55″ W x 70″ H 2 44.30 Sq. Ft. Norwesco
1250 Gallons 118″ L x 58″ W x 72″ H 1 47.53 Sq. Ft. Ace Roto Mold
1250 Gallons 118″ L x 58″ W x 72″ H 2 47.53 Sq. Ft. Ace Roto Mold
1500 Gallons 135″ L x 55″ W x 70″ H 1 51.56 Sq. Ft. Norwesco
1500 Gallons 135″ L x 55″ W x 70″ H 2 51.56 Sq. Ft. Norwesco
1500 Gallons 137″ L x 58″ W x 72″ H 1 55.18 Sq. Ft. Ace Roto Mold
1500 Gallons 137″ L x 58″ W x 72″ H 2 55.18 Sq. Ft. Ace Roto Mold
2000 Gallons 126″ L x 98″ W x 51″ H 1 85.75 Sq. Ft. Norwesco
2500 Gallons 159″ L x 99″ W x 51″ H 1 109.31 Sq. Ft. Norwesco
3525 Gallons 211″ L x 102″ W x 51″ H 1 149.46 Sq. Ft. Norwesco
5025 Gallons 211″ L x 102″ W x 73″ H 1 149.46 Sq. Ft. Norwesco
10000 Gallons 356″ L x 101″ W x 107″ H 2 249.69 Sq. Ft. Norwesco

Underground Septic Tank Specifications Chart — Low Profile Septic Tanks

The low profile septic tank parameters shown in the accompanying chart provide a general overview.

Volume Dimensions (L x W x H) Compartments Liquid Surface Area (Sq. Ft.) Manufacturer
500 Gallons 97″ L x 48″ W x 42″ H 1 32.33 Sq. Ft. Norwesco
750 Gallons 92″ L x 60″ W x 51″ H 1 38.33 Sq. Ft. Norwesco
750 Gallons 92″ L x 60″ W x 51″ H 2 38.33 Sq. Ft. Norwesco
1000 Gallons 127″ L x 60″ W x 51″ H 1 52.92 Sq. Ft. Norwesco
1000 Gallons 127″ L x 60″ W x 51″ H 2 52.92 Sq. Ft. Norwesco
1250 Gallons 157″ L x 60″ W x 51″ H 1 65.42 Sq. Ft. Norwesco
1250 Gallons 157″ L x 60″ W x 51″ H 2 65.42 Sq. Ft. Norwesco
1500 Gallons 157″ L x 69″ W x 51″ H 1 75.23 Sq. Ft. Norwesco
1500 Gallons 157″ L x 69″ W x 51″ H 2 75.23 Sq. Ft. Norwesco
See also:  How Clpse Can A Driveway Be To A Septic Tank? (Solved)

Underground Septic Tank Specifications Chart — Septic Pump Tanks

The following chart provides an overview of the specs for septic pump tanks.

Volume (Gallons) Dimensions (L x W x H) Liquid Surface Area (Sq. Ft.) Manufacturer
200 Gallons 47″ L x 47″ W x 56″ H 15.34 Sq. Ft. Norwesco
225 Gallons 47″ L x 47″ W x 56″ H 15.34 Sq. Ft. Norwesco
300 Gallons 48.5″ L x 48.5″ W x 53″ H 16.34 Sq. Ft. Snyder
300 Gallons 54″ L x 54″ W x 55″ H 20.25 Sq. Ft. Ace Roto Mold
300 Gallons 54″ L x 54″ W x 54″ H 20.25 Sq. Ft. Norwesco
300 Gallons FL Approved 54″ L x 54″ W x 54″ H 20.25 Sq. Ft. Norwesco
500 Gallons 60″ L x 60″ W x 63″ H 25.00 Sq. Ft. Snyder
500 Gallons 63″ L x 63″ W x 74″ H 27.56 Sq. Ft. Ace Roto Mold
500 Gallons 64″ L x 64″ W x 67″ H 28.44 Sq. Ft. Norwesco
525 Gallons FL Approved 64″ L x 64″ W x 67″ H 28.44 Sq. Ft. Norwesco

Above Ground Septic Tank Specifications Chart – Septic Holding Tanks

The following chart provides an overview of the many types of above-ground septic tanks that are currently available, as well as their specs.

