How to determine the size of a septic tank?
- 1 Consider Your Water Usage. The most reliable and effective way of determining the septic tank size suitable for your property is by calculating the amount of water you use. 2 Consider the Size of Your Property. 3 The Number of Bedrooms Your Property Has. 4 The Number of Occupants.
How is septic tank design calculated?
Septic Tank Size Calculation based Per User Consumption
- Cooking – 5 Liters.
- Bathing & Toilet – 85 Liters/Person, So for 5 person – 425 liters/Day.
- Washing cloths & Utensils – 30 Liters.
- Cleaning House – 10 Liters.
- Other – 5 Litres.
How do you calculate septic tank capacity?
How to Calculate the Septic Tank Capacity in Gallons. 3.14 x radius squared x depth (all in feet) = cubic capacity. Cubic capacity x 7.5 = gallons capacity. Length x width in inches / 231 = gallons per inch of septic tank depth.
How big should a septic tank be for a 3 bedroom house?
The correct size of the septic tank depends mostly on the square footage of the house and the number of people living there. Most residential septic tanks range in size from 750 gallons to 1,250 gallons. An average 3-bedroom home, less than 2500 square feet will probably require a 1000 gallon tank.
How often does a 1000 gallon septic tank need to be pumped?
For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.
How do I calculate the size of my septic drain field?
Drainfield Size
- The size of the drainfield is based on the number of bedrooms and soil characteristics, and is given as square feet.
- For example, the minimum required for a three bedroom house with a mid range percolation rate of 25 minutes per inch is 750 square feet.
What is standard size of septic tank?
Length of septic tank (L) should be taken as 9feet 9 inches or 9.75 feet. Breadth of septic tank (B) should be taken as 6 feet 3 inches or 6.25 feet. The standard height (D) of septic tank should be taken as 5 feet 9 inches or 5.75 feet.
How long do septic tanks last?
A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.
Can you have a septic tank without a leach field?
The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.
Is concrete septic tank better than plastic?
Cement Septic tanks are very durable than plastic tanks and, if kept properly, can have extended longevity. With regular draining and proper maintenance, a cement septic tank can last for up to 40 years. Cement septic tanks are resistant to environmental changes such as tree roots or changing soil conditions.
How often should a septic tank be pumped?
Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.
How much does it cost to pump a septic tank?
How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.
Is a 500 gallon septic tank big enough?
The minimum tank size for a three bedroom house is 1200 gallons. 500 or 750 gallon tanks used to be quite common in old houses, but they are not large enough for modern households, and are from a time without automatic washers, large spa tub, dishwashers, or multiple daily showers.
What Size Septic Tank Do I Need
The size of an underground septic tank is referred to as its total volume handling capacity in this article, and it will be discussed in further detail later in this article. For additional information on above-ground septic tanks and systems, see our page on above-ground septic tanks. The minimum septic tank capacity requirements are determined by a variety of variables. State, county, and/or city regulations may specify permitted tank sizes, as well as tank materials and installation.
The size of the septic tank will vary depending on whether it is intended for domestic or commercial usage; in this section, we will cover residential use.
Shortly stated, the required size of a septic tank will be determined by the following factors: (1) the specific septic system type; (2) local government requirements; (3) the compatibility of the ground geology; and (4) the anticipated volume of wastewater depending on the size of the residence.
However, this is not true.
Furthermore, plastic septic tanks will not corrode, are weatherproof, are waterproof, are less expensive, are lighter, and are easier to build.
1) The Specific Septic System Type
There are seven different types of septic tank systems, and the size of the tank required will vary depending on the system you choose. The scope of this article does not allow for a comprehensive discussion of each system type and its associated size requirements. We are referring to traditional gravity-fed anaerobic septic systems in this context when we say “system type.” The anaerobic septic system is the most prevalent type of septic system, and it is the one that most people think of when they imagine a septic tank.
- The following systems are available: conventional, gravity-fed, anaerobic systems
- Above-ground septic systems
- Pressure systems
- Anaerobic systems
- Mound systems
- Recirculating sand or gravel filters systems
- Bottomless sand filters systems
If your septic tank system is anything other than a traditional, anaerobic system, the instructions in this page may not be applicable in their entirety to your situation.
2) Local Government Regulations
The laws for septic tanks imposed by local governments vary greatly across the United States. In part, this is due to the significantly diverse soil geography and water features that exist from state to state and can even differ by a few miles in some cases. In order to determine the appropriate septic tank size and the best position on the land for installation, it is essential to consult with local government rules first. Take, for example, theWastewater Treatment Standards – Residential Onsite Systemsdocument from the New York State Department of Health, which provides a comprehensive informational overview of codes, rules, and regulations frequently promulgated by governing bodies, as well as common terminology and definitions in the industry.
3) Suitability of the Ground Geology
The laws for septic tanks imposed by local governments differ significantly across the country. Due to the significantly diverse soil geography and water features found in each state, and sometimes even within a few miles of one another, this is the case In order to determine the appropriate septic tank size and the best placement on the land for installation, it is critical to consult with local government officials first. Review theWastewater Treatment Standards – Residential Onsite Systemsdocument from the New York State Department of Health for an example, as well as an informative discussion of codes, rules, and regulations frequently put forward by regulatory departments, as well as common terminology and meanings.
4) The Expected Volume of Wastewater
The typical amount of wastewater that will be generated and that the septic tank will be able to manage is the most essential factor in determining the size of the septic tank that is required. In a home with simply a septic system, all wastewater is disposed of in the septic tank unless a separate system for managing greywater is in place to handle the waste. In order to calculate and approximate these values for residential dwellings, business structures, and facilities, extensive study has been carried out.
Starting with a 1000-gallon septic tank for residential usage, the advice is to go from there.
Some experts propose adding an additional 250 gallons of septic tank capacity for each additional bedroom over three bedrooms.
This is frequently the case when considering the situation collectively for the entire household rather than individually.
Minimum Septic Tank Capacity Table
For further information on the minimum septic tank capacity dependent on the number of residential bedrooms, please see the following table:
| Number of Bedrooms | Minimum Septic Tank Size | Minimum Liquid Surface Area | Drainfield Size |
|---|---|---|---|
| 2 or less | 1000 – 1500 Gallons | 27 Sq. Ft. | 800 – 2500 Sq. Ft. |
| 3 | 1000 – 2000 Gallons | 27 Sq. Ft. | 1000 – 2880 Sq. Ft. |
| 4 | 1250 – 2500 Gallons | 34 Sq. Ft. | 1200 – 3200 Sq. Ft. |
| 5 | 1500 – 3000 Gallons | 40 Sq. Ft. | 1600 – 3400 Sq. Ft. |
| 6 | 1750 – 3500 Gallons | 47 Sq. Ft. | 2000 – 3800 Sq. Ft. |
Take note of the following in relation to the table above:
- The following should be taken into consideration with respect to the table above:
Additional Thought: Can a Septic Tank Be Too Big?
In the absence of consideration for cost, it is reasonable to ask: “Can a septic tank be too large?” The answer is a resounding nay. As long as the septic tank is placed appropriately, it is impossible for a septic tank to be too large; the only thing that can happen is that it is too little.
According to the majority of suggestions, constructing a larger-capacity septic tank is frequently the safer and more preferable solution. The following are the reasons behind this:
- With a bigger septic tank, you can adapt for changes in household consumption, such as those caused by parties or long-term guests. In the event that your family grows in size or you want to make improvements to your house, such as adding more bedrooms and bathrooms or installing new plumbing fixtures, having a bigger septic tank can save you the expense of installing a new tank.
Takeaways | What Size Septic Tank Do I Need
The septic tank size recommendations offered here are merely that: suggestions. They are built on a foundation of information gathered from government and academic sources. The actual size of the septic tank you require will vary depending on the factors discussed in this article. There is no “one-size-fits-all” solution when it comes to determining the appropriate septic tank size for your property. There is a great deal of variation depending on where you reside. With addition to providing a basic insight into the septic tank and system size that may be most suited to your application, the providedMinimum Septic Tank Capacity Tablecan also assist in cost estimations.
Before beginning any septic tank installation project, check and double-check with the state, city, or local county’s agency that is in charge of septic tanks, soil testing, and permissions.
If you’re searching for a chart of tank sizes, have a look at our page on the many sizes and quantities of septic tanks available.
They are available in both single chamber and double chamber designs.
What size of septic tank do I need?
Probably one of the last things on your mind when you are constructing a new house is the location of your septic system. After all, shopping for tanks isn’t nearly as entertaining as shopping for cabinetry, appliances, and floor coverings. Although you would never brag about it, your guests will be aware if you do not have the proper septic tank placed in your home or business.
septic tanks for new home construction
The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size. Of course, all of this is dependent on the number of people who live in the house as well as the amount of water and waste that will be disposed of through the plumbing system.
For the most accurate assessment of your septic tank needs, you should speak with an experienced and trustworthy sewer business representative.
planning your drainfield
Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.
- Vehicles should not be allowed on or around the drainfield. Planting trees or anything else with deep roots along the bed of the drain field is not recommended. The roots jam the pipes on a regular basis. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Create easy access to your septic tank cover by placing it near the entrance. Easy maintenance and inspection are made possible as a result. To aid with evaporation and erosion prevention, plant grass in the area.
a home addition may mean a new septic tank
Do not make any big additions or renovations to your house or company until you have had the size of your septic system assessed. If you want to build a house addition that is more than 10% of your total floor space, increases the number of rooms, or necessitates the installation of new plumbing, you will almost certainly need to expand your septic tank.