Volume (Gallons) Dimensions (L x W x H) Liquid Surface Area (Sq. Ft.) Manufacturer
250 Gallons 69″ L x 49″ W x 19.5″ H 23.48 Sq. Ft. NTO
250 Gallons 84″ L x 40″ W x 17″ H 23.33 Sq. Ft. Quadel
300 Gallons 95″ L x 56″ W x 16″ H 36.94 Sq. Ft. Ace Roto Mold
300 Gallons 95″ L x 56″ W x 16″ H 36.94 Sq. Ft. NTO
350 Gallons 88″ L x 44″ W x 25″ H 26.88 Sq. Ft. Quadel
440 Gallons 91″ L x 72″ W x 16″ H 45.50 Sq. Ft. NTO
500 Gallons 130″ L x 52″ W x 22″ H 46.94 Sq. Ft. Norwesco
1000 Gallons 136″ L x 91″ W x 20″ H 85.94 Sq. Ft. NTO

Due to the possibility of change as well as variation in pricing as a result of sales prices, septic tank costs are not included in these table calculations. Please do not hesitate to contact us if you require any assistance or have any concerns regarding septic tank specifications, shipping, modifications, or anything else. We at the National Tank Outlet are always here to assist you with your liquid handling and transportation requirements. Alek Eccles is a technical writer and professional content developer that works in the technology industry.

Alek’s goal is to promote awareness of technological, chemical, and biological industries, systems, and ideas, as well as rainwater harvesting, plastics/thermoplastics, and containers used for general storage, handling, and transportation, among other things.

Septic Tanks

Listed below is a list of the septic tanks, chlorine contact tanks, and siphon dose tank packages thatCamden Supplyoffers, along with detailed descriptions of their features and specifications. Please call Camden Supply and chat with one of our staff if you require further information on a certain product.

Single Compartment Septic Tanks

Listed below is a list of the septic tanks, chlorine contact tanks, and siphon dose tank packages thatCamden Supplyoffers, together with detailed descriptions of their specs and measurements. In order to obtain further information on a certain product, please call Camden Supply and talk with one of our staff.

  • Overall height is 56 inches
  • Overall length is 79 inches
  • Overall width is 48 inches
  • Height to center line of inlet is 48 inches
  • Height to center line of outflow is 45 inches
  • Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


600 Gallon Single Septic Tank

Specifications:

  • Overall height is 62 inches
  • Overall length is 79 inches
  • Overall width is 48 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of outflow is 49 inches
  • Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


1000 Gallon Single Septic Tank

Septic tank with a single compartment made of steel reinforced concrete (SRC). Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 96 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 8,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1250 Gallon Single Septic Tank

A one-compartment steel-reinforced concrete septic tank with the lower portion cast as a single piece so that there are no seams that come into touch with effluent. Specifications:

  • Overall height is 60 inches
  • Overall length is 117 inches
  • Overall width is 68 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,400 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psiApplications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1500 Gallon Single Septic Tank

Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 11,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


25003500Gallon Single Septic Holding Tanks

Single Septic Holding Tank with a capacity of 2500 gallonsSpecifications:

  • Overall height is 68 inches
  • Overall length is 144 inches
  • Overall width is 78 inches
  • Height to center line of intake is 61 inches
  • Height to center line of outflow is 61 inches
  • Weight is 16,000 pounds.

Single Septic Holding Tank with 35 00 Gallon CapacitySpecifications:

  • Overall height is 98 inches
  • Overall length is 144 inches
  • Overall width is 78 inches
  • Height to center line of intake is 91 inches
  • Height to center line of exit is 91 inches
  • Weight is 20,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


Dual Compartment Septic Tanks

It has an overall height of 98 inches, an overall length of 144 inches, an overall width of 78 inches, a height to the center line of the inlet at 91 inches, and a height to the center line of the exit at 91 inches; it has an overall weight of twenty thousand pounds.