- For a home addition that will result in increased use of your septic system, your local health department will require a letter from you that has been signed and authorized by a representative of your local health department confirming that your new septic system is capable of accommodating the increase in wastewater. It is not recommended that you replace your septic system without the assistance of a certified and competent contractor.
how to maintain your new septic system
Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. Septic systems are something we are familiar with from our 40 years of expertise, and we propose the following:
- Make use of the services of a qualified specialist to develop a maintenance strategy. Make an appointment for an annual examination of your septic system. Utilize the services of an effluent filter to limit the amount of particles that exit the tank, so extending the life of your septic system. Waste items should be disposed of properly, and energy-efficient appliances should be used. Make sure you get your septic system professionally cleaned every 2 to 3 years, or more frequently if necessary, by an experienced and qualified expert
- If you have any reason to believe that there is an issue with your system, contact a professional. It is far preferable to catch anything early than than pay the price later. Maintain a record of all septic system repairs, inspections, and other activities
common septic questions
Here are some of the most frequently asked questions by our septic customers.
How do I determine the size of my septic tank?
If you have a rectangular tank, multiply the inner height by the length to get the overall height of the tank. In order to find out how many gallons your septic tank contains, divide the number by.1337.1337
How many bedrooms does a 500-gallon septic tank support?
The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size.
How deep in the ground is a septic tank?
Your septic system is normally buried between four inches and four feet underground, depending on the climate.
Three Ways to Determine the Right Residential Septic Tank Size
Septic tanks are essential in keeping houses without access to public sewage clean and safe, and there are a variety of alternatives available depending on the needs of the person or family. It is crucial to note that while the kind of septic tank can be chosen depending on personal desire, the right size must be decided with care in order for it to effectively break down waste. Homeowners may choose from a number of various approaches to assist them in determining the septic tank size that is most appropriate for their residence.
Bedroom and Square Footage Calculation
One of the most straightforward methods for homeowners to identify the optimal septic tank size for their property is to base their decision on the number of occupied bedrooms in the house as well as the square footage of the house.
- 750-gallon tank for homes with one to two bedrooms and less than 1,500 square feet
- There are three bedrooms and fewer than 2,500 square feet: a 1,000-gallon tank
- And Four bedrooms and fewer than 3,500 square feet: 1,200-gallon tank to 1,250-gallon tank
- 1,200-gallon tank to 1,250-gallon tank A 1,500-gallon tank is required for homes with five to six bedrooms and less than 5,500 square feet.
Water Usage Calculation
Septic specialists believe that determining the appropriate septic tank size based on daily water use is the most accurate way. The average individual consumes around 75 gallons of water per day, but it is important to consider the water consumption of appliances such as dishwashers and washing machines. Homeowners may look at their electric bills to see how much energy they are consuming.
- 500 gallons or less: 900-gallon tank
- 500 to 700 gallons: 1,200-gallon tank
- 700 to 900 gallons: 1,500-gallon tank
- 900 to 1,240 gallons: 1,900-gallon tank
Budget-Based Calculation
Those who find themselves between two distinct tank sizes based on differing estimates may want to think about whether or not they will incur additional costs before making a selection. Increased capacity tanks will be more expensive up front, and every kind and size of tank will require pumping every three to five years, depending on the size of the tank. In these situations, it is possible that the budget will be the decisive factor. If you require a septic tank, you can rely on the professionals at Emerald Coast Wastewater Solutions.
Septic tank services in the Destin, FL region have been provided by us for more than two decades with dependability and efficiency. Get in touch with us immediately at (850) 842-4486 to schedule your free septic tank installation estimate.
How to Calculate Septic Tank Size
If you find yourself on the verge of needing a larger septic tank than you anticipated, be liberal with your calculations and purchase a little larger septic tank. When it comes to septic tanks, having a little excess space is preferable to not having enough. sewage can back up into your home if a septic tank is installed that is too small for the job. When installing a septic tank, it is critical that you determine the proper size for the job. The majority of towns require even the smallest septic tanks to carry a minimum of 1,000 gallons of wastewater.
Step 1
Calculate the number of inhabitants who will be utilizing your septic system on a regular basis. The majority of towns believe that a two-bedroom house will have four regular inhabitants, even though the property only has two bedrooms. A three-bedroom residence may accommodate up to six people.
Step 2
The number of bathrooms that will be served by the septic tank should be counted. If you just have one bathroom but want to add another in the future, make sure to include the second bathroom in your count to avoid having to replace your tank further down the line.
Step 3
In your home, make a list of all of the plumbing fittings you have. This figure includes all faucets, toilets, showers, dishwashers, laundry washers, and any other fixture that will drain into your septic tank. It does not include your water heater.
Step 4
Take your calculations to your local permit office, where they will be checked against your local rules in order to establish the acceptable septic tank sizing for your home or business. The guidelines for clothing sizing differ somewhat from one place to the next. As an example, in Arizona, a three-bedroom house with two bathrooms and around 20 fixtures requires a tank that holds approximately 1,250 gallons. A 2,000-gallon water tank is required for a structure with 14 residents and three to five bathrooms.
How to Calculate Septic Tank Size
Take your calculations to your local permit office, where they will be checked against your local rules in order to establish the right septic tank sizing for your home and yard. From one place to the next, the standards for clothing sizing differ slightly. When building a three-bedroom house with two bathrooms and around 20 fixtures in Arizona, the tank must hold at least 1,250 gallons of water. A 2,000-gallon tank is required for a building with 14 residents and three to five bathrooms.
Types of Septic Tanks
Septic tanks are commonly utilized in residential construction and can be classified into three categories.
- Septic tanks made of concrete
- Septic tanks made of polyethylene/plastic
- Septic tanks made of fiberglass
Construction of concrete septic tanks is the most popular, but because of their weight, they must be installed with heavy gear. Polyethylene and fiberglass are one-piece products that are significantly lighter than steel.
This makes them particularly well suited for isolated and difficult-to-reach locations. In order to determine whether or not you need a septic tank system, check with your local building department to see what laws and requirements apply to onsite wastewater treatment.
Why Choosing the Right Septic Tank Size Matters
sewage can back up into your home if a septic tank is installed that is too small and does not have enough holding capacity. When installing a septic tank, it is critical that you determine the proper size. The majority of towns require even the smallest septic tanks to carry a minimum of 1,000 gallons of wastewater. As the number of bedrooms, occupants, bathrooms, and fixtures that will be serviced by the septic system rises, the needed capacity for the system increases accordingly.
How Much Water Do You Use?
There are a variety of calculations that may be used to calculate the size of the septic tank that is required for your residence. The most precise and dependable method is to measure water consumption. The size of the septic tank that is required is determined by the amount of water that will be handled and then dispersed into the field lines of the property. It should be noted that the minimum capacity tank permitted in many regions of the nation is 1,000 gallons. The average individual consumes 50-100 gallons of water each day.
Try to keep these things in mind when you’re putting together your estimate.
As your water use increases, the distance between you and the rest of the world narrows.
Calculations by House Size
The number of bedrooms in your home, as well as the square footage of your home, are less precise guides for determining the size of your tank. What is the maximum number of bedrooms you can have with a 1,000 gallon septic tank? It is tough to say due to the fact that water consumption varies depending on your situation. These estimates are based on the assumption that all bedrooms will be occupied, and the anticipated water consumption is based on this assumption. It is impossible to do these calculations if you live alone in a three-bedroom house.
The suggested tank sizes are listed below, according to the number of bedrooms in the house.
- Three bedrooms under 2,500 square feet: 1,000 gallon tank
- Four bedrooms under 3,500 square feet: 1,200 gallon tank
- And five or six bedrooms under 5,500 square feet: 1,500 gallon tank
- One or two bedrooms under 1,500 square feet: 750 gallon tank
- Three bedrooms under 2,500 square feet: 1,000 gallon tank
Septic Tank Size Affects Pumping Schedule
The size of your septic tank is important because it determines how frequently it has to be pumped in order to stay working at top performance. As a general rule, we recommend that you pump your septic tank every three to five years; however, the smaller the tank, the more frequently it must be pumped. Tanks that are not maintained properly over an extended period of time are more likely to get clogged or fail, necessitating costly repairs or replacement.
Planning Your Drainfield
Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.
- Vehicles should not be allowed on or around the drainfield. It is not recommended to put trees or anything else with deep roots along the bed of the drain field since the roots of these plants frequently clog the pipes. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Make your septic tank lid as accessible as possible so that maintenance and inspection may be performed without difficulty. To aid with evaporation and erosion prevention, plant grass in the area.
Get Help Choosing the Right Septic Tank Size
Obviously, these figures are just intended to be used as a broad guideline, and the operation of the complete system is contingent on you getting your numbers exactly correct. It is important not to leave anything to chance. Make a phone call to West Coast Sanitation. Our professionals understand that you don’t have time to cope with septic system issues.
If you believe that your system has reached its maximum capacity, please contact us immediately to discuss your options. If you have any questions, we have specialists standing by to help you resolve them and get your system back up and running.
How Your Septic System Works
Underground wastewater treatment facilities, known as septic systems, are often employed in rural regions where there are no centralized sewage lines. They clean wastewater from residential plumbing, such as that produced by bathrooms, kitchen drains, and laundry, by combining natural processes with well-established technology. A conventional septic system is comprised of two components: a septic tank and a drainfield, often known as a soil absorption field. It is the septic tank’s job to decompose organic matter and to remove floatable stuff (such as oils and grease) and solids from wastewater.
Alternate treatment systems rely on pumps or gravity to assist septic tank effluent in trickling through a variety of media such as sand, organic matter (e.g., peat and sawdust), constructed wetlands, or other media to remove or neutralize pollutants such as pathogens that cause disease, nitrogen, phosphorus, and other contaminants.