  • Overall height is 60 inches
  • Overall length is 96 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1250 Gallon Dual Septic Tank

Description:Two-compartment tank with a solids separator between the first and second compartments, holding 625 gallons and 625 gallons. Specifications:

  • Overall height is 60 inches
  • Overall length is 117 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1500 Gallon Dual Septic Tank

Description:Two compartment system with a capacity of 1000 gallons in the first compartment and 500 gallons in the second compartment. The dosage pump portion is usually found in the second compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 11,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


Triple Compartment Septic Tanks

Description:Three-compartment system with a solids separator between the first and second compartments. Each compartment holds 500 gallons. The dosage pump segment is usually found in the third compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 12,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections. Available with pre-wired pump packages, complete with alarm, floats, and pump pad, with horse powers from 1/3 to 1.5, with up to 135 feet of total head capacity.


Chlorine Contact Tanks

Specifications:

  • Overall height is 56 inches
  • Overall length is 79 inches
  • Overall width is 48 inches
  • Height to center line of inlet is 48 inches
  • Height to center line of outflow is 45 inches
  • Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.500_gallon_chlorine_contact_or_grease_interceptor.pdfDownload File


Siphon Dose Tank Packages

Specifications:

  • It measures 56 inches in height, 79 inches in length, 48 inches in width, 48 inches in height from center line of intake, 48 inches in height from center line of outlet, and 5,000 pounds in weight. It is equipped with an indoor alarm and alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


1000 Gallon Siphon Tank Package

Specifications:

  • It measures 60 inches in height, 102 inches in length, and 67 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,000 pounds. It comes with an indoor alarm and an alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1250 Gallon Siphon Tank Package

Specifications:

  • Specifications:
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1500 Gallon Siphon Tank Package

Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of intake is 52 inches
  • Height to center line of exit is 52 inches
  • Weight is 13,000 pounds
  • Includes indoor alarm and alarm float
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1000 Regular

Regular septic tanks (model 1000) are the wastewater standard for the vast majority of residences. Featuring an integrated concrete input baffle as well as a Polylok PL-122 effluent filter with the industry’s first shut-off ball, this unit is a game changer.

Specifications:
  • The design of the septic tank is monolithic
  • The concrete is 4000 psi and set in 28 days
  • The rebar is structural fiber grade-60. Precast concrete with air entrained in it: 6 percent (+-1 percent)
  • Tank penetrations with rubber boots that are integrally cast
  • Designed for non-traffic loading applications. Fill depths range from 0 to 36 inches
  • Vacuum testing is offered for an extra fee.

The design of the septic tank is monolithic; the concrete is 4000 psi and set in 28 days; the rebar is structural fiber grade-60; 6-percent (+-1 percent) of precast concrete with air entrained; Rubber boots are used to completely cast tank penetrations. Built for non-traffic loading applications. For a little extra fee, vacuum testing may be performed on the fill depth ranging from 0″ to 36″.

Specifications:

rn

  • One-piece septic tank design
  • 4000 psi concrete set in 28 days
  • Reinforced with structural fibers grade-60 rebar
  • Monolithic septic tank construction
  • Precast concrete with air entrained in it: 6 percent (+1 percent)
  • Rubber boots are used to penetrate tank penetrations that are integrally cast. Designed for non-traffic loading applications
  • Fill depths range from 0″ to 36″
  • Vacuum testing is provided for an extra fee.

Data sheet

Dimensions: 9 590 pounds; capacity: 1 000 gallon Exterior Dimensions64″ H x 5′-4″ W x 8′-0″ LInvert Out51 1/2″ Exterior Dimensions64″ H x 5′-4″ W x 8′-0″

Specific References

Septic systems are not the sort of system that is “one size fits all.” Even if one size tank may be sufficient for one home, this does not imply that it will be sufficient for all households. Talking with a plumbing and septic tank specialist will be your best bet for ensuring that you purchase the proper size tank for your needs. This article will provide you with the fundamental knowledge you need to get started on your home repair and plumbing projects.

See also:  What Is Usual Diameter Of Septic Tank Manhole? (Solved)

Things to consider

The following factors should be taken into consideration when selecting the amount of septic tank that your property requires; for example,

  1. The square footage of the property in question
  2. What is the number of rooms in the house
  3. Who will be residing in the house
  4. How many people will be living in the house

Septic tanks are typically available in sizes ranging from 750 gallons to 1,250 gallons in capacity. We need some background information before we can get into the meat of the discussion.

What is a Septic Tank?

Septic tanks are self-contained, subterranean chambers or containers that are meant to retain wastewater generated by a home or other building. Generally speaking, septic systems are composed of two major components: the tank and the drain field. As soon as the wastewater exits your home, it will begin to flow into the holding tank. Solid waste will settle to the bottom of the tank, forming a “sludge” layer on the bottom of the tank. Other liquids, such as oil and grease soap residue, will float to the surface, forming the “scum” layer on the surface.

This layer will be made up of wastewater, which is also referred to as effluent in some circles. Eventually, when the tank fills, the effluent drains from the tank and onto the drain field, where it is absorbed by the earth.

Are there Different Types of Septic Tanks?

That’s an excellent question! Yes, several sorts of materials are used to construct your septic tank by the manufacturer. When it comes to placing the tank, it all comes down to personal style, affordability, and maneuverability. Let us have a look at the many sorts of tanks that are most typically encountered:

Concrete Septic Tanks

Designed to endure several decades, these tanks are one of the most robust solutions available for your household plumbing requirements. However, because they are the heaviest of the materials, their upkeep and installation will almost certainly be more expensive. Another thing to keep in mind is that they are prone to cracking, which can result in wastewater spilling into the surrounding ground and potentially polluting drinking water.

Plastic Septic Tanks

These tanks are more resistant to the natural, biological, and chemical processes that will take place in your tank as a result of their construction. They are also more resistant to cracking than other types of concrete. Because they are made of plastic, they are lightweight, which makes them quite simple to install. Unfortunately, if your earth moves or floods, plastic tanks have a tendency to shift and wander around underground. It is possible that your tank will move or possibly rise out of the ground as a result of this.

Fiberglass Septic Tanks

This sort of tank is more robust than plastic since it is less likely to flex or shift when it is placed in a stable location. Additionally, they are more cost-effective than concrete septic tanks because to their lightweight and noncorrosive nature both within and outside the tank. Unlike plastic or concrete tanks, they are also less prone to suffer structural damage than those materials.

Steel Septic Tanks

These tanks are becoming increasingly rare, but it doesn’t rule out the possibility of seeing one in the future. Steel is the least expensive of the materials used in septic tanks, but it does so at the expense of durability. Despite the fact that they are intended to endure between 20 and 25 years, they frequently rust before they have reached their entire lifespan. Now that we’ve covered the essential background material, let’s move on to the actual subject at hand.

What Size Septic Tank Do You Need?

  • Home with fewer than 1.500 square feet = 750-gallon tank
  • Home with fewer than 2,500 square feet = 1,000-gallon tank
  • Home with fewer than 3,500 square feet = 1,250-gallon tank
  • Home with fewer than 4,500 square feet = 1,250-gallon tank
  • And home with fewer than 5,500 square feet = 1,315-gallon tank
  • Home with fewer than 2,500 square feet = 1,315-gallon tank

Conclusion

Keep in mind that the information provided above is only a preliminary approximation. The actual size of the tank you want will be determined by a combination of the criteria listed above as well as the regulations of your local jurisdiction. Talking to a professional plumber and septic system installation is your best choice for ensuring that you are not only complying with local standards, but that you are also getting the “most bang for your buck.” Back-ups or the need for more frequent pumping and maintenance may result if you choose the incorrect size septic tank or if you have too many people living in a home with a smaller septic tank.

If you choose the incorrect size septic tank or have too many people living in a home with a smaller septic tank If you’re ready to become a member of the septic tank family, get in touch with us right away!

We would be delighted to assist you with your new residential plumbing endeavor. Please contact us for more information.