Specifically, this is how a typical conventional septic system works:
- All of the water that leaves your home drains down a single main drainage pipe and into a septic tank. An underground, water-tight container, often composed of concrete, fiberglass, or polyethylene, serves as a septic system’s holding tank. Its function is to retain wastewater for a long enough period of time to allow particles to sink to the bottom and form sludge, while oil and grease float to the surface and produce scum. Sludge and scum are prevented from exiting the tank and moving into the drainfield region by compartments and a T-shaped outlet. After that, the liquid wastewater (effluent) exits the tank and flows into the drainfield. The drainfield is a shallow, covered hole dug in unsaturated soil that serves as a drainage system. Porous surfaces are used to release pretreated wastewater because they allow the wastewater to pass through the soil and into the groundwater. In the process of percolating through the soil, wastewater is accepted, treated, and dispersed by the soil, finally discharging into groundwater. Finally, if the drainfield becomes overburdened with too much liquid, it can flood, causing sewage to flow to the ground surface or resulting in toilet backups and sink backups. Finally, wastewater percolates into the soil, where it is naturally removed of harmful coliform bacteria, viruses, and nutrients. Coliform bacteria are a kind of bacteria that may be found in the intestines of humans and other warm-blooded animals, with humans being the most common host. As a result of human fecal contamination, it is a sign of this.
The Guadalupe-Blanco River Authority has built an animated, interactive model of how a residential septic system works, which you can view here.
Do you have a septic system?
It’s possible that you’re already aware that you have a septic system. If you are not sure, here are some tell-tale symptoms that you most likely are:
- You make use of well water. In your home, the water pipe that brings water into the house does not have a meter. In the case of a water bill or a property tax bill, you will see “$0.00 Sewer Amount Charged.” It is possible that your neighbors have a septic system
How to find your septic system
You can locate your septic system once you have confirmed that you have one by following these steps:
- Taking a look at the “as constructed” drawing of your house
- Making a visual inspection of your yard for lids and manhole covers
- Getting in touch with a septic system service provider for assistance in locating it
Failure symptoms: Mind the signs!
A bad odor is not necessarily the first indicator of a septic system that is failing to work properly. Any of the following signs should prompt you to seek expert assistance:
- Water backing up into the drains of homes and businesses
- It is especially noticeable in dry weather that the drainfield grass is bright green and spongy. The presence of standing water or muddy soil near your septic system or in your basement
- A strong stench emanating from the area surrounding the septic tank and drainfield
Purchasing a Home? What to Know About Septic System Capacity
A list of criteria, such as whether a property has a septic system and what condition it is in, is frequently created by families who are planning to acquire an existing home. The capacity of a septic system, on the other hand, is frequently overlooked. If you are a potential homebuyer who would want to learn more about septic system capacity and the reasons why it is vital, the information provided here can be of use to you. The Dimensions of a Septic Tank Septic tank capacity is normally measured in gallons, with many locations of the United States now requiring a minimum residential septic tank size of 1000 gallons for a residence with up to three bedrooms, according to the Environmental Protection Agency.
- In addition, while considering the size and capacity of a home’s septic system for their family size and the typical quantity of water they expect their household to consume each day, purchasers must consider a number of additional aspects.
- Keep in mind that some properties may have had restorations and expansions to accommodate more bedrooms without making commensurate upgrades to the septic system, making those homes less suited to meet the needs of a big family.
- The drainfield serves as a constant reminder of the need of this vital function since it receives the wastewater from the septic tank.
- Septic system designers must first establish the input flow rate in gallons, and then use that amount, together with the number of bedrooms in the residence, to determine the length and number of lateral lines in the drain field.
- Additionally, numerous factors other than the number of bedrooms can have an impact on the input flow rate, including whether or not the property is equipped with water-saving toilets and faucets, as well as the actual water consumption patterns of the residents.
- However, if a homeowner has to postpone replacement of their present system, there are several steps they may take to ensure that it continues to operate properly.
The first step should be to look at how the people who live in the house use water and make modifications to minimize that consumption as much as feasible, if at all possible. Among the recommendations are the following:
- Installing low-flow toilets, showerheads, and faucets
- Reducing water consumption Laundry and dishwashing machines should only be used when there are full loads. Putting right dripping faucets
Additional measures like as limiting activities such as taking long showers or leaving taps running while handwashing dishes or brushing and flossing teeth can assist to reduce total water use as well. Increased septic tank pumping frequency is another approach for alleviating the burden placed on an inadequate system by excessive waste accumulation. Pumping a septic system that is properly sized may only be necessary every two to five years, on average. Homeowners who have a septic tank that is too small or a drain field that is at risk of overloading may want to consider pumping the tank once or twice a year until they can remodel and expand the system.
At Pete’s Outflow Technicians, we are always ready to assist homeowners in taking excellent care of their septic systems at their residence.