Septic Tanks

CODE SIZESINTERNAL Øx DEPTH(mm)(mm) WALLTHICKNESS(mm) 100mmØ100mm ØINLETOUTLETHEIGHTHEIGHTFrom Bottom(mm)(mm) CAPACITY(ltrs) WEIGHT(kg)
AB C DE
A05A 1800x1875w/base cast in 90 1575 1460 3325 3600
A06A 1800x1575w/base cast in 90 1275 1160 2571 3100
A04AA 1500x1530w/base cast in 75 1240 1160 1970 1840
A04BB 1200x1500w/base cast in 75 1190 1160 1269 1400

Sets

CODE DESCRIPTION TOTAL WEIGHT(KG)
A00A 15001200 (BOTH TANKS)W/STANDARD COVERS (2PCE)W/ BASES CAST IN 3860
A00B 15001200 (BOTH TANKS)W/TRAFFIC COVERS (2PCE)W/ BASES CAST IN 4615

LIDS ARE ALSO SOLD SEPARATELY IF REQUIRED (below)

STANDARD COVERS (2 PIECE)
CODE SIZE WEIGHT
D01A 1650 X 70mm (2 PCE SEPTIC) 390 KG (Total)
D03A 1350 X 70mm (2 PCE SEPTIC) 230 KG (Total)
TRAFFIC COVERS (2 PIECE)
CODE SIZE WEIGHT
D07A 2000 X 150mm (2 PCE SEPTIC) 1230 KG (Total)
D08A 1650 X 150mm (2 PCE SEPTIC) 830KG (Total)
D10A 1350 X 150mm (2 PCE SEPTIC) 545KG (Total)
  • Our septic tanks have been approved in accordance with Australian Standard AS/NZS 1546
  • We are in compliance with the Department of Health, under the Code of Practice for Product Approval of Onsite Wastewater Systems
  • ApprovalF-AA-31116
  • Further information may be obtained at the following links:

* Weights and measurements are provided as a suggestion only. There will be some variances in the results. All reasonable care and thought has been put into the preparation of the information contained on this website; however MCP and its related agents make no representations as to the accuracy of any information shown and disclaim all liability for negligence, any error or discrepancy, or any other irregularity in the items displayed.

Dimension List – Arizona Precast Septic Concepts LLC

Measurements are mainly for reference purposes. There will be some variances. Despite the fact that the information contained within this website has been prepared with all reasonable care and consideration, MCP and its related agents do not warrant the accuracy of any information shown and do not accept any liability for negligence, any error or discrepancy, or any other inconsistency in the items displayed.

ACTUAL SIZE

4’8″ in length, 4’8″ in width Height-4’9.5″ Approximately 45 inches from the bottom of the tank to the bottom of the stub out Outlet approximately 43 inches from the bottom of the tank to the bottom of the stub out

ACTUAL SIZE

Length: 9’9″ (bottom) and 10’5″ (top) (top) Width: 4’2′′ (bottom) and 4’9′′ (top) (top) Height-5’11” Approximately 54 inches from the bottom of the tank to the bottom of the stub out From the bottom of the tank to the bottom of the stub out, the outlet is 52 inches.

HOLE DIMENSIONS

11’7″ in length, 6’6″ in width

ACTUAL SIZE

Length: 9’9″ (bottom) and 10’5″ (top) (top) Width: 4’8″ (bottom) 4’9″ (top) (top) Height-6’1″ the length of the inlet pipe from the bottom of the tank to the bottom of the stub out Inlet-56 inches from the bottom of the tank to the bottom of the stub out.

HOLE DIMENSIONS

9’9″ (bottom) and 10’5″ (top) in length (top) 5 feet 8 inches at the bottom, and 5 feet 9 inches at the top (top) Height-6’1″ INPUT: 58′′ measured from the bottom of the tank to the bottom of the stub out. 56′′ from the bottom of the tank to the bottom of the stub out.

ACTUAL SIZE

9’8″ (bottom) and 10’5″ (top) in length (top) Width-6’6″ Height-6’3″ the length of the inlet pipe from the bottom of the tank to the bottom of the stub out Inlet-56 inches from the bottom of the tank to the bottom of the stub out.

HOLE DIMENSIONS

9’8″ (bottom) and 10’5″ (top) in length (top) Width-6’6″ Height-6’3″ INPUT: 58′′ measured from the bottom of the tank to the bottom of the stub out. 56′′ from the bottom of the tank to the bottom of the stub out.

ACTUAL SIZE

The length is 12’10” and the width is 5’8″. 5’7.5″ in height is the maximum. Inlet – 55 inches, outlet – 52 inches

HOLE DIMENSIONS

12’10” in length, 5’8″ in width 5′ 7.5″ in height. Outlet: 52 inches inlet: 55 inches

ACTUAL SIZE

14’4″ in length, 6’6″ in width Height-5’11” It measures 55 inches from the bottom of the tank to the bottom of the stub out and 53 inches from that same bottom to the bottom of the stub out. Inlet: 55 inches from the bottom of the tank to the bottom of the stub out

HOLE DIMENSIONS

15’10” in length, 8’10” in width

ACTUAL SIZE

14’6.5″ in length, 5’8″ in width, and 5’7.5″ in height Approximately 55 inches from the bottom of the tank to the bottom of the stub out From the bottom of the tank to the bottom of the stub out, the outlet is 52 inches.

HOLE DIMENSIONS

156.5 inches in length, 5’8 inches in width, and 5’7 inches in height Approximately 55 inches from the bottom of the tank to the bottom of the stub out. From the bottom of the tank to the bottom of the stub out, the outlet is 52′′.

ACTUAL SIZE

14’4″ in length, 6’6″ in width Height-6’4″ From the bottom of the tank to the bottom of the stub out, the inlet is 60 inches. From the bottom of the tank to the bottom of the stub out, the outlet is 58 inches.

HOLE DIMENSIONS

15’10” in length, 8’10” in width

ACTUAL SIZE

The tank measures 14’4″ in length, 6’6″ in width, and 6’10” in height. The inlet measures 66″ from the bottom of the tank to the bottom of the stub out, and the outlet measures 64″ from the bottom of the tank to the bottom of the stub out.

HOLE DIMENSIONS

15’10” in length, 8’10” in width

ACTUAL SIZE

14’4″ in length, 6’6″ in width Height-7’5″ From the bottom of the tank to the bottom of the stub out, the inlet is 73 inches. from the bottom of the tank to the bottom of the stub out, outlet-71′′

HOLE DIMENSIONS

15’10” in length, 8’10” in width

ACTUAL SIZE

14’4″ in length, 6’6″ in width Height-9’1″ From the bottom of the tank to the bottom of the stub out, the inlet is 93 inches. From the bottom of the tank to the bottom of the stub out, the outlet is 91 inches.

HOLE DIMENSIONS

15’10” in length, 8’10” in width

ACTUAL SIZE

14’4″ in length, 6’6″ in width Height-10’7″ Inlet-111′′ measures the distance from the bottom of the tank to the bottom of the stub out. From the bottom of the tank to the bottom of the stub out, the outlet is 109 inches.

HOLE DIMENSIONS

15’10” in length, 8’10” in width

ACTUAL SIZE

14’4″ in length, 6’6″ in width Height-11’1″ From the bottom of the tank to the bottom of the stub out, the inlet is 116 inches. From the bottom of the tank to the bottom of the stub out, the outlet is 114 inches.

HOLE DIMENSIONS

15’10” in length, 8’10” in width 15.5 inches in length, 11 inches in width, and 10.5 inches in height

Other sizesavailable upon request

8′′X8′′ taper to 6.75′′X6.75′′6′ long x 6′′ tall x 8.5′′ wide 8′′X8′′ taper to 6.75′′X6.75′′ 47 inches in length, 5 inches in height, and 9 inches in width

Other sizes made upon request

24 inches inside diameter, 34 inches outside diameter

Leave a Comment

Your email address will not be published. Required fields are marked *