A Beginner’s Guide to Septic Systems
- Septic systems are used to dispose of waste from homes and buildings. Identifying the location of the septic tank and drainfield
- What a Septic System Is and How It Works Keeping a Septic System in Good Condition
- Signs that a septic system is failing include:
Septic systems, also known as on-site wastewater management systems, are installed in a large number of buildings and houses. It is easy to lose sight of septic systems, which operate quietly, gracefully, and efficiently to protect human and environmental health due to their burying location. Septic systems are the norm in rural regions, but they may also be found in a lot of metropolitan places, especially in older buildings. It is critical to understand whether or not your building is on a septic system.
Is Your Home or Building on a Septic System?
Septic systems, which are often used to handle wastewater on-site, are found in many buildings and residences. It is easy to lose sight of septic systems, which operate quietly, gracefully, and efficiently to preserve human and environmental health due to their burying position. Despite the fact that septic systems are more widespread in rural regions, they may also be found in metropolitan settings. The location of your building on a septic system is critical information to have.
- Sewer service will be provided at a cost by the city or municipality. Pay close attention to the water bill to see whether there is a cost labeled “sewer” or “sewer charge” on it. If there is a fee for this service, it is most likely because the facility is connected to a sewage system. Look up and down the street for sewage access ports or manholes, which can be found in any location. If a sewage system runs in front of a property, it is probable that the house is connected to it in some way. Inquire with your neighbors to see if they are connected to a sewer or septic system. The likelihood that your home is on a sewer system is increased if the properties on each side of you are on one as well. Keep in mind, however, that even if a sewage line runs in front of the structure and the nearby residences are connected to a sewer system, your home or building may not be connected to one. If the structure is older than the sewer system, it is possible that it is still on the original septic system. Consult with your local health agency for further information. This agency conducts final inspections of septic systems to ensure that they comply with applicable laws and regulations. There is a possibility that they have an archived record and/or a map of the system and will supply this information upon request
All property owners should be aware of whether or not their property is equipped with an on-site wastewater treatment system. Georgia law mandates that the property owner is responsible for the correct operation of a septic system, as well as any necessary maintenance and repairs.
Locating the Septic Tank and Drainfield
Finding a septic system may be a difficult process. They can be buried anywhere in the yard, including the front, back, and side yards. After a few years, the soil may begin to resemble the surrounding soil, making it impossible to distinguish the system from the surrounding soil. It is possible that in dry weather, the grass will be dryer in the shallow soil over the tank and greener over the drainfield, where the cleansed water will be released, but this is not always the case, especially in hot weather.
- The contractor who built the house should have presented the initial owner with a map showing the tank and drainfield locations, according to the building code.
- The installation of the system, as well as any modifications made to it, would have been examined by your local health authority.
- Unfortunately, if the system is very old, any records related with it may be insufficient or nonexistent, depending on the situation.
- Look for the point at where the wastewater pipes join together if the building is on a crawlspace or has an unfinished basement.
- The sewer line that runs through the structure is referred to as the building sewer.
- To “feel” for the tank, use a piece of re-bar or a similar metal probe.
- If you use this free service, you may avoid accidentally putting a rod through your gas or water line.
Try to locate the tank after a rainstorm, when the metal probe will be more easily maneuvered through moist dirt.
This should be done with care; extreme caution should be exercised to avoid puncturing the building sewer.
A tank is normally 5 by 8 feet in size, however the dimensions might vary.
Be aware that there may be rocks, pipes, and other debris in the area that “feels” like the tank but is not in fact part of the tank.
However, it is possible to have the lid or access port positioned on a riser in addition to being on the same level as the top of the tank in some cases.
Once the tank has been identified, make a rough drawing of its placement in relation to the house so that it will not be misplaced again!
It may be easier to discover the drainage lines now that the tank has been identified, particularly if the area has been subjected to prolonged periods of drought.
How a Septic System Works
Typical sewage treatment system (figure 1). It is composed of three components (Figure 1): the tank, the drain lines or discharge lines, and the soil treatment area (also known as the soil treatment area) (sometimes called a drainfield or leach field). The size of the tank varies according to the size of the building. The average home (three bedrooms, two bathrooms) will typically have a 1,000-gallon water storage tank on the premises. Older tanks may only have one chamber, whereas newer tanks must have two chambers.
- The tank functions by settling waste and allowing it to be digested by microbes.
- These layers are the bottom sludge layer, the top scum layer, and a “clear” zone in the middle.
- A typical septic tank is depicted in Figure 2.
- It is fortunate that many of the microbes involved are found in high concentrations in the human gastrointestinal tract.
- Although the microbes can break down some of the material in the sludge, they are unable to break down all of it, which is why septic tanks must be pumped out every three to seven years.
- As new water comes into the septic tank, an equal water volume is pushed out the discharge lines and into the drainfield.
- The water trickles out the perforated drain lines, through a layer of gravel and into the soil (Figure 3).
- Figure 3.
- The soil is teeming with life.
- All these creatures help release nutrients and other compounds from the wastewater, using and reusing them in the soil and cleaning the water.
- The treated water eventually moves into ground water.
Maintaining a Septic System
The most typical reason for a septic system to fail is a lack of proper maintenance. Septic systems that are failing are expensive to repair or replace, and the expense of repairs rests on the shoulders of the property owner (Figure 4). Fortunately, keeping your septic system in good working order and avoiding costly repairs is rather simple. Figure 4. Septic system failure is frequently caused by a lack of proper maintenance. It is in your best interests to be aware of the location of the system, how it operates, and how to maintain it.
- You should pump the tank if you aren’t sure when the last time it was pumped.
- It is not permissible to drive or park over the tank or drainage field.
- No rubbish should be disposed of in the sink or the toilet.
- It’s important to remember that garbage disposals enhance the requirement for regular pumping.
- When designing a landscape, keep the septic system in mind.
- It is also not recommended to consume veggies that have been cultivated above drainfield lines (see Dorn, S.
- Ornamental Plantings on Septic Drainfields.
C 1030).
Any water that enters your home through a drain or toilet eventually ends up in your septic system.
Don’t put too much strain on the system by consuming a large amount of water in a short period of time.
Additives should not be used.
Various types of additives are available for purchase as treatment options, cleansers, restorers, rejuvenator and boosters, among other things.
To break up oil and grease and unclog drains, chemical additives are available for purchase.
Pumping out the septic tank is not eliminated or reduced by using one of these systems.
They remain floating in the water and travel into the drainfield, where they may block the pipes. Acids have the potential to damage concrete storage tanks and distribution boxes.
Signs a Septic System is Failing
A failed system manifests itself in the following ways:
- Sinks and toilets drain at a snail’s pace
- Plumbing that is backed up
- The sound of gurgling emanating from the plumbing system House or yard aromas that smell like sewage
- In the yard, there is wet or squishy dirt
- Water that is gray in hue that has accumulated
- An region of the yard where the grass is growing more quickly and is becoming greener
- Water contaminated by bacteria from a well
If you notice any of these indicators, you should notify your local health department immediately. An environmentalist from the health department can assist in identifying possible hazards. There are also listings of state-certified contractors available from the local health department, who may do repairs. Repairs or alterations to the system must be approved by the health department and examined by an inspector. Keep an eye out for any meetings that may take place between a health department inspector and a contractor to discuss repairs to your system.
- Household garbage that has not been properly handled is released into the environment when systems fail.
- It has the potential to pollute surrounding wells, groundwater, streams, and other sources of potable water, among other things.
- The foul odor emanating from a malfunctioning system can cause property values to plummet.
- Briefly stated, broken systems can have an impact on your family, neighbors, community, and the environment.
- Septic systems are an effective, attractive, and reasonably priced method of treating and disposing of wastewater.
Figures 2 and 3 reprinted with permission from: CIDWT. 2009. Installation of Wastewater Treatment Systems. Consortium of Institutes for Decentralized Wastewater Treatment. Iowa State University, Midwest Plan Service. Ames, IA.
History of the current status and revisions Published on the 15th of August, 2013. Published on March 28th, 2017 with a full review.
Do you need a bigger septic tank size?
When constructing, purchasing, or renting a home, it is critical to understand the appropriate septic tank size for the land being considered. A house with the incorrect septic tank size could put you in a difficult situation if the tank becomes overflowing prematurely. The government may order you to replace your septic tank, which may cost you thousands of dollars if it fails completely. To avoid this, make certain that the septic tank is the appropriate size from the beginning.
Using the number of bedrooms to determine septic tank size
The number of beds on a property must be taken into consideration when deciding the size of the septic tank to be installed on the land, according to the legislation. This is mostly due to the fact that the number of bedrooms will provide a clear indication of the maximum number of people who will be able to occupy the property. Because the septic tank will be the initial point of contact for all of the wastewater from the residence, it is important to choose the appropriate size. The effluent should be allowed to sit in the tank for at least 24 hours before it is discharged into the drainage system.
If this is not done, the solids will flow out of the tank and into the drain field, resulting in a blockage of the drain field and the tank. The recommended septic tank sizes for a home with a certain number of bedrooms are listed in the table below.
| Number of bedrooms | Minimum capacity in gallons |
| 1 – 3 | 750 |
| 4 | 850 |
| 5 – 6 | 1,050 – 1,500 |
Using water usage to determine the septic tank size
Even after determining the most appropriate septic tank size based on the number of bedrooms in the house, you may choose to take additional aspects into consideration. The water usage rates of two identically sized dwellings might be drastically different. For example, if you plan to use a garburator, the amount of wastewater that will be discharged into the septic tank will increase. It is possible that you may need to account for high-volume fixtures. The flow rates of some of the most regularly used plumbing fittings, as well as the predicted demand during peak periods, are included in the table below.
| USE | FLOW RATE (GALLONS PER MINUTE) | TOTAL USE (GALLONS) |
| Bathroom sink | 2 | 1-2 |
| Backwash filters | 10 | 100-200 /backwash cycle |
| Garbage disposer | 3 | 4-6 per day |
| Dishwasher | 2 | 5/load |
| Kitchen sink | 3 | 2-4/use |
| Shower/ tub | 5 | 25-60/use |
| Toilet flush (pre-1992 design) | 3 | 4-7/use |
| Toilet flush (high-efficiency design) | 3 | 1.28/use |
| Washing machine | 5 | 15-30/load |
Others factors that determine the size of the septic tank
Aside from the number of pumping chambers in a septic tank, the number of pumping chambers in a septic tank is another factor that may be used to calculate the size of the septic tank in some jurisdictions. For example, a septic tank with an incorporated lift station pumping chamber must have an extra capacity of 250 gallons in addition to the standard capacity. It is also necessary to take into consideration the local weather conditions in the location where the septic tank will be constructed.
In order to accommodate this, the septic tanks in these areas need be larger.
Legal requirements– before building and installing a septic system, it is usually a good idea to check to see if there are any legal standards that must be followed in the process.
In the event that you want to make any improvements to your house, such as the installation of another bedroom, you may want to consider installing a larger septic tank to accommodate the additional space.
Conclusion
Choosing the proper septic tank size will save you a lot of headaches in the long run. As a starting point, you will not be in contravention of any legal requirements that are in effect in your country. Additionally, by constructing the proper septic tank for your property, you can ensure that your septic system will operate properly and without interruptions throughout the year. It will also aid in the extension of the life of your septic system.
What Homeowners Should Know about Septic Tanks
If you own a house with a septic tank or are considering purchasing a home with a septic tank, it is critical that you understand how this system operates on your property.
What the benefits and drawbacks of having a septic tank are, where you could find one in South Florida, and what buyers should know about septic tanks before acquiring a house that has one are all covered in this article.
What Is a Septic Tank?
A septic tank is a vital part of any home, and understanding how it works is essential if you own a home with one or are thinking about purchasing one. What the benefits and drawbacks of having a septic tank are, where you could find one in South Florida, and what purchasers should know about septic tanks before acquiring a house that has one are all discussed in this article.
What Are the Pros and Cons of a Septic Tank?
Septic tank systems have a number of advantages and disadvantages that should be addressed before acquiring a house with a septic tank system or connecting a home to the municipal sewage system. The following are some of the advantages of a septic tank system:
- It is useful in regions where access to a sewer is either too expensive or unattainable. Installing and maintaining it is rather inexpensive. Water bills were reduced, and sewage fees were abolished.
The following are some of the disadvantages of a septic tank system:
- It is not possible to flush anything into the toilet tank that cannot be organically decomposed (such as hair, dental floss, grease, fat, diaper wipes, paper towels, and so on). It is not permitted to clean with bleach or other strong chemicals. Expenses associated with pumping every 2-5 years
Do All Homes Have Septic Tanks?
Septic tanks are installed in around 20% of residences in the United States. A septic tank is most typically seen in rural locations when there is a big amount of property separating neighbors from one another. However, in south Florida, they may be found in practically every city, which is a welcome relief. It is not possible to determine where to seek for them because there are no established restrictions, although they are generally located in lower-income regions where individuals do not want to spend the additional costs associated with having a public sewer system.
What Should Prospective Homeowners Know about Septic Tanks before Buying?
Only around 20% of homes in the United States are equipped with septic tanks, according to statistics. Septic tanks are most typically seen in rural locations, where there is a big quantity of property separating neighbors from one another. On the contrary, they may be found in almost every city in south Florida. It is not possible to determine where to seek for them because there are no established restrictions, although they are generally found in lower-income regions where residents do not wish to spend the additional costs associated with having a public sewer system installed.
- It is necessary to have a septic system examination performed before a title may be transferred. Remember that septic tanks can live up to 40 years or longer, so check the tank’s age before buying
- It is possible that you may need to replace your system at some time during your homeownership, which can cost upwards of $7,000 for a traditional system. Alternatives may be more expensive. Investigate whether or not the septic tank system has ever failed or required repairs in the past. Septic tanks are frequently hidden behind concrete and are not properly maintained. Leaving a septic tank unattended for an extended period of time will result in irreversible damage to the drain field
- In this instance, the only option is to dig up the entire yard (about 2000 SF depending on the number of bedrooms) and replace the tank. This is an extremely expensive project
Want to Learn More? Contact Our Team.
If you have any questions concerning septic tank systems, sewer systems, or any of the various methods through which your house handles wastewater, please don’t hesitate to contact our staff at Watermen Plumbing. For further information, please contact us online or by phone at (954) 800-6364 right now.
